

Cowloc adsb i
An ADS-B receiver module
- Size
- 49 × 30.5 mm
- Copper layers
- 4
- Thickness
- 1.59 mm
- Parts
- 83
- Nets
- 50
- Pads
- 247
- Tracks, vias
- 655, 200
- Pours
- 14
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 17 Jul 2024
- Updated
- 26 Aug 2024
Overview
Cowloc adsb i is an open-source printed circuit board by Agilack, from the Agilack/cowloc-adsb-i repository on GitHub. It is a 4-layer board of 49 × 30.5 mm with 83 parts on 50 nets, routed with 655 tracks and 200 vias.
It is built around the SN74LVC1G17DBV, NSVG3117SG6 and TLV9062ID, with the SN74LVC1G02DCK, SN74LVC1G14DBV and SN74LVC1G08DBV among its other parts. Its parts include 19 capacitors, 17 ICs, 16 resistors, 9 connectors and 4 inductors.
Main components
8SN74LVC1G17DBV
SOT-23-5-40℃~+125℃ 1 1 1.65V~5.5V 10uA 32mA 32mA 4.6ns@3.3V,15pF 74LVC Power-off isolation、Level shifting Push-pull Schmitt trigger Unidirectional SOT-23-5 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffer/Driver/TransceiverNSVG3117SG6
SC-88FL-40℃~+125℃ 100MHz~3GHz 11.2dB 16.3dB 22.7mA 3.9dB 35.5dB 4.5V~5.5V 9.8dBm SC-88FL RF Amplifiers ROHSonsemiRF AmplifiersTLV9062ID
SOIC-8-40℃~+125℃ 0.05pA 0.5pA 1.6mV 1.8V~5.5V 103dB 10MHz 10nV/√Hz@1kHz 2 50mA 530nV/℃ 538uA 6.5V/us Enable/shutdown function、ESD protection、EMI filtering/RF suppression Rail-to-Rail Input, Rail-to-Rail Output SOIC-8 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierSN74LVC1G02DCK
SC-70-5-40℃~+125℃ 1 1.2V、1.9V、2.4V、3.8V 1.65V~5.5V 1.7V~2V 10uA 2 3.6ns@3.3V,15pF 300mV、400mV、450mV、550mV 32mA 32mA 700mV~800mV 74LVC Series NOR Gate Overvoltage-tolerant input、Rear drive protection、Level shifting、Local shutdown mode、Live insertion protection SC-70-5 Logic Gates ROHSTexas InstrumentsLogic GatesSN74LVC1G14DBV
SOT-23-5-40℃~+85℃ 1 1 1.16V~3.33V 1.65V~5.5V 10uA 2.3V 32mA 32mA 390mV~1.87V 550mV 6.5ns@2.5V,50pF 74LVC Schmitt trigger 电源关断保护、噪声抑制功能 SOT-23-5 Inverters ROHSTexas InstrumentsInvertersSN74LVC1G08DBV
SOT-23-5-40℃~+125℃ 1 1.2V、1.9V、2.3V、3.8V 1.65V~5.5V 1.7V、2V 10uA 2 300mV、450mV、550mV 32mA 32mA 4ns@5V,50pF 700mV、800mV 74LVC Series AND Gate Overvoltage-tolerant input、Rear drive protection、Level shifting、Local shutdown mode、Live insertion protection SOT-23-5 Logic Gates ROHSTexas InstrumentsLogic GatesTA0232A
SMD3838-8PSAW FiltersTSTTA0970A
SMD3838-6P-40℃~+85℃ 1.09GHz 2.3dB、3dB 50Ω SMD3838-6P SAW Filters ROHSTSTSAW Filters
README
Readme.mdCowloc - ADS-B Receiver
Parts
83| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | R | cowloc-adsb-i:SMD0603 | R7, R8, R9, R10, R11, R12, R13, R14, R15, R16 |
| 7 | CONN_1 | cowloc-adsb-i:TP_SMD | TP1, TP2, TP3, TP4, TP5, TP6, TP7 |
| 5 | 100nF | cowloc-adsb-i:SMD0603 | C9, C12, C13, C14, C15 |
| 5 | C | cowloc-adsb-i:SMD0603 | C10, C16, C17, C18, C19 |
| 5 | SN74LVC1G02 | cowloc-adsb-i:SOT23-5 | U10, U17, U19, U20, U21 |
| 5 | SN74LVC1G14 | cowloc-adsb-i:SOT23-5 | U7, U11, U12, U14, U18 |
| 5 | ~ | cowloc-adsb-i:CONN_UFL-R-SMT-1 | J1, J2, J3, J4, J5 |
| 4 | 10nF | cowloc-adsb-i:SMD0603 | C4, C7, C8, C11 |
| 4 | CONN_1 | cowloc-adsb-i:TP_PIN | P1, P2, P3, P4 |
| 4 | SN74LVC1G08 | cowloc-adsb-i:SOT23-5 | locked, U8, U15, U16 |
| 4 | n/e | cowloc-adsb-i:SMD0603 | R1, R2, R5, R6 |
| 3 | FB100 | cowloc-adsb-i:SMD0603 | L2, L3, L4 |
| 2 | 10pF | cowloc-adsb-i:SMD0603 | C5, C6 |
| 2 | 39pF | cowloc-adsb-i:SMD0603 | C1, C2 |
| 2 | D | cowloc-adsb-i:SOD-123 | D2, D3 |
| 2 | SN74LVC1G17 | cowloc-adsb-i:SOT23-5 | U6, U13 |
| 1 | 100pF | cowloc-adsb-i:SMD0603 | C3 |
| 1 | 4,7k | cowloc-adsb-i:SMD0603 | R4 |
| 1 | 49.9 | cowloc-adsb-i:SMD0603 | R3 |
| 1 | 68nH | cowloc-adsb-i:SMD0805 | L1 |
| 1 | AD8313 | cowloc-adsb-i:MSOP-8 | U2 |
| 1 | AD993x | cowloc-adsb-i:MSOP-8 | U3 |
| 1 | ANTENNA | cowloc-adsb-i:CONN_SMA_RA | A1 |
| 1 | D_ESD | cowloc-adsb-i:SOD-123 | D1 |
| 1 | HT8051 | cowloc-adsb-i:SOT23-5 | U4 |
| 1 | NSVG3117 | cowloc-adsb-i:SC88 | U1 |
| 1 | SWITCH_SLIDE | cowloc-adsb-i:SW_450301014042 | SW1 |
| 1 | TA0232A | cowloc-adsb-i:FLT_3x8 | F2 |
| 1 | TA0970A | cowloc-adsb-i:FLT_6 | F1 |
| 1 | TLV9062 | cowloc-adsb-i:SOIC-8 | U5 |
Similar boards
- 2 layers70 × 70 mm

