2 layers96.8 × 97 mm
Psoc5power
profdc9/DRSSTC-PCB-Pack
A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.
133 parts59
2 layers45.5 × 28 mm
Sch espcam hc501 irLed
Achicken7301/farm-security1- Size
- 45.5 × 28 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 9
- Nets
- 11
- Pads
- 30
- Tracks, vias
- 42, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 1 Feb 2024
- Updated
- 3 Apr 2024
Overview
Sch espcam hc501 irLed is an open-source printed circuit board by Achicken7301, from the Achicken7301/farm-security repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 45.5 × 28 mm with 9 parts on 11 nets, routed with 42 tracks and 0 vias.
It is built around the IRF540N. Its parts include 4 resistors, 4 connectors and 1 transistor.
Main components
1Parts
9| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R5 |
| 1 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 5.6 | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P15.24mm_Horizontal | R4 |
| 1 | Conn_01x08_Socket | Connector_Molex:Molex_Nano-Fit_105313-xx08_1x08_P2.50mm_Horizontal | J1 |
| 1 | HC501 | Connector_Molex:Molex_Nano-Fit_105313-xx03_1x03_P2.50mm_Horizontal | J3 |
| 1 | IRF540N | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
| 1 | IR_LED_850nm | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type055_RT01502HDWU_1x02_P5.00mm_Horizontal | J5 |
| 1 | POWER | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type055_RT01502HDWU_1x02_P5.00mm_Horizontal | J6 |
Similar boards
- 2 layers124.5 × 77.5 mm
- 2 layers55 × 90.8 mm
- 2 layers73.7 × 61 mm
- 2 layers
- 4 layers147.8 × 77 mm
2xBLDCPicoV3
AmericanRework/Pico-2x-BLDC
One RP2040 Pico drives two brushless motors! SimpleFOC + Halls + 2304 drivers + TO-220 mosfets or IGBTs. Plugs directly into 450x automower motors.
135 parts7 - 2 layers
PCB Layout
chgopireddy/Full-Bridge-Class-D-Audio-Amplifier
LTspice Model for Full Bridge Class D, Voltage Mode Control, Peak Current Mode Control
63 parts6 - 2 layers147.2 × 58.3 mm
Li IonBatteryProtection
cnobile2012/Li-IonBatteryProtection
Circuit to protect Li-Ion and Li-Po batteries at the cell level.
81 parts6MIT
Questions
How big is the Sch espcam hc501 irLed PCB?
It measures 45.5 × 28 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Sch espcam hc501 irLed use?
9 parts, built around the IRF540N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sch espcam hc501 irLed KiCad files?
From the Achicken7301/farm-security repository on GitHub, at the commit this page was made from: the board is Assembly/sch_espcam_hc501_irLed.kicad_pcb and its schematic Assembly/led_hc501/led_hc501.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sch espcam hc501 irLed design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).