Skip to the content
4 layers50.8 × 22.9 mmQuill stm32wl, the printed circuit board in 3D

Quill stm32wl

4f48/quill-stm32wl

An Adafruit Feather-sized STM32 development board with integrated 868 MHz LoRa radio.

Size
50.8 × 22.9 mm
Copper layers
4
Thickness
1.6 mm
Parts
34
Nets
47
Pads
168
Tracks, vias
294, 59
Pours
7
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
11 May 2026
Updated
22 May 2026

Overview

Quill stm32wl is an open-source printed circuit board by 4f48, from the 4f48/quill-stm32wl repository on GitHub. It is a 4-layer board of 50.8 × 22.9 mm with 34 parts on 47 nets, routed with 294 tracks and 59 vias.

It is built around the CH340E, RAK3172-T-8-SM-I and AP2112K-3.3, with the 1N5819WS and AO3401A among its other parts. Its parts include 10 resistors, 7 capacitors, 6 connectors, 4 ICs and 2 diodes. It belongs with the STM32 boards of this library.

Main components

5

README

README.md

Quill STM32 WL

An Adafruit Feather-sized STM32 development board with integrated 868 MHz LoRa radio.

3D render of Quill STM32 WL printed circuit board.

Features

  • 32-bit ARM Cortex-M4 48 MHz microcontroller
  • 256 kb flash, 64 kb RAM
  • LoRa P2P/LoRaWAN - Up to 15 km range with a good antenna
  • Programmable via SWD/UART/USB or control with AT Commands
  • Built-in 3.3V linear regulator, providing up to 600 mA
  • JST PH battery connector, built-in charging
  • USB-C port for power supply, USB serial, battery charging
  • Adafruit Feather-compatible dimensions
  • STEMMA QT/Qwiic connector for soldering-free I2C

Why though

I made Quill STM32 WL because I was unsatisfied with existing LoRa/long-range wireless development boards. They are either low-effort modules with ESP32 chips and huge power consumption, or use outdated parts and standards. I really liked the Adafruit Feather RP2040 RFM95 due to its size, feature-set, but it uses the older Semtech SX1276 LoRa IC.

As I was scrolling through ST Microelectronic's website (as one does), I found the perfect match: the STM32WLE5 family of microcontrollers. They offer an improved LoRa solution - with up to +22 dBm output power - in a sleek package, with an integrated, low-power STM32 microcontroller. I knew I had to try making something with it.

This was my second PCB project ever, and digging into more complicated concepts and trying to make a more dense board layout was a great challenge and an opportunity to improve my skills, before starting even more complicated projects.

Usage

You can either use Quill STM32 WL as a standalone microcontroller, by programming it via the 3-pin SWD port or USB serial, or by sending AT Commands to the UART2 serial bus on pins 12 (RX) and 13 (TX) if you just wish to use the LoRa/LoRaWAN capabilities.

For programming instructions, see RAK3172 Low Level Development Reference. For using the AT Command interface, see RAK3172 AT Command Manual. However, I personally like using Rust for embedded programming. I included a starter template for programming this board using Embassy. You can find the code in /firmware.

This board is really versatile and could be used for a wide variety of projects. Note that the MCU is not as fast as some other offerings on the market, thus it can't be used for advanced data processing. However, Quill STM32 WL is more than capable of driving sensors (for example outdoor air monitoring) and some basic processing tasks, and thanks to its LoRa capabilities, it can radio data through long distances, ideally several kilometers with clear line-of-sight, which is particularly useful for off-grid IOT systems, as an example.

Build one yourself!

In theory, you could make one of these boards for yourself. Uploading the provided Gerber files to a PCB manufacturing service (JLCPCB, PCBWay, Aisler, etc.) is simple, not very expensive and you usually get the boards quickly. You can find the production files in /production.

However, placing and soldering the SMD components on the board may prove difficult, especially if you never soldered anything before. The design uses 0402 (1005 metric) passive components to fit into the space-confined size of the board. While it may not seem like on the screen, these components are REALLY tiny. You might find it easier to have the manufacturing service mount the components for you, but that gets very expensive very fast. For example, making 5 fully assembled Quill STM32 WL with JLCPCB would cost around $130 plus shipping. Reflow/hot-air soldering is an option, but you need to have specific equipment for that.

