

Ch32v203-daplink pcb
DAPLink PCB (CH32V203)
- Size
- 45.2 × 17.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 49
- Pads
- 141
- Tracks, vias
- 308, 66
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 19 Apr 2023
- Updated
- 16 Sep 2023
Overview
Ch32v203-daplink pcb is an open-source printed circuit board by 74th, from the 74th/ch32v203-daplink-pcb repository on GitHub, published under the MIT licence. It is a 2-layer board of 45.2 × 17.8 mm with 31 parts on 49 nets, routed with 308 tracks and 66 vias.
It is built around the AMS1117-3.3. Its parts include 9 capacitors, 7 resistors, 3 connectors, 2 ICs and 2 diodes. It belongs with the STM32 and RISC-V boards of this library.
Main components
1README
README.mdCH32V203 を利用した DAPLink




features
- SWD のデバッガとして使える
- USB シリアル変換として使える
- 1.27mm ピッチ 10 ピンの SWD と互換性のあるポートを持っている(ただし SWO はなし)
- Arduino UNO R4 の SWD + UART の 1.27mm ピッチ 10 ピンと互換性のあるポートを持っている
- 10 ピンコネクタの VCC を 5V、3.3V を切り替えることができる(Arduino UNO R4 では 5V が必要)
- USB-C
SWD 10pin Connector
Firmware
https://github.com/XIVN1987/DAPLink/tree/master/CH32V203
v1.1.0
R2、R3 は NC にすること。
BOM
| Reference | Name | Quantity |
|---|---|---|
| C1, C2 | Capacitor 0603 22pF | 2 |
| C3, C4, C7 | Capacitor 0603 10uF | 3 |
| C5 | Capacitor 0603 2.2uF | 1 |
| C6, C8, C9 | Capacitor 0603 100nF | 3 |
| D1 | LED 0805 Blue | 1 |
| D2 | LED 0805 Red | 1 |
| J1 | USB Type-C Receptacle | 1 |
| J2 | Box Pin Header 2x5 Pitch 1.27mm | 1 |
| J3 | Pin Header 2x5 Pitch 2.54mm | 1 |
| R1, R5 | Register 0603 10kΩ | 2 |
| R2, R3 | NC | 2 |
| R4, R6, R7 | Register 0603 5.1kΩ | 3 |
| SW1 | Slide Switch | 1 |
| U1 | MCU LQFP48 WCH CH32V203C8T6 | 1 |
| U2 | Regulator 3.3V SOT-223 AMS1117-3.3 | 1 |
| Y1 | Crystal 3225 8MHz | 1 |
LICENSE
- Firmware: https://github.com/XIVN1987/DAPLink/blob/master/LICENSE
- PCB: MIT
Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | $74th:Register_0603_1608 | R1, R2, R3, R5 |
| 4 | M2-Hole | $74th:M2-Hole | M1, M2, M3, M4 |
| 3 | 100n | $74th:Capacitor_0603_1608 | C6, C8, C9 |
| 3 | 10u | $74th:Capacitor_0603_1608 | C3, C4, C7 |
| 3 | 5.1k | $74th:Register_0603_1608 | R4, R6, R7 |
| 2 | 22p | $74th:Capacitor_0603_1608 | C1, C2 |
| 1 | 2.2u | $74th:Capacitor_0603_1608 | C5 |
| 1 | 8M | $74th:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | Blue | $74th:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | DAPLink-SWD-Send-10Pin | $74th:Side-2x5P-PinHeader-Right | J3 |
| 1 | DAPLink-SWD-Send-6Pin | $74th:BoxPinHeader_2x05_P1.27mm_Vertical | J2 |
| 1 | Red | $74th:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | STM32V103C8T6 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | SWD_WITH_VCC | $74th:SWD-4Pin | CH1 |
| 1 | SW_SPDT | $74th:Slide_Switch | SW1 |
| 1 | USB2.0_C_v3 | $74th:USB-C-12-Pin-SMD | J1 |
The 30 most common of 31 parts.
Similar boards
- 2 layers290.1 × 130 mm

- 2 layers26.2 × 45.5 mm

PL18 multiprotocol
pascallanger/DIY-Multiprotocol-TX-Module
Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.
24 parts1.9kGPL-3.0 - 4 layers99 × 53.3 mm

PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 4 layers85 × 56 mm

- 4 layers100 × 54 mm

32Bit shift register
MaltWhiskey/Mega-Cube
16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver
64 parts766 - 2 layers44.2 × 29.3 mm

- 2 layers78 × 60 mm

- 2 layers59.1 × 99.9 mm

Cheap FOCer 2 60mm
shamansystems/Cheap-FOCer-2
Low-Cost Motor Controller based on the VESC 6
193 parts407
Questions
How big is the Ch32v203-daplink pcb PCB?
It measures 45.2 × 17.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ch32v203-daplink pcb use?
31 parts, built around the AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ch32v203-daplink pcb KiCad files?
From the 74th/ch32v203-daplink-pcb repository on GitHub, at the commit this page was made from: the board is ch32v203-daplink-pcb.kicad_pcb and its schematic ch32v203-daplink-pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ch32v203-daplink pcb design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).