- 2 layers76.2 × 67.3 mm

- 6 layers100 × 62 mm

- 4 layers46 × 80 mm

RFly One
YeetTheAnson/RFly-One
Offline general aviation proximity awareness system with support for ADS-B, FLARM AIR V7, OGNTP and FANET+
188 parts - 2 layers30 × 37 mm

Metronome
Bindless-Chicken/Metronome
:musical_keyboard: Tiny logic only metronome for when you are on the move
34 parts2MIT - 4 layers100 × 100 mm

Deneme2
Gokasimov/STM32-FOC-Control
A completely from-scratch, bare-metal implementation of Field-Oriented Control (FOC) tailored for ultra-low inductance (3 µH) drone motors (e.g., A2212).
118 parts2MIT - 2 layers73.8 × 63.9 mm

- 2 layers72 × 133 mm

Questions
How big is the Cowloc adsb i PCB?
It measures 49 × 30.5 mm and has 4 copper layers, 1.59 mm thick.
What parts does the Cowloc adsb i use?
83 parts, built around the SN74LVC1G17DBV, NSVG3117SG6, TLV9062ID and SN74LVC1G02DCK. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Cowloc adsb i KiCad files?
From the Agilack/cowloc-adsb-i repository on GitHub, at the commit this page was made from: the board is hardware/prj-kicad/cowloc-adsb-i.kicad_pcb and its schematic hardware/prj-kicad/cowloc-adsb-i.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Cowloc adsb i design in my own project?
Its repository states no licence, so its author keeps all rights: ask Agilack before reusing the design.