Skip to the content
2 layers65 × 30 mmAnavi play phat, the printed circuit board in 3D

Simple open source hardware keyboard for playing games on Raspberry Pi

Size
65 × 30 mm
Copper layers
2
Thickness
1.6 mm
Parts
25
Nets
16
Pads
106
Tracks, vias
127, 4
Pours
2
Routed
Yes
KiCad
KiCad 4
Created
24 Jun 2018
Updated
30 Jul 2018

Overview

Anavi play phat is an open-source printed circuit board by AnaviTechnology, from the AnaviTechnology/anavi-play-phat repository on GitHub. It is a 2-layer board of 65 × 30 mm with 25 parts on 16 nets, routed with 127 tracks and 4 vias.

It is built around the CAT24C32WI-GT3. Its parts include 5 resistors, 1 capacitor and 1 IC. It belongs with the keyboards and input boards of this library.

Main components

1

README

README.md

Anavi Play pHAT

Anavi Play pHAT is a simple open source hardware keyboard for Raspberry Pi pHAT (add-on board). Furthermore it supports reading data from various I2S sensor modules. It features:

  • Eight buttons
  • Slots for up to 3 plug and play I2C sensors for temperature, barometric pressure, humidity and light
  • EEPROM

License

The project is released under the Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0).

Note: This is a human-readable summary of (and not a substitute for) the license.

You are free to:

Share — copy and redistribute the material in any medium or format Adapt — remix, transform, and build upon the material for any purpose, even commercially. The licensor cannot revoke these freedoms as long as you follow the license terms. Under the following terms:

Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use. ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original. No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits. Notices:

You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation. No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.

You will have to provide a link to the original creator of the project http://www.anavi.technology on any documentation or website.

Credit can be attributed through a link to the creator website: http://www.anavi.technology

Parts

25
QtyValueFootprintReferences
6SW_DIP_x01Buttons_Switches_ThroughHole:SW_PUSH_6mm_h4.3mm<, <, >, >, A, B
44.7KResistors_SMD:R_0603_HandSolderingR2, R3, R4, R5
4MountingHole_2.7mm_M2.5_DIN965_PadMounting_Holes:MountingHole_2.7mm_M2.5_DIN965_PadREF1, REF2, REF3, REF4
3I2C_SENS_1Pin_Headers:Pin_Header_Straight_1x04SENS1, SENS2, SENS3
2SW_DIP_x01switches:SW_PUSH_6mm_h4.3mmSELECT, START
10.1Capacitors_SMD:C_0603_HandSolderingC1
11KResistors_SMD:R_0603_HandSolderingR1
1CAT24C32WI-GT3Housings_DIP:DIP-8_W7.62mmU1
1JUMPERPin_Headers:Pin_Header_Straight_1x02JP1
1LOGOlogo:anavi-logo
1Raspberry_PIPin_Headers:Pin_Header_Straight_2x20RASP_CONN1

Similar boards

  • 4 layers65 × 56.5 mm2019-07-03 17:28:54 fpga hat, the printed circuit board in 3D

    2019-07-03 17:28:54 fpga hat

    Wren6991/Snowflake-FPGA

    A cheap iCE40 development board, designed on and for Raspberry Pi

    90 parts31
  • 2 layers65 × 30 mmInfra pHAT, the printed circuit board in 3D

    Infra pHAT

    AnaviTechnology/anavi-infrared

    ANAVI Infrared pHAT is an open source hardware Raspberry Pi pHAT (add-on board) for rapid prototyping of Internet of Things (IoT) powered by free and open source software. It features:

    26 parts22
  • 2 layers65 × 30 mmGardening pHAT, the printed circuit board in 3D

    Gardening pHAT

    AnaviTechnology/anavi-gardening

    ANAVI Gardening uHAT is an open source hardware add-on board for Raspberry Pi that helps you develop smart solutions for monitoring and growing plants.

    27 parts11
  • 2 layers65 × 30 mmAnavi light, the printed circuit board in 3D

    Anavi light

    AnaviTechnology/anavi-light

    Anavi Light pHAT is an open source hardware Raspberry Pi pHAT (add-on board) for controlling RGB LED strip powered by free and open source software. It features:

    27 parts11
  • 2 layers65 × 56 mmRaspberyPI Hat, the printed circuit board in 3D

    RaspberyPI Hat

    AnaviTechnology/anavi-flex

    ANAVI Flex Raspberry Pi HAT

    46 parts8
  • 2 layers65 × 30 mmPiStripe uHAT, the printed circuit board in 3D

    PiStripe uHAT

    pief/PiStripe_uHAT

    LED stripe add-on board for the Raspberry Pi

    46 parts5
  • 2 layers173.5 × 85 mmWhitterm hat, the printed circuit board in 3D

    Whitterm hat

    tuna-f1sh/whitterm-wt220

    Design files, firmware and linux scripts for my /clever/ serial terminal, the Whitterm-220 - WT-220.

    208 parts4GPL-3.0
  • 2 layersUZ80, the printed circuit board in 3D

    UZ80

    adzierzanowski/z80

    Zilog Z80 (and Intel 8080) assembler/disassembler for everyone and some other tools for my private Z80 stuff

    112 parts2

Questions

How big is the Anavi play phat PCB?

It measures 65 × 30 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Anavi play phat use?

25 parts, built around the CAT24C32WI-GT3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Anavi play phat KiCad files?

From the AnaviTechnology/anavi-play-phat repository on GitHub, at the commit this page was made from: the board is anavi-play-phat.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Anavi play phat design in my own project?

Its repository states no licence, so its author keeps all rights: ask AnaviTechnology before reusing the design.