

ESP01 WLED
ESP01_wled_breakout
- Size
- 14 × 26 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 19
- Nets
- 11
- Pads
- 49
- Tracks, vias
- 61, 5
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 8 Mar 2025
- Updated
- 9 Mar 2025
Overview
ESP01 WLED is an open-source printed circuit board by 8-Lambda-8, from the 8-Lambda-8/ESP01_wled_breakout repository on GitHub. It is a 2-layer board of 14 × 26 mm with 19 parts on 11 nets, routed with 61 tracks and 5 vias.
It is built around the AMS1117-3.3. Its parts include 6 resistors, 3 ICs, 2 capacitors and 2 connectors. It belongs with the ESP8266 boards of this library.
Main components
1README
README.mdESP01_wled_breakout
ESP01_wled_breakout
Parts
19| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R3, R4 |
| 2 | 22uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6 |
| 1 | 120 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | ESP-01v090 | ESP8266:ESP-01 | U1 |
| 1 | PinSocket_2x04_P2.54mm_Vertical_SMD | Connector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_Vertical_SMD | U1_ |
| 1 | USB_C_Receptacle_PowerOnly_6P | Connector_USB:USB_C_Receptacle_GCT_USB4125-xx-x_6P_TopMnt_Horizontal | J3 |
| 1 | ~ | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Horizontal | J1 |
The 13 most common of 19 parts.
More from 8-Lambda-8/ESP01_wled_breakout
1- 2 layers94 × 96 mm

Similar boards
- 2 layers290.1 × 130 mm

- 2 layers26.2 × 45.5 mm

PL18 multiprotocol
pascallanger/DIY-Multiprotocol-TX-Module
Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.
24 parts1.9kGPL-3.0 - 4 layers99 × 53.3 mm

PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 4 layers85 × 56 mm

- 4 layers100 × 54 mm

32Bit shift register
MaltWhiskey/Mega-Cube
16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver
64 parts766 - 2 layers44.2 × 29.3 mm

- 2 layers78 × 60 mm

- 2 layers59.1 × 99.9 mm

Cheap FOCer 2 60mm
shamansystems/Cheap-FOCer-2
Low-Cost Motor Controller based on the VESC 6
193 parts407
Questions
How big is the ESP01 WLED PCB?
It measures 14 × 26 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ESP01 WLED use?
19 parts, built around the AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP01 WLED KiCad files?
From the 8-Lambda-8/ESP01_wled_breakout repository on GitHub, at the commit this page was made from: the board is ESP01_WLED.kicad_pcb and its schematic ESP01_WLED.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP01 WLED design in my own project?
Its repository states no licence, so its author keeps all rights: ask 8-Lambda-8 before reusing the design.