

Altair Remote Emergency Stop V1
Altair_Remote_Emergency_Stop_V1
- Size
- 99.1 × 50.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 37
- Nets
- 26
- Pads
- 142
- Tracks, vias
- 249, 179
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 31 Aug 2024
- Updated
- 31 Aug 2024
Overview
Altair Remote Emergency Stop V1 is an open-source printed circuit board by Altairu, from the Altairu/Altair_Remote_Emergency_Stop_V1 repository on GitHub. It is a 2-layer board of 99.1 × 50.2 mm with 37 parts on 26 nets, routed with 249 tracks and 179 vias.
It is built around the L7812 and TLP152. Its parts include 9 capacitors, 7 resistors, 5 ICs, 5 diodes and 5 connectors. It belongs with the ESP32 boards of this library.
Main components
2README
README.mdAltair_Remote_Emergency_Stop_V1
Altair_Remote_Emergency_Stop_V1
Parts
37| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C1, C3, C5, C6, C7 |
| 3 | D | Diode_SMD:D_SOD-128 | D3, D4, D5 |
| 3 | LOGO | LOGO | G***, G***, G*** |
| 2 | 10K | Resistor_SMD:R_0603_1608Metric | R2, R3 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R4, R7 |
| 2 | 330u | Capacitor_SMD:CP_Elec_10x10 | C8, C9 |
| 2 | 47u | Capacitor_SMD:C_0603_1608Metric | C2, C4 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D1, D2 |
| 2 | XT30 | Connector_AMASS:AMASS_XT30PW-F_1x02_P2.50mm_Horizontal | J4, J5 |
| 1 | 10 | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 100 | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 550 | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | BOOT | Button_Switch_THT:SW_PUSH-12mm | SW2 |
| 1 | L7812 | Package_TO_SOT_SMD:TO-252-2 | U3 |
| 1 | LP2950-3.3_TO252 | Package_TO_SOT_SMD:TO-252-2 | U2 |
| 1 | Q_NMOS_GDS | Package_TO_SOT_SMD:TO-263-2 | Q1 |
| 1 | RESET | Button_Switch_THT:SW_PUSH-12mm | SW1 |
| 1 | TLP152 | Package_SO:MFSOP6-5_4.4x3.6mm_P1.27mm | U4 |
| 1 | USB_B | Connector_USB:USB_B_Lumberg_2411_02_Horizontal | J1 |
| 1 | XT60 | Connector_AMASS:AMASS_XT60PW-F_1x02_P7.20mm_Horizontal | J2 |
| 1 | XT60 | Connector_AMASS:AMASS_XT60PW-M_1x02_P7.20mm_Horizontal | J3 |
| 1 | esp32 c3 | RF_Module:ESP32-C3-WROOM-02U | U1 |
| 1 | ヒューズ | TestPoint:XS-506A | U5 |
Similar boards
- 2 layers100 × 60 mm

- 2 layers100 × 20 mm

- 2 layers263.3 × 128 mm

KIKAD
MUBARIS-KT/DC-DC_CONVERTER
This project provides the complete design and code for a DC to DC converter that steps up 12V DC to 300V DC. The project is a comprehensive solution in power electronics, including PCB design, STM32 code for PWM…
133 parts - 4 layers100 × 68.4 mm

- 2 layers99.9 × 49.8 mm

- 2 layers120 × 130 mm

- 2 layers95 × 80 mm

- 2 layers100 × 54.6 mm

Questions
How big is the Altair Remote Emergency Stop V1 PCB?
It measures 99.1 × 50.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Altair Remote Emergency Stop V1 use?
37 parts, built around the L7812 and TLP152. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Altair Remote Emergency Stop V1 KiCad files?
From the Altairu/Altair_Remote_Emergency_Stop_V1 repository on GitHub, at the commit this page was made from: the board is Altair_Remote_Emergency_Stop_V1/Altair_Remote_Emergency_Stop_V1.kicad_pcb and its schematic Altair_Remote_Emergency_Stop_V1/Altair_Remote_Emergency_Stop_V1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Altair Remote Emergency Stop V1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Altairu before reusing the design.