

USB Relay Module
- Size
- 50 × 17 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 16
- Nets
- 14
- Pads
- 48
- Tracks, vias
- 77, 8
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 1 Dec 2019
- Updated
- 17 Jul 2026
Overview
USB Relay Module is an open-source printed circuit board by AlexUg, from the AlexUg/kicad-libs repository on GitHub. It is a 2-layer board of 50 × 17 mm with 16 parts on 14 nets, routed with 77 tracks and 8 vias.
It is built around the ATTINY45-20SU. Its parts include 5 resistors, 4 diodes, 3 capacitors, 2 connectors and 1 IC. It belongs with the home automation and IoT boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
1Parts
16| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100n | Capacitor_SMD:C_0603_1608Metric | C2, C3 |
| 2 | 3.6V | Diode_SMD:D_MiniMELF | D1, D2 |
| 2 | 82 | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | 880 | Resistor_SMD:R_0603_1608Metric | R3, R5 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 47uF | Capacitor_Tantalum_SMD:CP_EIA-3528-12_Kemet-T | C1 |
| 1 | ATtiny45-20SU | Package_SO:SOIJ-8_5.3x5.3mm_P1.27mm | U1 |
| 1 | D | Diode_SMD:D_SMB | D4 |
| 1 | HLS8 | Relay_THT_U:HLS8 | K1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | OUT | Connector_KF:KF301_5.0_3 | J2 |
| 1 | USB_A | Connector_USB:USB_A_CNCTech_1001-011-01101_Horizontal | J1 |
More from AlexUg/kicad-libs
3- 2 layers55 × 75 mm

- 2 layers27 × 27.5 mm

- 2 layers22 × 38 mm

Similar boards
- 2 layers100 × 100 mm

Mist1010
UzixLS/mist1010-board
10x10cm PCB variant of MIST FPGA project for G738/G706 enclosure
273 parts43MIT - 2 layers31 × 30.5 mm

Christmas tree barrier
Petezah/roomba_wall_v2
An AVR program for ATTiny85 to transmit a virtual wall signal for an iRobot Roomba
17 parts32GPL-3.0 - 4 layers158.8 × 104.1 mm

- 2 layers35.6 × 30.5 mm

- 2 layers

- 2 layers

Cbs badge
cbs-ntcore/cbs_badge
This badge is designed to highlight digital fabrication techniques that are commonly used in the Neurotechnology Core(NTCore) at the Center for Brain Science at Harvard University.
13 parts5 - 2 layers65 × 56.5 mm

PiSupply
enwi/PiSupply
Uninterruptable power supply for Raspberry Pi's, which can also power external HDDs
80 parts4LGPL-3.0 - 2 layers40.6 × 20.3 mm

Bike motor shim
mar0x/bike_motor_shim
Shimano e-bike shim between wheel sensor and motor to "extend the limits"
21 parts4
Questions
How big is the USB Relay Module PCB?
It measures 50 × 17 mm and has 2 copper layers, 1.6 mm thick.
What parts does the USB Relay Module use?
16 parts, built around the ATTINY45-20SU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the USB Relay Module KiCad files?
From the AlexUg/kicad-libs repository on GitHub, at the commit this page was made from: the board is USB_Relay_Module/USB_Relay_Module.kicad_pcb and its schematic STM32_WeAct_v3.0/WeAct.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the USB Relay Module design in my own project?
Its repository states no licence, so its author keeps all rights: ask AlexUg before reusing the design.