Skip to the content
2 layers65 × 30 mmInfo pHAT, the printed circuit board in 3D

Raspberry Pi HAT for attaching a mini I2C OLED display and other I2C peripherals.

Size
65 × 30 mm
Copper layers
2
Thickness
1.6 mm
Parts
26
Nets
17
Pads
106
Tracks, vias
214, 6
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
21 Jan 2020
Updated
11 Apr 2022

Overview

Info pHAT is an open-source printed circuit board by AnaviTechnology, from the AnaviTechnology/anavi-info-uhat repository on GitHub. It is a 2-layer board of 65 × 30 mm with 26 parts on 17 nets, routed with 214 tracks and 6 vias.

It is built around the CAT24C32WI-GT3, KP-3216EC and KP-3216SGC. Its parts include 7 resistors, 3 switches, 2 diodes, 1 capacitor and 1 IC. It belongs with the lEDs and displays boards of this library.

Main components

3

README

README.md

ANAVI Info uHAT

ANAVI Info uHAT is an open source hardware Raspberry Pi uHAT (add-on board) for rapid prototyping of Internet of Things (IoT) powered by free and open source software. It features:

  • 3 Buttons
  • Red and green indication LEDs
  • Slot of mini OLED I2C display
  • Slots for up to 3 plug and play I2C sensors for temperature, barometric pressure, humidity and light
  • UART (Universal asynchronous receiver/transmitter) pins for debugging

Safety Information

English

Warnings

  • This product shall only be connected to a compatible Raspberry Pi.

Instructions for safe use

  • Do not expose this product to water or moisture, and do not place it on a conductive surface whilst in operation.
  • Do not expose this product to heat from any source; it is designed for reliable operation at normal room temperatures.
  • Take care while handling this product to avoid mechanical or electrical damage to the printed circuit board and connectors.
  • Avoid handling this product while it is powered. Only handle by the edges to minimize the risk of electrostatic discharge damage.

Deutsch

Achtung

  • Dieses Produkt darf nur mit einem kompatiblen Raspberry Pi verbunden werden.

Anweisungen für die sichere Verwendung

  • Setzen Sie dieses Produkt nicht Wasser oder Feuchtigkeit aus und stellen Sie es während des Betriebs nicht auf eine leitfähige Oberfläche.
  • Setzen Sie dieses Produkt keiner Wärmequelle aus. Es ist für einen zuverlässigen Betrieb bei normalen Raumtemperaturen ausgelegt.
  • Seien Sie vorsichtig beim Umgang mit diesem Produkt, um mechanische oder elektrische Schäden an der Leiterplatte und den Anschlüssen zu vermeiden.
  • Vermeiden Sie die Handhabung dieses Produkts während der Stromversorgung. Produkt nur an den Rändern anfassen, um das Risiko von elektrostatischen Entladungsschäden zu minimieren.

License

The project is released under the Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0).

Note: This is a human-readable summary of (and not a substitute for) the license.

You are free to:

Share — copy and redistribute the material in any medium or format Adapt — remix, transform, and build upon the material for any purpose, even commercially. The licensor cannot revoke these freedoms as long as you follow the license terms. Under the following terms:

Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use. ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original. No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits. Notices:

You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation. No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.

You will have to provide a link to the original creator of the project http://www.anavi.technology on any documentation or website.

Credit can be attributed through a link to the creator website: http://www.anavi.technology

Parts

26
QtyValueFootprintReferences
44.7KResistors_SMD:R_0603_HandSolderingR2, R3, R4, R5
4MountingHole_2.7mm_M2.5_DIN965_PadMounting_Holes:MountingHole_2.7mm_M2.5_DIN965_PadREF1, REF2, REF3, REF4
3I2C_SENS_1Pin_Headers:Pin_Header_Straight_1x04SENS1, SENS2, SENS3
3SW_DIP_x01Buttons_Switches_ThroughHole:SW_PUSH_6mm_h4.3mmSW1, SW2, SW3
2270RResistors_SMD:R_0603_HandSolderingR6, R7
10.1Capacitors_SMD:C_0603_HandSolderingC1
11KResistors_SMD:R_0603_HandSolderingR1
1CAT24C32WI-GT3Housings_DIP:DIP-8_W7.62mmU1
1CONN_01X04Pin_Headers:Pin_Header_Straight_1x04UART
1DISPLAY1Pin_Headers:Pin_Header_Straight_1x04DISPLAY
1JUMPERPin_Headers:Pin_Header_Straight_1x02JP1
1KP-3216ECLED_SMD:LED_1206_3216MetricD1
1KP-3216SGCLED_SMD:LED_1206_3216MetricD2
1LOGOlogo:anavi-logo
1Raspberry_PIPin_Headers:Pin_Header_Straight_2x20RASP_CONN1

Similar boards

  • 2 layers65 × 30 mmGardening pHAT, the printed circuit board in 3D

    Gardening pHAT

    AnaviTechnology/anavi-gardening

    ANAVI Gardening uHAT is an open source hardware add-on board for Raspberry Pi that helps you develop smart solutions for monitoring and growing plants.

    27 parts11
  • 2 layers74.9 × 40.6 mmAnavi gas detector, the printed circuit board in 3D

    Anavi gas detector

    AnaviTechnology/anavi-gas-detector

    WiFi development board for MQ gas sensors

    31 parts6
  • 2 layers65.3 × 32.8 mmAnavi miracle emitter, the printed circuit board in 3D

    Anavi miracle emitter

    AnaviTechnology/anavi-miracle-emitter

    USB-C WS2812B WiFi controller

    19 parts4
  • 2 layers57.7 × 47.2 mmAnavi gardening controller, the printed circuit board in 3D

    Anavi gardening controller

    AnaviTechnology/anavi-gardening-controller

    Open source hardware IoT gardening controller with XIAO ESP32C3, soil moisture sensors, I2C sensors and mini OLED display

    20 parts
  • 2 layers94 × 94 mmUsb2most, the printed circuit board in 3D

    Usb2most

    smartgauges/usb2most

    USB to MOST adapter

    124 parts26GPL-3.0
  • 4 layers65 × 56.5 mm2019-07-03 17:28:54 fpga hat, the printed circuit board in 3D

    2019-07-03 17:28:54 fpga hat

    Wren6991/Snowflake-FPGA

    A cheap iCE40 development board, designed on and for Raspberry Pi

    90 parts31
  • 2 layers65 × 30 mmInfra pHAT, the printed circuit board in 3D

    Infra pHAT

    AnaviTechnology/anavi-infrared

    ANAVI Infrared pHAT is an open source hardware Raspberry Pi pHAT (add-on board) for rapid prototyping of Internet of Things (IoT) powered by free and open source software. It features:

    26 parts22
  • 2 layers65 × 30 mmAnavi light, the printed circuit board in 3D

    Anavi light

    AnaviTechnology/anavi-light

    Anavi Light pHAT is an open source hardware Raspberry Pi pHAT (add-on board) for controlling RGB LED strip powered by free and open source software. It features:

    27 parts11

Questions

How big is the Info pHAT PCB?

It measures 65 × 30 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Info pHAT use?

26 parts, built around the CAT24C32WI-GT3, KP-3216EC and KP-3216SGC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Info pHAT KiCad files?

From the AnaviTechnology/anavi-info-uhat repository on GitHub, at the commit this page was made from: the board is Info-pHAT.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Info pHAT design in my own project?

Its repository states no licence, so its author keeps all rights: ask AnaviTechnology before reusing the design.