
CanSat 2019 Bodenstation
ApoapsisHGV/CanSat2019-electronics
Circuit and PCB design files related to our 2019 CanSat competition

Circuit and PCB design files related to our 2019 CanSat competition
CanSat 2019 is an open-source printed circuit board by ApoapsisHGV, from the ApoapsisHGV/CanSat2019-electronics repository on GitHub, published under the MIT licence. It is a 6-layer board with 155 parts on 223 nets, routed with 1,420 tracks and 206 vias.
It is built around the ATTINY85-20SU, BME280 and DS18B20U, with the APDS-9960, TPS62132RGT and BNO055 among its other parts. Its parts include 46 capacitors, 39 resistors, 18 ICs, 7 diodes and 7 connectors. It belongs with the STM32 and AVR (ATmega, ATtiny) boards of this library.
Circuit and PCB design files related to our 2019 CanSat competition
| Qty | Value | Footprint | References |
|---|---|---|---|
| 34 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C26, C27 +18 |
| 16 | 10k | Resistor_SMD:R_0402_1005Metric | R2, R3, R8, R9, R10, R15, R16, R17, R19, R20, R22, R31, R32, R33, R35, R36 |
| 8 | 1M | Resistor_SMD:R_0402_1005Metric | R7, R12, R28, R29, R30, R37, R38, R39 |
| 5 | 4.7k | Resistor_SMD:R_0402_1005Metric | R4, R5, R23, R24, R25 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3mm_Pad | H1, H2, H3, H4 |
| 4 | SW_Push | Button_Switch_SMD:SW_SPST_B3U-1100P | SW1, SW2, SW3, SW4 |
| 3 | 50R | Resistor_SMD:R_0402_1005Metric | R14, R26, R27 |
| 3 | BME280 | digikey-footprints:Pressure_Sensor_LGA-8_2.5x2.5mm_BME280 | U12, U13, U14 |
| 3 | DS18B20U | Package_SO:MSOP-8_3x3mm_P0.65mm | U15, U16, U17 |
| 3 | RGBA | LED_SMD:LED_2.4mmx1.45mm_RGBA | D5, D7, D8 |
| 3 | SSM3J338R | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3 |
| 2 | 100k | Resistor_SMD:R_0402_1005Metric | R1, R18 |
| 2 | 100n | Capacitor_SMD:C_0402_1005Metric | C28, C33 |
| 2 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C4, C5 |
| 2 | 22uF | Capacitor_Tantalum_SMD:CP_EIA-3528-12_Kemet-T | C8, C11 |
| 2 | 270 | Resistor_SMD:R_0402_1005Metric | R13, R21 |
| 2 | GL5528 | OptoDevice:R_LDR_5.1x4.3mm_P3.4mm_Vertical | R6, R11 |
| 2 | GND | TestPoint:TestPoint_Pad_1.0x1.0mm | TP16, TP17 |
| 2 | LED | LED_SMD:LED_0603_1608Metric_Castellated | D4, D6 |
| 1 | 0734120114 | Connector_Coaxial:U.FL_Hirose_U.FL-R-SMT-1_Vertical | J6 |
| 1 | 10V | Diode_SMD:D_SOD-123 | D2 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C32 |
| 1 | 10uF | Capacitor_Tantalum_SMD:CP_EIA-3528-12_Kemet-T | C7 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R34 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C25 |
| 1 | 1uF | Capacitor_SMD:C_0402_1005Metric | C2 |
| 1 | 1uH | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L1 |
| 1 | 2.2uH | Inductor_SMD:L_Wuerth_MAPI-4020 | L2 |
| 1 | 20 Pin FFC | Connector_FFC-FPC:Hirose_FH12-20S-0.5SH_1x20-1MP_P0.50mm_Horizontal | J10 |
| 1 | 20Pin FFC | Connector_FFC-FPC:Hirose_FH12-20S-0.5SH_1x20-1MP_P0.50mm_Horizontal | J9 |
| 1 | 3.3n | Capacitor_SMD:C_0402_1005Metric | C10 |
| 1 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C30 |
| 1 | 505110-1292 FFC | Connector_FFC-FPC:Hirose_FH12-12S-0.5SH_1x12-1MP_P0.50mm_Horizontal | J5 |
| 1 | APDS-9960 | digikey-footprints:Ambient_Prox_APDS-9960 | U6 |
| 1 | ATTINY85-20SU | digikey-footprints:SOIC-8_W5.3mm | U21 |
| 1 | AVR-ISP-6 | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical_SMD | J8 |
| 1 | BNO055 | digikey-footprints:LGA-28_5.2x3.8mm_BNO0055 | U8 |
