

Mixtape Barebone Backup
- Size
- 35.5 × 23.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 41
- Nets
- 17
- Pads
- 103
- Tracks, vias
- 142, 3
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 28 Jul 2018
- Updated
- 1 Aug 2018
Overview
Mixtape Barebone Backup is an open-source printed circuit board by 8BitMixtape, from the 8BitMixtape/DIY-CAD_MixtapeFootprints repository on GitHub. It is a 2-layer board of 35.5 × 23.2 mm with 41 parts on 17 nets, routed with 142 tracks and 3 vias.
It is built around the ATTINY85-20PU. Its parts include 17 connectors, 7 resistors, 3 capacitors, 1 IC and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdDIY-CAD_MixtapeFootprints
Parts
41| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 22K | 8BitMixtape_DIY-CAD:R_1206_Mixtape | R1, R2, R3, R4 |
| 4 | GND | 8BitMixtape_DIY-CAD:GND_Loch_mixtape | J4, J4, J4, J4 |
| 3 | 100nF | 8BitMixtape_DIY-CAD:C_1210_MixtapeStyle | C1, C2, C3 |
| 2 | GND | 8BitMixtape_DIY-CAD:Loch_mixtape_seltsam | J4, J4 |
| 2 | JACK_TRS_6PINS | 8BitMixtape_DIY-CAD:AUDIO-JACK-3.5mm_SMD_noPrint | JACK1, JACK2 |
| 2 | JACK_TRS_6PINS | 8BitMixtape_DIY-CAD:AUDIO-Jack_3.5mm_5Pin | JACK1, JACK2 |
| 2 | SK6813b | 8BitMixtape_DIY-CAD:Mixtape_NEO_WS2812B | NEO1, NEO2 |
| 1 | 8BitMixtape_DIY-CAD:MicroMixtape_edge | ||
| 1 | 1K | 8BitMixtape_DIY-CAD:R_1206_Mixtape | R6 |
| 1 | 330 | 8BitMixtape_DIY-CAD:R_1206_Mixtape | R7 |
| 1 | 4K7 | 8BitMixtape_DIY-CAD:R_1206_Mixtape | R5 |
| 1 | ATTINY85-20PU | 8BitMixtape_DIY-CAD:Attiny_DIP-8_W7.62mm | IC1 |
| 1 | Battery | 8BitMixtape_DIY-CAD:Bat_connector+- | BAT1 |
| 1 | LED | 8BitMixtape_DIY-CAD:TOP_led_footprint | D1 |
| 1 | LED | 8BitMixtape_DIY-CAD:Loch_mixtape | J11 |
| 1 | PB0 | 8BitMixtape_DIY-CAD:Loch_mixtape_seltsam | J5 |
| 1 | PB2 | 8BitMixtape_DIY-CAD:Loch_mixtape_seltsam | J7 |
| 1 | PB3 | 8BitMixtape_DIY-CAD:Loch_mixtape_seltsam | J2 |
| 1 | PB4 | 8BitMixtape_DIY-CAD:Loch_mixtape | J3 |
| 1 | PB4 | 8BitMixtape_DIY-CAD:Loch_mixtape_seltsam | J3 |
| 1 | PB5 | 8BitMixtape_DIY-CAD:Loch_mixtape_seltsam | J1 |
| 1 | POT | 8BitMixtape_DIY-CAD:Mixtape_Pot_Alps | POT1 |
| 1 | POT | 8BitMixtape_DIY-CAD:Potentiometer_wheel | TRIM1 |
| 1 | Prog | 8BitMixtape_DIY-CAD:Loch_mixtape | J9 |
| 1 | S-Out | 8BitMixtape_DIY-CAD:Loch_mixtape | J10 |
| 1 | SW_Push | 8BitMixtape_DIY-CAD:TACTILE-PTH_6mm | PUSH1 |
| 1 | SW_SPST | 8BitMixtape_DIY-CAD:Push_SWITCH | SW1 |
| 1 | VCC | 8BitMixtape_DIY-CAD:Loch_mixtape_seltsam | J8 |
| 1 | VCC | 8BitMixtape_DIY-CAD:Loch_mixtape | J8 |
More from 8BitMixtape/DIY-CAD_MixtapeFootprints
1- 2 layers

Similar boards
- 2 layers22.2 × 46.4 mm

C64-Switchless Quad Kernal Switcher
bwack/C64-Switchless-Multi-Kernal-27C256-adapter
Kernal switcher for the C64/C64C/C128
14 parts112 - 2 layers30.7 × 76.1 mm

Repeater v2
plusvic/simplebus2-intercom
General description of the Simplebus2 protocol used by some Comelit's intercoms. Hardware for retransmitting Simplebus2 messages over UART.
17 parts95CC0-1.0 - 2 layers101.5 × 54 mm

Simkarte
osmocom/osmocom-analog
Software Implementation of analog cellular telephony systems like NMT, TACS, IMTS, A/B/C-Netz; mirror of https://gitea.osmocom.org/cellular-infrastructure/osmocom-analog
15 parts32GPL-3.0 - 2 layers76.2 × 50.8 mm

Jerboa-8
strickyak/jerboa-attiny85-mod-synth
Modular Synthesizer using an ATtiny85 chip for each module.
23 parts31MIT - 2 layers

- 2 layers55.9 × 55.9 mm

- 2 layers71.1 × 40.6 mm

Tiny blinky
Hack-a-Day/Remoticon_KiCad_Blender
support files for the 2020 Remoticon KiCad to Blender > PCB renders workshop
21 parts22 - 2 layers242 × 60 mm

Questions
How big is the Mixtape Barebone Backup PCB?
It measures 35.5 × 23.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Mixtape Barebone Backup use?
41 parts, built around the ATTINY85-20PU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mixtape Barebone Backup KiCad files?
From the 8BitMixtape/DIY-CAD_MixtapeFootprints repository on GitHub, at the commit this page was made from: the board is Kicad_MixtapeBarebone/Mixtape_Barebone_Backup.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mixtape Barebone Backup design in my own project?
Its repository states no licence, so its author keeps all rights: ask 8BitMixtape before reusing the design.