Skip to the content
2 layers74.9 × 40.6 mmAnavi gas detector, the printed circuit board in 3D

WiFi development board for MQ gas sensors

Size
74.9 × 40.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
31
Nets
27
Pads
104
Tracks, vias
177, 15
Pours
4
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
7 Apr 2019
Updated
4 Sep 2019

Overview

Anavi gas detector is an open-source printed circuit board by AnaviTechnology, from the AnaviTechnology/anavi-gas-detector repository on GitHub. It is a 2-layer board of 74.9 × 40.6 mm with 31 parts on 27 nets, routed with 177 tracks and 15 vias.

It is built around the ESP-12E, KP-3216EC and KP-3216SGC, with the KP-3216YC and LD1117S33TR(MS) among its other parts. Its parts include 9 resistors, 4 diodes, 3 ICs, 2 capacitors and 1 connector. It belongs with the radio and wireless and microcontroller boards boards and the ESP8266 boards of this library.

Main components

5

README

README.md

ANAVI Gas Detector

ANAVI Gas Detector is an open source hardware development board that acts like a WiFi smart gas detector. It features:

  • ESP8266 WiFi microcontroller
  • DHT22 sensor for temperature and humidity
  • Terminal for waterproof DS18B20 1-Wire temperature sensor
  • Dedicated slot for I2C OLED display
  • Slots for up to 3 plug and play I2C sensors for temperature, barometric pressure, humidity and light
  • UART (Universal asynchronous receiver/transmitter) pins for debugging

Open source software for ANAVI Gas Detector written as an Arduino sketch is also available at GitHub](https://github.com/AnaviTechnology/anavi-gas-detector-sw).

License

The project is released under the Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0).

Note: This is a human-readable summary of (and not a substitute for) the license.

You are free to:

Share — copy and redistribute the material in any medium or format Adapt — remix, transform, and build upon the material for any purpose, even commercially. The licensor cannot revoke these freedoms as long as you follow the license terms. Under the following terms:

Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use. ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original. No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits. Notices:

You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation. No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.

You will have to provide a link to the original creator of the project http://www.anavi.technology on any documentation or website.

Credit can be attributed through a link to the creator website: http://www.anavi.technology

Parts

31
QtyValueFootprintReferences
368RResistor_SMD:R_0603_1608MetricR5, R6, R7
3Conn_01x04Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalDISPLAY, GPIO, MQ
3I2C_SENS_1Pin_Headers:Pin_Header_Straight_1x04U1, U2, U3
210uFCapacitor_SMD:C_0805_2012MetricC1, C2
24,7KResistors_SMD:R_0603_HandSolderingR2, R3
1220KResistor_SMD:R_0603_1608MetricR8
12KResistor_SMD:R_0603_1608MetricR4
156KResistor_SMD:R_0603_1608MetricR9
168RResistors_SMD:R_0603_HandSolderingR1
1CONN_01X03Pin_Headers:Pin_Header_Straight_1x03P1
1ESP-12EESP-12E_SMDESP-12
1KP-3216ECLED_SMD:LED_1206_3216MetricD4
1KP-3216SGCLED_SMD:LED_1206_3216MetricD2
1KP-3216YCLED_SMD:LED_1206_3216MetricD3
1LD1117S33TRPackage_TO_SOT_SMD:SOT-223V1
1LEDLEDs:LED_1206D1
1LOGOlogo:anavi-logoG***
1SW_DIP_x01Buttons_Switches_ThroughHole:SW_PUSH_6mm_h4.3mmRESET
1USB_B_MicroConnector_USB:USB_Micro-B_Molex-105017-0001PWR IN

The 27 most common of 31 parts.

Similar boards

  • 2 layers65 × 30 mmGardening pHAT, the printed circuit board in 3D

    Gardening pHAT

    AnaviTechnology/anavi-gardening

    ANAVI Gardening uHAT is an open source hardware add-on board for Raspberry Pi that helps you develop smart solutions for monitoring and growing plants.

    27 parts11
  • 2 layers65 × 30 mmInfo pHAT, the printed circuit board in 3D

    Info pHAT

    AnaviTechnology/anavi-info-uhat

    Raspberry Pi HAT for attaching a mini I2C OLED display and other I2C peripherals.

    26 parts1
  • 2 layers65.3 × 32.8 mmAnavi miracle emitter, the printed circuit board in 3D

    Anavi miracle emitter

    AnaviTechnology/anavi-miracle-emitter

    USB-C WS2812B WiFi controller

    19 parts4
  • 2 layers57.7 × 47.2 mmAnavi gardening controller, the printed circuit board in 3D

    Anavi gardening controller

    AnaviTechnology/anavi-gardening-controller

    Open source hardware IoT gardening controller with XIAO ESP32C3, soil moisture sensors, I2C sensors and mini OLED display

    20 parts
  • 2 layers94 × 94 mmUsb2most, the printed circuit board in 3D

    Usb2most

    smartgauges/usb2most

    USB to MOST adapter

    124 parts26GPL-3.0
  • 2 layers74.9 × 40.6 mmAnavi fume extractor, the printed circuit board in 3D

    Anavi fume extractor

    AnaviTechnology/anavi-fume-extractor

    Open source WiFi development board for a portable fume extractor with 5V USB-powered fan for absorbing smoke.

    34 parts17
  • 2 layers74.9 × 40.6 mmAnavi thermometer, the printed circuit board in 3D

    Anavi thermometer

    AnaviTechnology/anavi-thermometer

    WiFi Smart Thermometer with ESP8266, DHT22, DS18B20, OLED display and slots for up to 3 I2C sensor modules

    25 parts17
  • 2 layers42 × 45 mmTemp hum monitor, the printed circuit board in 3D

    Temp hum monitor

    magkopian/esp-arduino-temp-monitor

    ESP8266 based temperature and humidity monitor.

    14 parts3

Questions

How big is the Anavi gas detector PCB?

It measures 74.9 × 40.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Anavi gas detector use?

31 parts, built around the ESP-12E, KP-3216EC, KP-3216SGC and KP-3216YC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Anavi gas detector KiCad files?

From the AnaviTechnology/anavi-gas-detector repository on GitHub, at the commit this page was made from: the board is anavi-gas-detector.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Anavi gas detector design in my own project?

Its repository states no licence, so its author keeps all rights: ask AnaviTechnology before reusing the design.