
TP2TRANS
AssaadMH/mcu-sensor-firmware-studies
A set of small but complete embedded programs — PIC instrumentation with LCD readout, and an NFC tag reader.

A set of small but complete embedded programs — PIC instrumentation with LCD readout, and an NFC tag reader.
New Project is an open-source printed circuit board by AssaadMH, from the AssaadMH/mcu-sensor-firmware-studies repository on GitHub, published under the MIT licence. It is a 2-layer board of 39.8 × 41.6 mm with 12 parts on 9 nets, routed with 37 tracks and 0 vias.
Its parts include 3 capacitors, 2 resistors and 1 transistor. It belongs with the sensors and measurement boards of this library.
A set of small but complete embedded programs — PIC instrumentation with LCD readout, and an NFC tag reader.
2025·PIC·mikroC·Arduino·PN532 NFC·HD44780 LCD·ADC·I2C

A collection of the smaller embedded programs that make up the everyday practice behind the larger builds — each one complete, compiled and doing a real job on real silicon.
PIC instrumentation (mikroC). A digital tachometer that reads three analog channels through the ADC and drives a 16×2 HD44780 LCD in 4-bit mode; and a motor-speed program that computes RPM and voltage and switches a transistor output while displaying the reading. Both carry their full toolchain output — compiled hex, listing and assembly.
NFC reader. An Arduino program driving a PN532 module over I2C to read passive MIFARE / ISO 14443A tag UIDs and report them over serial — the access-control front end from an internship task.
None of these is a headline project, but together they are the reason the headline projects work: the LCD, ADC, I2C and serial groundwork that a bigger robot quietly depends on.
captures/
docs/
kicad/Everything in this repository is my own work. It builds on the following, which are not mine and are used under their own licences:
Lassaad Mahmoudi — assaadmahmoudi0@gmail.com
https://linkedin.com/in/mahmoudi-assaad
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | RES | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | 0.2, RC, RE, RL |
| 2 | 100000000pF | Capacitor_SMD:C_0603_1608Metric | C1, C3 |
| 1 | 15k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 180k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 220000000 | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 2N1711 | Package_TO_SOT_THT:TO-5-3 | Q1 |
| 1 | ALTERNATOR | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | ALTE?10 |
| 1 | VSOURCE | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | V1 |

AssaadMH/mcu-sensor-firmware-studies
A set of small but complete embedded programs — PIC instrumentation with LCD readout, and an NFC tag reader.

AssaadMH/mcu-sensor-firmware-studies
A set of small but complete embedded programs — PIC instrumentation with LCD readout, and an NFC tag reader.

AssaadMH/mcu-sensor-firmware-studies
A set of small but complete embedded programs — PIC instrumentation with LCD readout, and an NFC tag reader.

AssaadMH/mcu-sensor-firmware-studies
A set of small but complete embedded programs — PIC instrumentation with LCD readout, and an NFC tag reader.

github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!


google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards



hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:

stacksmashing/pico-tpmsniffer
A simple, very experimental TPM sniffer for LPC bus
It measures 39.8 × 41.6 mm and has 2 copper layers, 1.6 mm thick.
12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the AssaadMH/mcu-sensor-firmware-studies repository on GitHub, at the commit this page was made from: the board is kicad/New_Project/New_Project.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).