2 layers290.1 × 130 mm
2 layers51.1 × 22.4 mm
Devboard stm32f303
6a-62/devboard_stm32f3031System development board for the STM32F303CCT6
- Size
- 51.1 × 22.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 53
- Pads
- 140
- Tracks, vias
- 526, 40
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 31 Jan 2020
- Updated
- 6 Feb 2020
Overview
Devboard stm32f303 is an open-source printed circuit board by 6a-62, from the 6a-62/devboard_stm32f303 repository on GitHub, published under the MIT licence. It is a 2-layer board of 51.1 × 22.4 mm with 22 parts on 53 nets, routed with 526 tracks and 40 vias.
It is built around the AMS1117-3.3. Its parts include 9 capacitors, 3 connectors, 2 resistors, 2 ICs and 2 diodes. It belongs with the microcontroller boards boards and the STM32 boards of this library.
Main components
1README
README.mddevboard_stm32f303
System development board for the STM32F303CCT6
Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100nF | Capacitor_SMD:C_0805_2012Metric | C3, C4, C5, C6, C8 |
| 2 | 1N5819 | Diode_SMD:D_SOD-123 | D1, D2 |
| 2 | 22pF | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | Conn_01x20 | Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Vertical | J3, J4 |
| 1 | 1.5k | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 100uF | Capacitor_Tantalum_SMD:CP_EIA-3528-15_AVX-H | C9 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C7 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | Crystal_Small | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 1 | Jumper_3_Open | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 1 | Polyfuse_Small | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | STM32F303CCTx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | USB_B_Mini | Connector_USB:USB_Mini-B_Lumberg_2486_01_Horizontal | J2 |
Similar boards
- 2 layers26.2 × 45.5 mm
PL18 multiprotocol
pascallanger/DIY-Multiprotocol-TX-Module
Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.
24 parts1.9kGPL-3.0 - 4 layers99 × 53.3 mm
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 4 layers85 × 56 mm
- 4 layers100 × 54 mm
32Bit shift register
MaltWhiskey/Mega-Cube
16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver
64 parts766 - 2 layers44.2 × 29.3 mm
- 2 layers78 × 60 mm
- 2 layers59.1 × 99.9 mm
Cheap FOCer 2 60mm
shamansystems/Cheap-FOCer-2
Low-Cost Motor Controller based on the VESC 6
193 parts407
Questions
How big is the Devboard stm32f303 PCB?
It measures 51.1 × 22.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Devboard stm32f303 use?
22 parts, built around the AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Devboard stm32f303 KiCad files?
From the 6a-62/devboard_stm32f303 repository on GitHub, at the commit this page was made from: the board is devboard_stm32f303.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Devboard stm32f303 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).