
Esp32
gdoor-org/gdoor
Wifi adapter and bus protocol documentation for the Gira TKS Door System

0027 Rain Detection Module LM393 is an open-source printed circuit board by AirchipTeknoloji, from the AirchipTeknoloji/0027_Rain_Detection_Module_LM393 repository on GitHub. It is a 2-layer board of 40 × 68 mm with 15 parts on 24 nets, routed with 52 tracks and 4 vias.
It is built around the LM393D. Its parts include 3 resistors, 2 capacitors, 2 ICs, 2 diodes and 2 connectors.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric | R1, R3 |
| 2 | LED | LED_SMD:LED_0805_2012Metric | D1, D2 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 10k | meminle:3362P_1 | T1 |
| 1 | LM393D | LM393:SOIC127P599X175-8N | U2 |
| 1 | LOGO | meminle:air c_ | G*** |
| 1 | LOGO | meminle:rain_2_ | G*** |
| 1 | LOGO | meminle:rain | G*** |
| 1 | Screw_Terminal_01x02 | Library:rain | J2 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_4Ucon:TerminalBlock_4Ucon_1x02_P3.50mm_Horizontal | J1 |
| 1 | ~ | air_module:air_module | U3 |

gdoor-org/gdoor
Wifi adapter and bus protocol documentation for the Gira TKS Door System

Laurenx618/ENGR3430-Eclectronics-FinalProject
This project is for the Eclectronics Final.

JakobThiessen/SmartHome_EMS-BUS-WI-FI-GATEWAY
ESP32-EMS WiFi gateway for read and control EMS and Heatronic compatible devices such as boilers, thermostats, solar modules and heat pumps.

reljamar/singlePhaseInverter
A precursor project to a future three-phase inverter for driving synchronous motors


edantoni96/NomobotSK
NomobotSK is a educational robot for kids to learn programming and robotics.


It measures 40 × 68 mm and has 2 copper layers, 1.6 mm thick.
15 parts, built around the LM393D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the AirchipTeknoloji/0027_Rain_Detection_Module_LM393 repository on GitHub, at the commit this page was made from: the board is 0027_Rain_Detection_Module_LM393.kicad_pcb and its schematic 0027_Rain_Detection_Module_LM393.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask AirchipTeknoloji before reusing the design.