

Kashboard
RP2040 Based devboard
- Size
- 21 × 51.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 36
- Nets
- 55
- Pads
- 199
- Tracks, vias
- 572, 136
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 4 Oct 2025
- Updated
- 13 Oct 2025
Overview
Kashboard is an open-source printed circuit board by kashsuks, from the kashsuks/kashboard repository on GitHub, published under the MIT licence. It is a 2-layer board of 21 × 51.1 mm with 36 parts on 55 nets, routed with 572 tracks and 136 vias.
It is built around the RP2040, W25Q16JVZPIQ and SK6812MINI-E. Its parts include 18 capacitors, 7 resistors, 4 connectors, 3 ICs and 1 diode. It belongs with the microcontroller boards boards and the RP2040 boards of this library.
Main components
3RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)W25Q16JVZPIQ
WSON-8-EP(5x6)-40℃~+85℃ 100,000 cycles 10ms 10uA 120ms@(32KB) 133MHz 16Mbit 2.7V~3.6V 20 Years 400us Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection、Power lock protection SPI WSON-8-EP(5x6) NOR FLASH ROHSWinbond ElecNOR FLASHSK6812MINI-E
SMD-40℃~+85℃ 0.6mA 1.78mm 120mcd~240mcd 120° 160mcd~320mcd 1kHz 2.8mm 2000V 3.2mm 3.7V~5.5V 460nm~470nm 515nm~525nm 620nm~625nm 800Kbit/s 815mcd~1275mcd Semi-transparent lens SMD RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsRGB LEDs(Built-In IC)
README
README.mdkashboard
kasboard is a devboard that is (sorta) based off me. It is a rp2040 based devboard that follows this. I added a neopixel APA102 that will act as a status light to indicate when the board is turned on and when it is not.
Parts
36| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C2, C3, C4, C5, C6, C7, C8, C9, C11, C12, C17, C18 |
| 2 | 10uF | Capacitor_SMD:C_0402_1005Metric | C13, C14 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R5, R6 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C1, C10 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 2 | 33pF | Capacitor_SMD:C_0402_1005Metric | C15, C16 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | Conn_01x20 | Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Vertical | J2, J3 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 12 MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | LOGO | LOGO | G*** |
| 1 | MCP1700x-330xxTT | Package_TO_SOT_SMD:SOT-23 | U2 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | SK6812MINI | LED_SMD:LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mm | D1 |
| 1 | SW_Push | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW1 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | W25Q16JVZPIQ | Package_SON:Winbond_USON-8-1EP_3x2mm_P0.5mm_EP0.2x1.6mm | U3 |
Similar boards
- 2 layers21 × 51 mm

- 2 layers51 × 22.7 mm

Rp2040-literal bare minimum
brunostjohn/CarveraPCBGuide
how to make PCBs with a carvera air & some thoughts + prayers
28 parts19 - 2 layers21 × 51 mm

- 2 layers248.1 × 248.1 mm

- 4 layers25 × 57.8 mm

- 4 layers131.5 × 13 mm

- 2 layers41.2 × 10.5 mm

- 4 layers40 × 55 mm

IoT Board V1.0
anukul1392001/IoT_Board_V1.0
IoT Board for Data Acquisition and Actuation Control.
119 partsGPL-3.0
Questions
How big is the Kashboard PCB?
It measures 21 × 51.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Kashboard use?
36 parts, built around the RP2040, W25Q16JVZPIQ and SK6812MINI-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Kashboard KiCad files?
From the kashsuks/kashboard repository on GitHub, at the commit this page was made from: the board is pcb/pcb.kicad_pcb and its schematic pcb/pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Kashboard design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).