Skip to the content
4 layers40 × 9 mmUDB S, the printed circuit board in 3D

Narrow variant unified daughterboards for custom keyboard designers and users

Size
40 × 9 mm
Copper layers
4
Thickness
1.61 mm
Parts
11
Nets
10
Pads
64
Tracks, vias
129, 24
Pours
1
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
17 Sep 2022
Updated
30 Mar 2024

Overview

UDB S is an open-source printed circuit board by Unified-Daughterboard, from the Unified-Daughterboard/UDB-S repository on GitHub, published under the MIT licence. It is a 4-layer board of 40 × 9 mm with 11 parts on 10 nets, routed with 129 tracks and 24 vias.

It is built around the TPD4E05U06DQAR, ESD5Z5V0 and GZ2012D601TF, with the SMD0805-050-16V and TYPE-C-31-M-12 among its other parts. Its parts include 2 resistors, 2 connectors, 1 IC, 1 diode and 1 fuse.

Main components

5

README

README.md

Unified Daughterboard S Series

banner

Introduction

The Unified Daughterboard Project is an open standard to unify the USB daughterboards used in custom mechanical keyboard projects.
The Unified Daughterboard allows designers to easily implementing electrical protection via a tested proven PCB, and allows users to maintain and repair their keyboards in the future.

For more details on the Unified Daughterboard project, see the main website.

S Series

The S1 variant was developed as an entirely new form factor from the older C3 version based on real-world production usage and designer input.

  • "Wide and narrow" 40mm wide x 9mm deep x 1.6mm thick form factor
    • Avoids obstacles such as weights commonly found in custom keyboards
    • Mountable both right-side-up and upside-down
  • 2 x M3 mounting points
    • Fewer large screw taps reduce thread defect issues and assembly effort
  • Easy and inexpensive to source via JLCPCB or similar
  • Large DB corner radii which allow keyboard cases to be milled at a large inner radius
  • ESD protection, overcurrent protection, overvoltage protection, shielding noise decoupling, and single-path grounding to chassis functionality
  • New Molex Pico-EZmate Connector, replacing the JST-SH on previous versions
  • 1:1 connector pinout to retain compatibility with existing PCBs

Using the S series uDB in your design

Please visit the docs for detailed implementation references and notices.

Previews

Render Render

Credits

C3 Unified:

Parts

11
QtyValueFootprintReferences
25.1kResistor_SMD:R_0402_1005MetricR1, R2
178171-0004locallib:PicoEZMate-Reinforced-LiteJ2
1ESD5Z5V0Diode_SMD:D_SOD-523D1
1GZ2012D601TFInductor_SMD:L_0805_2012MetricFB1
1LOGOlocallib:UnifiedLogoG***
1MountingHoleMountingHole:MountingHole_3.2mm_M3_DIN965_Pad_TopBottomH1
1MountingHoleMountingHole:MountingHole_3.2mm_M3_DIN965_Pad_TopOnlyH2
1SMD0805-050-16VFuse:Fuse_1206_3216MetricF1
1TPD4E05U06DQARacheron_Components:USON-10_2.5x1.0mm_P0.5mmU1
1TYPE-C-31-M-12locallib:HRO-TYPE-C-31-M-12-AssemblyJ1

Similar boards

  • 2 layers278.3 × 81.9 mmSherie, the printed circuit board in 3D

    Sherie

    flora495/Sherie

    122 parts
  • 2 layers22 × 25 mmDb rev1, the printed circuit board in 3D

    Db rev1

    jemmec/legshark

    An open source 60% (15 by 5) ortholinear keyboard designed with both flexability and familiarity in mind.

    20 parts3MIT
  • 2 layers12 × 33.5 mmUsbport, the printed circuit board in 3D

    Usbport

    RetroTournaments/nesceptor

    Hardware mod for 1985 NES

    9 parts5GPL-3.0
  • 2 layers342.9 × 109.6 mmDynamis, the printed circuit board in 3D

    Dynamis

    bbrfkr/dynamis-keyboard

    199 parts24MIT
  • 2 layers221.5 × 172.5 mmAccelerator, the printed circuit board in 3D

    Accelerator

    bbrfkr/accelerator-keyboard

    279 partsMIT
  • 4 layers194.2 × 160 mmInterface, the printed circuit board in 3D

    Interface

    Kargo/MechBoard

    For typing, you know?

    92 parts
  • 2 layers35.6 × 94.6 mmUsb3sun, the printed circuit board in 3D

    Usb3sun

    delan/usb3sun

    usb input adapter for sun workstations

    60 parts45ISC

Questions

How big is the UDB S PCB?

It measures 40 × 9 mm and has 4 copper layers, 1.61 mm thick.

What parts does the UDB S use?

11 parts, built around the TPD4E05U06DQAR, ESD5Z5V0, GZ2012D601TF and SMD0805-050-16V. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the UDB S KiCad files?

From the Unified-Daughterboard/UDB-S repository on GitHub, at the commit this page was made from: the board is udb-s.kicad_pcb and its schematic udb-s.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the UDB S design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).