

Jumperless Probe
A probe for your Jumperless
- Size
- 123.2 × 25.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 18
- Nets
- 3
- Pads
- 418
- Tracks, vias
- 238, 0
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 24 Feb 2024
- Updated
- 5 Apr 2024
Overview
Jumperless Probe is an open-source printed circuit board by Architeuthis-Flux, from the Architeuthis-Flux/Jumperless-Probe repository on GitHub, published under the MIT licence. It is a 2-layer board of 123.2 × 25.4 mm with 18 parts on 3 nets, routed with 238 tracks and 0 vias.
Its parts include 4 connectors, 1 resistor and 1 switch. It belongs with the sensors and measurement boards of this library.
README
README.mdJumperless Probe
a thing to poke your Jumperless with
You can even wire an OLED to it and have it show you stuff while you're probing (the button is mounted under the display, so you press on the screen itself.
This is a less ghetto version of this:
If you don't feel like opening the schematic, here it is in text:
GPIO 18 ---------------------------------,
|
|- Button
| ~2.2KΩ
GPIO 19 ---------------------------------'----------------/\/\/\/\/\----------> ProbeOr you can put an LED on there and the signal from the probe will light it up when it's active
GPIO 18 ---------------------------------,
| |
~1KΩ Z |
Z |
| |- Button
| | ~2.2KΩ
\ /↘︎ LED |
Ť ↘︎ |
GPIO 19 ---------------------------------'----------------/\/\/\/\/\----------> ProbeAnd with this thing and a Jumperess, you can do this:
The footprint should basically support any button you can find laying around.
Parts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 2.2k | JumperlessFootprints:ResProbe | R1 |
| 1 | Conn_01x01 | JumperlessFootprints:Pad_Clip_Banana_Probe | J3 |
| 1 | Conn_01x01 | JumperlessFootprints:ProbeNeedle | J2 |
| 1 | Conn_01x01 | JumperlessFootprints:Pad_Clip_Banana_Button | J4 |
| 1 | Conn_01x02 | JumperlessFootprints:Probe_Header | J1 |
| 1 | SW_DIP_x01 | JumperlessFootprints:Switch_Universal | SW1 |
The 6 most common of 18 parts.
Similar boards
- 2 layers27.9 × 16.5 mm

- 2 layers42.7 × 13.7 mm

Stm32-mini12864
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
18 parts1.1kGPL-3.0 - 2 layers41.2 × 46.6 mm

- 2 layers44 × 51.3 mm

4272MAVcoder R4
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
18 parts915 - 2 layers28.3 × 14.3 mm

Tap Photosensor PCB
VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:
18 parts716GPL-3.0 - 2 layers20.3 × 15.2 mm

L0 stepper driver
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
18 parts546MIT - 2 layers

- 2 layers42.5 × 28.8 mm

C5VRX JACK DIY V2
Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS
18 parts515GPL-3.0
Questions
How big is the Jumperless Probe PCB?
It measures 123.2 × 25.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Jumperless Probe use?
18 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Jumperless Probe KiCad files?
From the Architeuthis-Flux/Jumperless-Probe repository on GitHub, at the commit this page was made from: the board is JumperlessProbe.kicad_pcb and its schematic JumperlessProbe.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Jumperless Probe design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).