Skip to the content
2 layers40 × 30 mm0023 Gas Module MQ-5, the printed circuit board in 3D
Size
40 × 30 mm
Copper layers
2
Thickness
1.6 mm
Parts
12
Nets
25
Pads
51
Tracks, vias
49, 3
Pours
2
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
25 Jul 2023
Updated
22 Jul 2024

Overview

0023 Gas Module MQ-5 is an open-source printed circuit board by AirchipTeknoloji, from the AirchipTeknoloji/0023_Gas_Module_MQ-5 repository on GitHub. It is a 2-layer board of 40 × 30 mm with 12 parts on 25 nets, routed with 49 tracks and 3 vias.

It is built around the MQ-5 and LM393D. Its parts include 4 resistors, 3 ICs, 2 capacitors and 2 diodes.

Main components

2

README

README.md

0023_Gas_Module_MQ-5

Parts

12
QtyValueFootprintReferences
20.1uFCapacitor_SMD:C_0805_2012MetricC1, C2
21kResistor_SMD:R_0805_2012MetricR1, R3
2LEDLED_SMD:LED_0805_2012MetricD1, D2
110kmemin:3362P_1T1
147kResistor_SMD:R_0805_2012MetricR2
15.1kResistor_SMD:R_0805_2012MetricR4
1LM393DLM393:SOIC127P599X175-8NU1
1MQ-5Sensor:MQ-6U2
1~Moduler_:pin_headerU3

Similar boards

  • 2 layers73.3 × 68.3 mmSensor, the printed circuit board in 3D

    Sensor

    MatheusPinto/PI_IFSC_2023_02

    Projetos da disciplina de Projeto Integrador II do IFSC - Florianópolis

    34 parts
  • 4 layers32.8 × 36.3 mmEsp32, the printed circuit board in 3D

    Esp32

    gdoor-org/gdoor

    Wifi adapter and bus protocol documentation for the Gira TKS Door System

    68 parts57GPL-3.0
  • 2 layers65.4 × 29 mmFinal project no connector, the printed circuit board in 3D

    Final project no connector

    Laurenx618/ENGR3430-Eclectronics-FinalProject

    This project is for the Eclectronics Final.

    69 parts2
  • 2 layers74.9 × 59.7 mmEMS BUS, the printed circuit board in 3D

    EMS BUS

    JakobThiessen/SmartHome_EMS-BUS-WI-FI-GATEWAY

    ESP32-EMS WiFi gateway for read and control EMS and Heatronic compatible devices such as boilers, thermostats, solar modules and heat pumps.

    51 parts1
  • 4 layers190 × 91 mmInv v1, the printed circuit board in 3D

    Inv v1

    reljamar/singlePhaseInverter

    A precursor project to a future three-phase inverter for driving synchronous motors

    160 parts1MIT
  • 2 layers105.7 × 107.5 mmNomobotSK, the printed circuit board in 3D

    NomobotSK

    edantoni96/NomobotSK

    NomobotSK is a educational robot for kids to learn programming and robotics.

    74 parts
  • 2 layers160 × 100 mmDC Electronic Load, the printed circuit board in 3D

    DC Electronic Load

    Jajaho/DC-Electronic-Load

    Digitally controlled dc electronic load.

    88 parts

Questions

How big is the 0023 Gas Module MQ-5 PCB?

It measures 40 × 30 mm and has 2 copper layers, 1.6 mm thick.

What parts does the 0023 Gas Module MQ-5 use?

12 parts, built around the MQ-5 and LM393D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the 0023 Gas Module MQ-5 KiCad files?

From the AirchipTeknoloji/0023_Gas_Module_MQ-5 repository on GitHub, at the commit this page was made from: the board is 0023_Gas_Module_MQ-5.kicad_pcb and its schematic 0023_Gas_Module_MQ-5.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the 0023 Gas Module MQ-5 design in my own project?

Its repository states no licence, so its author keeps all rights: ask AirchipTeknoloji before reusing the design.