
XIAO AUDIO
mmontee/nrf52840_openWSN_sensor_node
This projects goal is to implement a acoustic sensor node using the XIAO nrf52840 and openWSN.

A comprehensive, multi-sensor IoT telemetry dashboard built around the Freenove ESP32-WROOM development board. This custom KiCad printed circuit board (PCB) integrates precision environmental sensing, analog ambient monitoring, local edge storage, and a physical user interface featuring a TFT display and rotary encoder.
ESP32-IOT PCB is an open-source printed circuit board by AnmolS-EE, from the AnmolS-EE/ESP32-IOT-PCB repository on GitHub, published under the MIT licence. It is a 2-layer board of 95 × 94.1 mm with 53 parts on 47 nets, routed with 393 tracks and 63 vias.
It is built around the BME280, ENS160-BGLT and DM3D-SF, with the AMS1117-1.8 and S8550 among its other parts. Its parts include 18 resistors, 14 capacitors, 4 diodes, 4 connectors and 3 ICs. It belongs with the home automation and IoT and sensors and measurement boards and the ESP32 boards of this library.
A comprehensive, multi-sensor IoT telemetry dashboard built around the Freenove ESP32-WROOM development board. This custom KiCad printed circuit board (PCB) integrates precision environmental sensing, analog ambient monitoring, local edge storage, and a physical user interface featuring a TFT display and rotary encoder.
VDD).Before committing to the final surface-mount PCB layout and premium I2C environmental sensors, the core user interface, hardware interrupts, and analog subsystems were validated on a breadboard.
Note on Firmware Migration: The prototype code below uses a DHT11 for basic baseline logic. The final PCB firmware migrates away from standard digital pins to an I2C-driven topology to support the BME280 and ENS160 sensors.
Distributed under the MIT License. See LICENSE for details.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 10K | Resistor_SMD:R_0805_2012Metric | R8, R9, R11, R14, R15, R16, R17, R18, R19 |
| 8 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C2, C3, C7, C9, C11, C12, C13, C14 |
| 4 | 510 | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4 |
| 4 | LED | LED_THT:LED_D3.0mm | D1, D2, D3, D4 |
| 3 | LOGO | LOGO | G***, G***, G*** |
| 3 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric | C8, C10 |
| 2 | 4.7K | Resistor_SMD:R_0805_2012Metric | R5, R6 |
| 2 | Conn_01x20_Socket | Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_Vertical | J1, J2 |
| 1 | 0.015u | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C6 |
| 1 | 100u | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C1 |
| 1 | 10u | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C4 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric | R10 |
| 1 | 22u | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C5 |
| 1 | 47K | Resistor_SMD:R_0805_2012Metric | R12 |
| 1 | 50K | Potentiometer_SMD:Potentiometer_Bourns_3314J_Vertical | RV1 |
| 1 | AMS1117-1.8 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | BME280 | Package_LGA:Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumbering | U1 |
| 1 | DM3D-SF | Micro_SD_Card:HRS_DM3D-SF | J3 |
| 1 | ENS160-BGLT | Custom_Sensors:XDCR_ENS160-BGLT | U3 |
| 1 | Microphone | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | MK1 |
| 1 | Photoresistor | OptoDevice:R_LDR_5.1x4.3mm_P3.4mm_Vertical | R7 |
| 1 | RGB-TFT Screen | Custom_Screens:1.8_128x160_RGB-TFT | J4 |
| 1 | RotaryEncoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW1 |
| 1 | S8550 | Package_TO_SOT_THT:TO-92_Inline | Q1 |

mmontee/nrf52840_openWSN_sensor_node
This projects goal is to implement a acoustic sensor node using the XIAO nrf52840 and openWSN.

SREERAJSVT/AIQPCB
An IoT-enabled multisensor platform for real-time monitoring, visualization, and predictive analysis of indoor air quality (IAQ) parameters

Matthew-Bon/moon_child
A rocket flight computer to support CBJAMO's amoral interests.

C-yue28/Flight_Controller
6-layer custom flight controller PCB, incorporating a battery management system (BMS), 6-axis IMU, dedicated BLDC/servo control/power lines, and camera lines. Uses the ESP32-WROOM-1 as the central microcontroller.


hasenbanck/heteromycin
A 3D printer board using a powerfull STM32 MCU, TMC5160/TMC2160 driver and a Raspberry Pi or compatible SBC

atomic14/esp32-tv-hardware
This is Work In Progress - I'm still working on this.

It measures 95 × 94.1 mm and has 2 copper layers, 1.6 mm thick.
53 parts, built around the BME280, ENS160-BGLT, DM3D-SF and AMS1117-1.8. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the AnmolS-EE/ESP32-IOT-PCB repository on GitHub, at the commit this page was made from: the board is Hardware/ESP32_IOT_PCB.kicad_pcb and its schematic Hardware/Analog_Audio.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).