Skip to the content
4 layers90 × 80 mmTinyControlBoard, the printed circuit board in 3D
Size
90 × 80 mm
Copper layers
4
Thickness
1.6 mm
Parts
63
Nets
126
Pads
373
Tracks, vias
787, 272
Pours
4
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
1 Nov 2026
Updated
1 Nov 2026

Overview

TinyControlBoard is an open-source printed circuit board by AnthonyLRoy, from the AnthonyLRoy/kicad_dac_Projects repository on GitHub. It is a 4-layer board of 90 × 80 mm with 63 parts on 126 nets, routed with 787 tracks and 272 vias.

It is built around the ESP32-S3-WROOM-1U-N16, MAX6818EAP+T and LM3940IMPX-3.3, with the USBLC6-2SC6, S2761-46R and LG R971-KN-1 among its other parts. Its parts include 17 resistors, 13 capacitors, 8 ICs, 4 connectors and 3 diodes. It belongs with the ESP32 boards of this library.

Main components

11

Parts

63
QtyValueFootprintReferences
10S2761-46Rsamsys:S276146RTP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10
90u1samsys:CAPC1608X87NC3, C4, C5, C6, C9, C10, C11, C12, C13
622Rsamsys:RESC1609X55NR3, R8, R9, R11, R16, R19
4MountingHoleMountingHole:MountingHole_2.5mmH1, H2, H3, H4
3300Rsamsys:ERJH3R4, R6, R13
2100Rsamsys:ERJH3R1, R2
210Ksamsys:RESC1608X50NR12, R14
210usamsys:CAPC1608X90NC2, C8
2430182043816samsys:430182043816S2, S3
25K1samsys:RESC1608X55NR5, R10
270246-4001samsys:SHDR40W64P254_2X20_5842X889X947PJ3, J6
2LG_R971-KN-1samsys:LEDC2012X80ND1, D2
2MAX6818EAP+TPackage_SO:SSOP-20_5.3x7.2mm_P0.65mmIC2, IC3
11725672samsys:1725672J8
13214G-1-103Esamsys:3214G1103EVR1
1EG1206Asamsys:EG1206AS1
1ESP32-S3-WROOM-1U-N16samsys:ESP32S3WROOM1UN16IC6
1LM3940IMPX-3.3samsys:SOT230P700X180-4NIC4
1LS_R976samsys:LEDC2012X40ND3
1MCP23018-E_SOsamsys:SOIC127P1030X265-28NIC5
1MCT0603PD1001DP500samsys:RESC1608X55NR7
1STP16CPC26MTRsamsys:SOIC127P1032X265-24NIC1
1TNPW060315K0BEEAsamsys:RESC1608X60NR17
1TXS0108EPWRG4samsys:SOP65P640X120-20NIC7
1USBLC6-2SC6Package_TO_SOT_SMD:SOT-23-6U1
1USB_C_Receptacle_USB2.0_16PConnector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_HorizontalJ1
1u33samsys:CAPC1608X90NC1
1u47samsys:CAPC1608X90NC7

More from AnthonyLRoy/kicad_dac_Projects

11

Similar boards

  • 4 layers100 × 50 mmAUPWSW, the printed circuit board in 3D

    AUPWSW

    Michalek007/CurrentSensingCircuit

    University project for Analog Peripheral Circuits in Digital Systems.

    77 parts1
  • 4 layers70 × 54.5 mmInt debugger, the printed circuit board in 3D

    Int debugger

    TUDSSL/DIPS

    This is the official public repository for DIPS: Debugger for Intermittently-Powered Systems. The repository consists of all components that make DIPS: - Hardware - Debugger Firmware - Emulator Firmware - Emulator Host…

    224 parts
  • 6 layers86.3 × 91.9 mmEps re project, the printed circuit board in 3D

    Eps re project

    spacelab-ufsc/eps-re-hardware

    Hardware project of the EPS-RE module

    372 parts2CERN-OHL-S-2.0
  • 4 layers85.6 × 53.8 mmMuVox, the printed circuit board in 3D

    MuVox

    muvox-io/muVox

    Open Source Hardware Audio Amplifier

    128 parts84
  • 4 layersStm32f103rct6, the printed circuit board in 3D

    Stm32f103rct6

    TylerJulian/STM32F103RCT6-Dev-Board

    A stm32f103RCT6 Breakout board for Sooner Competitive Robotics and Personal use.

    44 parts1
  • 4 layers101.6 × 76.2 mmPco2-sensor board, the printed circuit board in 3D

    Pco2-sensor board

    NOAA-PMEL/ASVCO2

    Open Source Repository for the Autonomous Surface Vehicle CO2 (ASVCO2) gen2 system

    154 parts
  • 2 layers100 × 100 mmLEOS power, the printed circuit board in 3D

    LEOS power

    VIP-LES/leos-power-pcb

    62 parts

Questions

How big is the TinyControlBoard PCB?

It measures 90 × 80 mm and has 4 copper layers, 1.6 mm thick.

What parts does the TinyControlBoard use?

63 parts, built around the ESP32-S3-WROOM-1U-N16, MAX6818EAP+T, LM3940IMPX-3.3 and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the TinyControlBoard KiCad files?

From the AnthonyLRoy/kicad_dac_Projects repository on GitHub, at the commit this page was made from: the board is tinyControlBoard/tinyControlBoard.kicad_pcb and its schematic CapBank2/CapacitorBank/CapacitorBank.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the TinyControlBoard design in my own project?

Its repository states no licence, so its author keeps all rights: ask AnthonyLRoy before reusing the design.