
Bottom plate
AndrophageKB/androphage
A folding ergonomic keyboard with a trackball.

A folding ergonomic keyboard with a trackball.
Matrix plate is an open-source printed circuit board by AndrophageKB, from the AndrophageKB/androphage repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 2-layer board of 269.2 × 122.8 mm with 73 parts on 80 nets, routed with 1,043 tracks and 85 vias.
It is built around the SMD0805-050-16V. It belongs with the keyboards and input and lEDs and displays boards of this library.

There have been keyboards that are portable and there have been keyboards that have integrated pointing devices, but to date there haven't been any keyboards that combine both features. With this new design I intend to change that.
I'm reaching the end of the design phase on my new keyboard, Androphage. It's a folding unibody split keyboard with 44 keys and a finger trackball in the center. When the keyboard is closed, all the more delicate components --- switches, keycaps, screen --- are protected inside the rugged SLS nylon case. Additionally the trackball is secured in-place by the folding base of the keyboard.
Unibody with fixed 15° split angle* and 10° tent angle.
44 keys: 3x5, plus 4 thumb keys, row 5** middle and ring finger keys, and key that can either be a very tucked thumb key or a row 5 index finger key.
Rugged SLS nylon case.
NRF52850 microcontroller and ZMK firmware for Bluetooth, dongle, or wired connectivity.
Dual-sensor 34mm trackball is capable of 3-axis control, i.e. twist-to-scroll à la Kensington SlimBlade.
Nice!View or similar screen for layer, pairing, and charging status.
Low power consumption microcontroller and trackball sensors (PMW3610) paired with a 300 mAh LiPo battery for days or weeks of battery life.
USB-C charging and connectivity.
Designed for Chicago Steno or KLP Lamé keycaps but can potentially be adapted for other low-to-mid-profile keycaps.
The custom hinges are SLM stainless steel for maximum durability.
There is space inside the base for storing the charging cable.
Unfolded dimensions: 290 x 135 x 62 mm
Folded dimensions: 148 x 135 x 45 mm
* Measured between the centerline of the keyboard and the axis of the index finger key column.
** That is, two rows below the home row, equivalent to the modifier row on an ANSI/ISO keyboard.






This project is licensed under the CERN Open Hardware License, Strongly Reciprocal 2.0.
Well, I saw the thing comin' out of the sky
It had a-one long horn and one big eye
I commenced to shakin' and I said, "Ooh-eee!
It looks like a purple people eater to me!"
—Sheb Wooley
| Qty | Value | Footprint | References |
|---|---|---|---|
| 44 | SW_Push_45deg | footprints:SW_GLP_Kailh_Choc_V1V2_HotSwap_PTH | S_L_00, S_L_01, S_L_02, S_L_03, S_L_04, S_L_10, S_L_11, S_L_12, S_L_13, S_L_14, S_L_15, S_L_20, S_L_21, S_L_22, S_L_23, S_L_24 +28 |
| 12 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R_L_A0, R_L_A1, R_L_A2, R_L_RST_1, R_L_SCL_1, R_L_SDA_1, R_R_A0, R_R_A1, R_R_A2, R_R_RST_1, R_R_SCL_1, R_R_SDA_1 |
| 2 | 5.1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R_USB_1, R_USB_2 |
| 2 | MCP23017_SS | Package_SO:SSOP-28_5.3x10.2mm_P0.65mm | U_L_EXT_1, U_R_EXT_1 |
| 2 | vik-module-connector | footprints:vik-module-connector-horizontal | J_L_VIK_1, J_R_VIK_1 |
| 1 | 270 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R_B_270 |
| 1 | 330 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R_G_330 |
| 1 | 470 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R_R_470 |
| 1 | LED_ARGB | LED_SMD:LED_Kingbright_APFA3010_3x1.5mm_Horizontal | D_CHG1 |
| 1 | SMD0805-050-16V | Fuse:Fuse_0805_2012Metric_Pad1.15x1.40mm_HandSolder | F_USB_1 |
| 1 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_E-Switch_TL3301NxxxxxG | SW_RST_1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J_USB_1 |
| 1 | ~ | Inductor_SMD:L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | FB_USB_1 |
The 70 most common of 73 parts.

AndrophageKB/androphage
A folding ergonomic keyboard with a trackball.

Unified-Daughterboard/UDB-S
Narrow variant unified daughterboards for custom keyboard designers and users

stanleyondrus/ILDAWaveX16
ILDAWaveX16 is an open-source, high-resolution, wireless laser DAC with SD-card playback, network control, and ILDA output.


1upkeyboards/PCBs
Repository containing production files and schematics for 1upkeyboards pcbs

jridgewell/HE75
A standard 60% keyboard featuring 75 hall effect keys in an ortholinear layout



It measures 269.2 × 122.8 mm and has 2 copper layers, 1.6 mm thick.
73 parts, built around the SMD0805-050-16V. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the AndrophageKB/androphage repository on GitHub, at the commit this page was made from: the board is pcb/matrix_plate/matrix_plate.kicad_pcb and its schematic pcb/bottom_plate/bottom_plate.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).