

Stm32g431cxux
The box pin header for SWD has the following pin layout.
- Size
- 17.8 × 31.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 50
- Pads
- 133
- Tracks, vias
- 506, 76
- Pours
- 179
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 8 Apr 2023
- Updated
- 7 Oct 2023
Overview
Stm32g431cxux is an open-source printed circuit board by 74th, from the 74th/stm32-promicro repository on GitHub. It is a 2-layer board of 17.8 × 31.8 mm with 22 parts on 50 nets, routed with 506 tracks and 76 vias.
It is built around the AMS1117-3.3. Its parts include 6 capacitors, 5 resistors, 4 connectors, 2 ICs and 1 diode. It belongs with the STM32 and AVR (ATmega, ATtiny) boards of this library.
Main components
1README
stm32g03xfxp/README.mdSTM32F03xfxp ProMicro




v1.3.0
- change SWD port to 10 Pin with UART like Arduino UNO R4 (but, vcc is 3.3V)
Documents
Debug Port
The box pin header for SWD has the following pin layout.
SWD のピンヘッダは以下のピン配置になっています。
Pinout

For other functions, please refer to the datasheet.
他の機能はデータシートを参照ください。
BOM
| Reference | Name | Quantity |
|---|---|---|
| C1 | Capacitor 0805 10uF | 1 |
| C2 | Capacitor 0805 2.2uF | 1 |
| C3, C4 | Capacitor 0805 100nF | 2 |
| D1 | LED 0805 Blue | 1 |
| J1 | USB Type-C Receptacle | 1 |
| J2 | Pin Header 2x5 Pitch 1.27mm (SWD) | 1 |
| R1, R2 | Register 0805 5.1kΩ | 2 |
| R3, R4 | Register 0805 10kΩ | 2 |
| SW1 | Button SKRPABE010 | 1 |
| U1 | Regulator 3.3V SOT-89 AMS1117 | 1 |
| U2 | MCU ST STM32G030F6Px | 1 |
v1.2.0
Documents
Debug Port
The box pin header for DAP Link has the following pin layout.
DAP Link 用のボックスピンヘッダは以下のピン配置になっています。
Pinout

For other functions, please refer to the datasheet.
他の機能はデータシートを参照ください。
BOM
| id | parts name | num |
|---|---|---|
| J1 | USB 2.0 Type-C Socket (Only Power) | 1 |
| R1,R2 | 0806 Register 5.1k | 2 |
| R4 | 0806 Register 0 | 1 |
| R3,R6 | 0806 Register 10k | 2 |
| C1 | 0806 Capacitor 10u | 1 |
| C2 | 0806 Capacitor 2.2u | 1 |
| C3,C4 | 0806 Capacitor 100n | 2 |
| U2 | TSSOP-20 MCU STM32G030F6Px | 1 |
| D1 | 0805 LED Blue | 1 |
| U1 | SOT-89 3.3V Regulator AMS1117-3.3 | 1 |
| SW1 | SKRPABE010 Push Switch | 1 |
| CH3 | Pitch 1.25mm 2x3 Box Pin Header DAPLink-SWD | 1 |
Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100n | $74th:Capacitor_0603_1608 | C3, C4, C5, C6 |
| 3 | 10k | $74th:Register_0603_1608 | R3, R4, R5 |
| 2 | 10u | $74th:Capacitor_0603_1608 | C1, C2 |
| 2 | 5.1k | $74th:Register_0603_1608 | R1, R2 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-89-3_Handsoldering | U1 |
| 1 | Blue | $74th:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | LOGO | $74th:74th-4mm | G*** |
| 1 | Polyfuse | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | ProMicro-LeftPin-NoGND | $74th:ProMicro_LIKE_LEFT_NO_GND | J3 |
| 1 | ProMicro-RightPin | $74th:ProMicro_LIKE_RIGHT | J4 |
| 1 | STM32G431CBUx | $74th:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U2 |
| 1 | SWD-MCU_Side-10Pin | $74th:SWD_2x05_P1.27mm | J2 |
| 1 | SW_Push | $74th:SKRPABE010 | SW1 |
| 1 | USB2.0_C_v3 | $74th:USB-C-12-Pin-SMD | J1 |
The 21 most common of 22 parts.
More from 74th/stm32-promicro
1- 2 layers17.8 × 33 mm

Similar boards
- 2 layers290.1 × 130 mm

- 2 layers26.2 × 45.5 mm

PL18 multiprotocol
pascallanger/DIY-Multiprotocol-TX-Module
Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.
24 parts1.9kGPL-3.0 - 4 layers99 × 53.3 mm

PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 4 layers85 × 56 mm

- 4 layers100 × 54 mm

32Bit shift register
MaltWhiskey/Mega-Cube
16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver
64 parts766 - 2 layers44.2 × 29.3 mm

- 2 layers78 × 60 mm

- 2 layers59.1 × 99.9 mm

Cheap FOCer 2 60mm
shamansystems/Cheap-FOCer-2
Low-Cost Motor Controller based on the VESC 6
193 parts407
Questions
How big is the Stm32g431cxux PCB?
It measures 17.8 × 31.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Stm32g431cxux use?
22 parts, built around the AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Stm32g431cxux KiCad files?
From the 74th/stm32-promicro repository on GitHub, at the commit this page was made from: the board is stm32g431cxux/stm32g431cxux.kicad_pcb and its schematic stm32g03xfxp/stm32g03xfxp.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Stm32g431cxux design in my own project?
Its repository states no licence, so its author keeps all rights: ask 74th before reusing the design.