2 layers134 × 88 mm
Tulipcc
shorepine/tulipcc
The Tulip Creative Computer and AMYboard - portable Python synthesizers
103 parts978
2 layers54 × 85.6 mm
IFTENDO
Acathla-fr/IFTENDOKeyboard: GPIO20 (RX) -> Output 1 GPIO10 -> Output 2 GPIO0 -> Output 3 GPIO7 -> Input 1 GPIO8 -> Input 2 GPIO9 -> Input 3
- Size
- 54 × 85.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 24
- Nets
- 26
- Pads
- 92
- Tracks, vias
- 162, 4
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 7 Nov 2023
- Updated
- 6 Jun 2024
Overview
IFTENDO is an open-source printed circuit board by Acathla-fr, from the Acathla-fr/IFTENDO repository on GitHub. It is a 2-layer board of 54 × 85.6 mm with 24 parts on 26 nets, routed with 162 tracks and 4 vias.
It is built around the 1N4148WS and PTS526 SMG15J SMTR2 LFS. Its parts include 9 diodes, 8 switches, 3 connectors and 1 resistor.
Main components
2
1N4148WS
SOD-3231.25V@150mA 100V 150mA 1uA@75V 200mW 2A 4ns Independent SOD-323 Switching Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Switching DiodesPTS526 SMG15J SMTR2 LFS
--20℃~+70℃ 1.6N 12V 50mA IP40 J-Lead Round Button SPST-NO Surface Mount,Vertical - Tactile Switches ROHSC&KTactile Switches
README
README.mdIFTENDO
Extention to the IFT-C3 board with OLED screen (128x64), I2C address : 0x3C, and buttons
SDA: GPIO5
SCL: GPIO6
Keyboard:
GPIO20 (RX) -> Output 1
GPIO10 -> Output 2
GPIO0 -> Output 3
GPIO7 -> Input 1
GPIO8 -> Input 2
GPIO9 -> Input 3
Up : O_1, I_1
Left : O_1, I_2
Down : O_1, I_3
Right : O_2, I_1
Select : O_2, I_2
Start : O_2, I_3
A : O_3, I_1
B : O_3, I_2
Parts
24| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 1N4148WS | Diode_SMD:D_SOD-323_HandSoldering | D1, D2, D3, D4, D5, D6, D7, D8 |
| 8 | PTS526_SMG15J_SMTR2_LFS | Local footprints:PTS526SMG15JSMTR2LFS | S1, S2, S3, S4, S5, S6, S7, S8 |
| 2 | Conn_01x10_Pin | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Horizontal | J1, J2 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | Conn_01x04_Socket | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J3 |
| 1 | LED | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D9 |
| 1 | LOGO | Local footprints:Logo_IFT_50mm_silk | G*** |
| 1 | LOGO | Local footprints:logo_IFT_12mm | G*** |
| 1 | LOGO | Local footprints:Logo_texte_DVIC_kicad_mask_12mm | G*** |
Similar boards
- 8 layers100.2 × 55 mm
Jetson nano baseboard
antmicro/jetson-nano-baseboard
Antmicro's open hardware baseboard for the NVIDIA Jetson Nano, TX2 NX and Xavier NX
391 parts548Apache-2.0 - 4 layers94.4 × 72.8 mm
RP2040 base
Twisted-Fields/rp2040-motor-controller
A dual channel brushless motor controller based on the RP2040 microcontroller, designed in Kicad.
325 parts419 - 2 layers135.9 × 89.5 mm
Left
TeXitoi/keyseebee
KeySeeBee is a split ergo keyboard. It is only 2 PCB (so the name) with (almost) only SMD components on it. It's only a keyboard, no LED, no display, nothing more than keys and USB.
61 parts348MIT - 4 layers70 × 54 mm
- 4 layers22.9 × 50.8 mm
Lg hvac esp32
JanM321/esphome-lg-controller
Wired controller for LG HVAC units using ESPHome and ESP32
20 parts2920BSD - 4 layers121.9 × 109.2 mm
Plinkyblack hwmidi jacks
plinkysynth/plinky_public
a public release of the plinky sw and hw
300 parts227 - 4 layers140 × 100 mm
Dc usv
TobleMiner/DC-UPS
A small DC UPS, designed to keep small appliances like consumer network equipment running during power outages
351 parts223CERN-OHL-P-2.0
Questions
How big is the IFTENDO PCB?
It measures 54 × 85.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the IFTENDO use?
24 parts, built around the 1N4148WS and PTS526 SMG15J SMTR2 LFS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the IFTENDO KiCad files?
From the Acathla-fr/IFTENDO repository on GitHub, at the commit this page was made from: the board is IFTENDO.kicad_pcb and its schematic IFTENDO.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the IFTENDO design in my own project?
Its repository states no licence, so its author keeps all rights: ask Acathla-fr before reusing the design.