| 1 | BS-7 | Battery:BatteryHolder_Keystone_3000_1x12mm | BAT1 |
| 1 | Batt1+ | TestPoint:TestPoint_Pad_2.0x2.0mm | TP5 |
| 1 | Batt1- | TestPoint:TestPoint_Pad_2.0x2.0mm | TP6 |
| 1 | Batt2+ | TestPoint:TestPoint_Pad_2.0x2.0mm | TP7 |
| 1 | Batt2- | TestPoint:TestPoint_Pad_2.0x2.0mm | TP8 |
| 1 | Bottom+ | TestPoint:TestPoint_Pad_2.0x2.0mm | TP9 |
| 1 | Bottom- | TestPoint:TestPoint_Pad_2.0x2.0mm | TP10 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_CUI_CPT-9019S-SMT | BZ1 |
| 1 | CM1624 | Package_DFN_QFN:UDFN-16_3x1.5mm_P0.4 | U7 |
| 1 | Conn_SWD_10 | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical_SMD | J3 |
| 1 | DS18B20 3V3 | TestPoint:TestPoint_Pad_1.0x1.0mm | TP18 |
| 1 | DS18B20 GND | TestPoint:TestPoint_Pad_1.0x1.0mm | TP20 |
| 1 | D_Schottky | Diode_SMD:D_SMC | D1 |
| 1 | INA260 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U1 |
| 1 | JS202011SCQN | digikey-footprints:Switch_Slide_JS202011SCQN | S1 |
| 1 | M24M02-DRMN6TB | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U11 |
| 1 | MPU-9250 | Sensor_Motion:InvenSense_QFN-24_3x3mm_P0.4mm | U9 |
| 1 | Micro_SD_Card_Det_Hirose_DM3AT | Connector_Card:microSD_HC_Hirose_DM3AT-SF-PEJM5 | J7 |
| 1 | Nichrome + | TestPoint:TestPoint_Pad_1.0x1.0mm | TP11 |
| 1 | Nichrome - | TestPoint:TestPoint_Pad_1.0x1.0mm | TP13 |
| 1 | OneWire | TestPoint:TestPoint_Pad_1.0x1.0mm | TP19 |
| 1 | PA6H | RF_GPS:PA6H_GPS | U4 |
| 1 | Power_Select | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP5 |
| 1 | RFM69HCW | RF_Module:HOPERF_RFM9XW_SMD | U5 |
| 1 | SCl | TestPoint:TestPoint_Pad_1.0x1.0mm | TP14 |
| 1 | SDA | TestPoint:TestPoint_Pad_1.0x1.0mm | TP15 |
| 1 | SIT1533AI-H4-DCC-32_768E | digikey-footprints:Oscillator_MEMS_SIT1533AI-H4-DCC-32.768E | Y1 |
| 1 | STM32H743ZITx | Package_QFP:LQFP-144_20x20mm_P0.5mm | U2 |
| 1 | ST_RX | TestPoint:TestPoint_Pad_1.0x1.0mm | TP2 |
| 1 | ST_TX | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1 |
| 1 | Servo 3V3 | TestPoint:TestPoint_Pad_1.0x1.0mm | TP3 |
| 1 | Servo Control | TestPoint:TestPoint_Pad_1.0x1.0mm | TP4 |
| 1 | Servo GND | TestPoint:TestPoint_Pad_1.0x1.0mm | TP12 |
| 1 | TPS62132 | Package_DFN_QFN:VQFN-16-1EP_3x3mm_P0.5mm_EP1.68x1.68mm_ThermalVias | U3 |
| 1 | W25M02GV | SON127P600X500X80-9N:SON127P600X500X80-9N | U10 |

ApoapsisHGV/CanSat2019-electronics
Circuit and PCB design files related to our 2019 CanSat competition

ApoapsisHGV/CanSat2019-electronics
Circuit and PCB design files related to our 2019 CanSat competition

ApoapsisHGV/CanSat2019-electronics
Circuit and PCB design files related to our 2019 CanSat competition


EmielV2002/nRF_dev_board
A dev board utilizing the nRF53 and nPM1100 chip.

lucasasselli/keychain-tiny-game
Keychain reaction game to kill time while you wait your turn at the dentist office.


drewsum/LED_Panel_Controller
Controls a single 64x64 HUB75E LED Panel

harrydobbs/bbq-temperature-monitor
STM32 Microcontroller equipped with 2.4GHz Transceiver and K-Type Thermocouple


SunnyYoshimitsu/CelestiCall
An attempt at making a somewhat modern smartphone with many functions.
155 parts, built around the ATTINY85-20SU, BME280, DS18B20U and APDS-9960. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ApoapsisHGV/CanSat2019-electronics repository on GitHub, at the commit this page was made from: the board is CanSat_Top/CanSat_2019.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).