Skip to the content
2 layers128.4 × 115.7 mmStarbie, the printed circuit board in 3D

PCB of a starbie, a starboy-like thing.

Size
128.4 × 115.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
13
Nets
28
Pads
115
Tracks, vias
141, 20
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
5 Oct 2026
Updated
21 Oct 2026

Overview

Starbie is an open-source printed circuit board by AaronA0604, from the AaronA0604/Starbie repository on GitHub, published under the MIT licence. It is a 2-layer board of 128.4 × 115.7 mm with 13 parts on 28 nets, routed with 141 tracks and 20 vias.

It is built around the DHT11 and ICS-43434. Its parts include 3 capacitors, 3 ICs, 2 connectors, 2 switches and 1 resistor. It belongs with the ESP32 and RISC-V boards of this library.

Main components

2

README

README.md

This is a starboy-like device. I shaped it like a duck, since I plan on expanding it to be used as a debugging tool where in addition to its starboy features, it can detect if someone is speaking to it and respond in simple prompting sentences.

Controls

ControlWhat it does
Button 1, first pressOpens the radial menu
Tilt while menu is openMoves the selector ball; each general direction corresponds to one large sector
Button 1, second pressChooses the highlighted action
Button 2Shows or hides the stats screen
Shake while viewing the petTriggers Starbie's shake reaction
Screenshot 2026-10-12 at 5 11 19 PM Screenshot 2026-10-21 at 5 42 44 PM

Parts

13
QtyValueFootprintReferences
20.1uFCapacitor_SMD:C_0402_1005MetricC1, C2
2SW_PushButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBSW1, SW2
110kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR1
110uFCapacitor_SMD:C_0805_2012MetricC3
1Conn_01x04_PinImported Parts:Display_128x64_096_I2CJ1
1Conn_01x08_PinConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ2
1DHT11Sensor:Aosong_DHT11_5.5x12.0_P2.54mmU2
1ICS-43434Sensor_Audio:InvenSense_ICS-43434-6_3.5x2.65mmMK1
1MAX98357APackage_DFN_QFN:TQFN-16-1EP_3x3mm_P0.5mm_EP1.23x1.23mmU3
1SpeakerPackage_DFN_QFN:TQFN-16-1EP_3x3mm_P0.5mm_EP1.23x1.23mmLS1
1XIAO-ESP32-C3-SMDImported Parts:XIAO-ESP32-C6-DIPU1

Similar boards

  • 2 layers196 × 104 mmHack fft, the printed circuit board in 3D

    Hack fft

    hack-apollo/hack_spectrum

    a music spectrum use esp32-pico-d4 and ws2812b.

    611 parts28GPL-3.0
  • 2 layersAI voice assistant, the printed circuit board in 3D

    AI voice assistant

    DhamuVkl/ESP32S3-AI-Voice-Assistant

    This project is a complete DIY AI voice assistant built around the ESP32-S3 microcontroller. It combines custom PCB design, advanced audio processing, and cloud-based AI to create a device that rivals commercial smart…

    78 parts26MIT
  • 4 layers52.5 × 59.7 mmESPHome Indoor Multi Sensor, the printed circuit board in 3D

    ESPHome Indoor Multi Sensor

    mikelawrence/esphome-indoor-multi-sensor-hardware

    ESPHome Indoor Multi-Sensor hardware. This design supports Radar/PIR Presence, Temperature, Humidity, Pressure, Light, CO2, CO, VOC, NOX and PM sensors.

    113 parts14CERN-OHL-P-2.0
  • 4 layers108.6 × 87.7 mmBlinky badge light, the printed circuit board in 3D

    Blinky badge light

    rowr111/blinky-badge-light

    lighting badge with unique patterns and sound reactivity

    123 parts9MIT
  • 4 layers66.8 × 150 mmCooee Big brains, the printed circuit board in 3D

    Cooee Big brains

    DetectiveMittens/Cooee

    An open-source phone that can operate without GSM or LTE coverage. Utilising LoRa modulation and mesh networking to enable long range "off-grid" communication

    200 parts3GPL-2.0
  • 2 layers9.9 × 7.9 mmIcs43434 breakout, the printed circuit board in 3D

    Ics43434 breakout

    expoman/tdk_ics-43434_breakout

    small breakout board for the TDK ICS-43434 microphone chip

    5 parts2GPL-3.0
  • 2 layers178.6 × 66 mmESP32S3comV3.2, the printed circuit board in 3D

    ESP32S3comV3.2

    leeyumsk/IRL-Subtitles

    Using techniques similar to human perception to localize sounds and speakers.

    69 parts2
  • 4 layers88.1 × 59.4 mmChromapi motherboard v1, the printed circuit board in 3D

    Chromapi motherboard v1

    Mowibox/chromapi_motherboard

    Raspberry Pi control HAT dedicated to the quadruped robot Chromapi.

    139 parts2Apache-2.0

Questions

How big is the Starbie PCB?

It measures 128.4 × 115.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Starbie use?

13 parts, built around the DHT11 and ICS-43434. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Starbie KiCad files?

From the AaronA0604/Starbie repository on GitHub, at the commit this page was made from: the board is Starbie.kicad_pcb and its schematic Starbie.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Starbie design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).