If you still want to make one of these yourself, feel free to explore these files in this repository, they will help greatly:

Fallout Zine

Check out the magazine page for this project. Or download PDF. Quill STM32 WL Fallout Zine page

Parts

34
QtyValueFootprintReferences
510kResistor_SMD:R_0402_1005MetricR1, R2, R5, R6, R8
410uCapacitor_SMD:C_0603_1608MetricC2, C5, C6, C7
35.1kResistor_SMD:R_0402_1005MetricR7, R9, R10
2100nCapacitor_SMD:C_0402_1005MetricC1, C3
222Resistor_SMD:R_0402_1005MetricR3, R4
11N5819WSDiode_SMD:D_SOD-323D1
14.7uCapacitor_SMD:C_0402_1005MetricC4
1AO3401APackage_TO_SOT_SMD:SOT-23Q1
1AP2112K-3.3Package_TO_SOT_SMD:SOT-23-5U3
1BOOTButton_Switch_SMD:SW_SPST_PTS810SW2
1CH340EPackage_SO:MSOP-10_3x3mm_P0.5mmU2
1Conn_01x02_MountingPinConnector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_HorizontalJ2
1Conn_01x03_MountingPinConnector_JST:JST_SH_BM03B-SRSS-TB_1x03-1MP_P1.00mm_VerticalJ6
1Conn_01x04_MountingPinConnector_JST:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_VerticalJ5
1Conn_01x12Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_VerticalJ3
1Conn_01x16Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_VerticalJ4
1MCP73831-2-OTPackage_TO_SOT_SMD:SOT-23-5U4
1ORANGELED_SMD:LED_0402_1005MetricD2
1RAK3172-T-8-SM-IRF_Module:RAK3172U1
1RESETButton_Switch_SMD:SW_SPST_PTS810SW1
1USB_C_Receptacle_USB2.0_16PConnector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_HorizontalJ1

The 32 most common of 34 parts.

Similar boards

  • 4 layers41 × 60.3 mmVesta, the printed circuit board in 3D

    Vesta

    carlosgj94/vesta-wildfire-detection-hardware

    Vesta is an early-stage project to build an open source hardware device for wildfire detection. The hardware design is being done in KiCad, with the goal of making a device that is easy to manufacture, cheap to deploy…

    40 parts
  • 4 layers70 × 35 mmMIRA, the printed circuit board in 3D

    MIRA

    piecol/MIRA

    172 parts2CERN-OHL-S-2.0
  • 4 layers64 × 43 mmDalws, the printed circuit board in 3D

    Dalws

    anhldptit2610/dalws

    This project is my attempt to learn about microcontroller and PCB design. Now I realize that making a full, complete electronic project is super hard.

    83 parts2MIT
  • 4 layers48.9 × 42 mmFrostyThePCBMan, the printed circuit board in 3D

    FrostyThePCBMan

    1112luke/FrostyThePCBMan

    Final project for Embedded Systems Fall 2025

    52 parts
  • 6 layers42.8 × 66.3 mmPlant Monitor, the printed circuit board in 3D

    Plant Monitor

    C-yue28/Plant-Monitor

    ML-powered plant monitor, tracking metrics such as temperature, humidity, soil moisture, etc to inform plant watering behavior.

    59 parts
  • 4 layers37.3 × 39 mmNiRadio, the printed circuit board in 3D

    NiRadio

    Nurazkhan/NiRadio

    PCB for radio transmission?

    77 parts
  • 2 layers100 × 60 mmMother Ctrl, the printed circuit board in 3D

    Mother Ctrl

    Tomoshibi-technology/RCJ-Japan2024-Circuit

    RoboCup JapanOpen 2024とEindohoven 2024に向けての回路開発

    253 parts1MIT

Questions

How big is the Quill stm32wl PCB?

It measures 50.8 × 22.9 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Quill stm32wl use?

34 parts, built around the CH340E, RAK3172-T-8-SM-I, AP2112K-3.3 and 1N5819WS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Quill stm32wl KiCad files?

From the 4f48/quill-stm32wl repository on GitHub, at the commit this page was made from: the board is pcb/quill-stm32wl.kicad_pcb and its schematic pcb/quill-stm32wl.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Quill stm32wl design in my own project?

Its repository states no licence, so its author keeps all rights: ask 4f48 before reusing the design.