

Controller b r1
New public repo for work on LED Glasses
- Size
- 131.5 × 13 mm
- Copper layers
- 4
- Thickness
- 1.63 mm
- Parts
- 54
- Nets
- 49
- Pads
- 233
- Tracks, vias
- 611, 155
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 12 Oct 2019
- Updated
- 9 Apr 2024
Overview
Controller b r1 is an open-source printed circuit board by 4lml4, from the 4lml4/LED_Glasses repository on GitHub. It is a 4-layer board of 131.5 × 13 mm with 54 parts on 49 nets, routed with 611 tracks and 155 vias.
It is built around the RP2040, W25Q16JVZPIQ and SPK0641HT4H-1. Its parts include 19 capacitors, 10 resistors, 4 ICs, 3 diodes and 3 connectors. It belongs with the RP2040 boards of this library.
Main components
3RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)W25Q16JVZPIQ
WSON-8-EP(5x6)-40℃~+85℃ 100,000 cycles 10ms 10uA 120ms@(32KB) 133MHz 16Mbit 2.7V~3.6V 20 Years 400us Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection、Power lock protection SPI WSON-8-EP(5x6) NOR FLASH ROHSWinbond ElecNOR FLASHSPK0641HT4H-1
SMD-26dB 1.6V~3.6V 1mm 3mm 4mm 64.5dB 800uA Omnidirectional SMD MEMS Microphones ROHSKnowlesMEMS Microphones
README
README.mdLED_Glasses
A hobby project aimed at making sound reactive LED glasses that you should take clubbing.
Hardware
The hardware consists entirely of three PCBs without an enclosure with low profile hinges and a battery system that has yet to be worked out. The PCBs are designed in KiCAD and are as follows:
- The controller arm (
hardware/arm_mcu) which houses the microcontroller (STM32G071KBU6), a microphone (SPH0641LM4H-1) and a 3v3 linear regulator. - The power arm (
hardware/arm_power) which houses input power protection, an on switch, 5v5 switching regulator and a power good indicator. - The front display (
hardware/front_display) which houses the LED matrix (SK6812MINI).
Firmware
firmware/arduino contains an early revision of the firmware, with heavy modifications likely in future versions.
Hardware abstraction will be provided by either the STM HAL (pretty bloated and not very intuitive), STM LL (not very intuitive and a bit difficult to parse the many thousand line header files for insight), libopencm3 (haven't tried it but I've heard it's pretty good) or CMSIS (gives us the most control but literally no help haha) (i.e. we haven't decided yet but probably not Arduino).
TODO
- Read https://github.com/EdwardHartmann/SK6812RGBW for inspiration
- Decide on copyright license
- Investigate smaller LED packages
Parts
54| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 100n | Capacitor_SMD:C_0402_1005Metric | C103, C104, C107, C108, C109, C110, C111, C112, C113, C114, C115, C116, C117 |
| 4 | 1u | Capacitor_SMD:C_0402_1005Metric | C101, C102, C105, C106 |
| 3 | 10k | Resistor_SMD:R_0402_1005Metric | R102, R106, R107 |
| 3 | Polarity Protection | Diode_SMD:D_0402_1005Metric | D101, D102, D103 |
| 3 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP101, JP105, JP106 |
| 3 | SolderJumper_3_Open | rave_shades:SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm | JP102, JP104, JP107 |
| 2 | 10p | Capacitor_SMD:C_0402_1005Metric | C118, C119 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R108, R109 |
| 2 | 27R | Resistor_SMD:R_0402_1005Metric | R104, R105 |
| 2 | MountingHole | rave_shades:M1.4 Mounting Hole | H101, H102 |
| 2 | User Button | Button_Switch_SMD:SW_SPST_EVQP7A | SW101, SW102 |
| 1 | 10k | Resistor_SMD:R_Array_Convex_4x0402 | RN101 |
| 1 | 12MHz | rave_shades:ECS-120-10-36B2-CWY-TR | Y101 |
| 1 | 15k | Resistor_SMD:R_0402_1005Metric | R110 |
| 1 | 74LVCH2T45DC,125 | Package_SO:VSSOP-8_2.3x2mm_P0.5mm | U102 |
| 1 | 75k | Resistor_SMD:R_0402_1005Metric | R101 |
| 1 | DNP | Resistor_SMD:R_0402_1005Metric | R103 |
| 1 | Front Pannel Connector | rave_shades:CF35082D0RE-NH | J101 |
| 1 | NCP115ASN330T2G | Package_TO_SOT_SMD:TSOT-23-5 | U101 |
| 1 | NMOS | Package_TO_SOT_SMD:SOT-363_SC-70-6 | Q101 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U103 |
| 1 | SPK0641HT4H-1 | rave_shades:SPK0641HT4H-1 | MK101 |
| 1 | SWD Header | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J102 |
| 1 | USB Micro B | rave_shades:USB_Micro-B_Amphenol_10118192_Horizontal | J103 |
| 1 | W25Q16JVZPIQ | Package_SON:WSON-8-1EP_6x5mm_P1.27mm_EP3.4x4.3mm | U104 |
The 53 most common of 54 parts.
More from 4lml4/LED_Glasses
6- 4 layers155 × 54.5 mm

- 2 layers152.9 × 54.6 mm

- 4 layers131.5 × 13 mm

- 2 layers130.8 × 20.4 mm

- 2 layers70 × 80 mm

- 2 layers131.2 × 17.5 mm

Similar boards
- 2 layers51 × 22.7 mm

Rp2040-literal bare minimum
brunostjohn/CarveraPCBGuide
how to make PCBs with a carvera air & some thoughts + prayers
28 parts19 - 2 layers21 × 51 mm

- 2 layers248.1 × 248.1 mm

- 2 layers21 × 51 mm

- 2 layers21 × 51.1 mm

- 4 layers25 × 57.8 mm

- 4 layers100 × 70 mm

ZSWatch Watch DevKit
ZSWatch/Watch-DevKit-HW
The hardware repo for the ZSWatch Development Kit.
132 parts188GPL-3.0 - 4 layers67 × 98 mm

SJ-201-R6
MycroftAI/hardware-mycroft-mark-II
Mycroft's Mark II Rpi mechanical, electrical and industrial designs
235 parts113
Questions
How big is the Controller b r1 PCB?
It measures 131.5 × 13 mm and has 4 copper layers, 1.63 mm thick.
What parts does the Controller b r1 use?
54 parts, built around the RP2040, W25Q16JVZPIQ and SPK0641HT4H-1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Controller b r1 KiCad files?
From the 4lml4/LED_Glasses repository on GitHub, at the commit this page was made from: the board is hardware/controller_b_r1/controller_b_r1.kicad_pcb and its schematic hardware/controller_a_r1/controller_a_r1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Controller b r1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask 4lml4 before reusing the design.