Skip to the content
2 layers42.1 × 32.7 mmLoongsonSDCardExpander, the printed circuit board in 3D

LoongsonSDCardExpander

MegaSoC/LoongsonSDCardExpander
Size
42.1 × 32.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
30
Nets
43
Pads
119
Tracks, vias
153, 23
Pours
1
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
14 Jul 2023
Updated
14 Jul 2023

Overview

LoongsonSDCardExpander is an open-source printed circuit board by MegaSoC, from the MegaSoC/LoongsonSDCardExpander repository on GitHub. It is a 2-layer board of 42.1 × 32.7 mm with 30 parts on 43 nets, routed with 153 tracks and 23 vias.

It is built around the CH340E and 1N5819WS. Its parts include 20 resistors, 3 capacitors, 3 diodes, 3 connectors and 1 IC.

Main components

2

Parts

30
QtyValueFootprintReferences
1022lc:0402_RR3, R4, R5, R6, R7, R8, R9, R10, R13, R14
647klc:0402_RR11, R12, R15, R16, R17, R18
2100nFlc:0402_CC2, C3
222klc:0402_RR19, R20
25.1klc:0402_RR1, R2
2Greenlc:0805_LED_S1_NUMD2, D3
11N5819WSlc:SOD-323D1
12.2uFlc:0402_CC1
1CH340EPackage_SO:MSOP-10_3x3mm_P0.5mmU1
1Conn_02x10_Odd_Event123yh:PinSocket_2.54mm_NoseJ3
1Micro_SD_Card_Dett123yh:XUNPU-TF-115J2
1USB_C_Receptacle_USB2.0t123yh:USB_C_Receptacle_HRO_TYPE-C-31-M-12J1

Similar boards

  • 4 layers70 × 35 mmMIRA, the printed circuit board in 3D

    MIRA

    piecol/MIRA

    172 parts2CERN-OHL-S-2.0
  • 2 layers100 × 60 mmMother Ctrl, the printed circuit board in 3D

    Mother Ctrl

    Tomoshibi-technology/RCJ-Japan2024-Circuit

    RoboCup JapanOpen 2024とEindohoven 2024に向けての回路開発

    253 parts1MIT
  • 4 layers50.8 × 22.9 mmQuill stm32wl, the printed circuit board in 3D

    Quill stm32wl

    4f48/quill-stm32wl

    An Adafruit Feather-sized STM32 development board with integrated 868 MHz LoRa radio.

    34 parts
  • 2 layers26 × 18 mmTS USB, the printed circuit board in 3D

    TS USB

    seiken-dev/TinyStick

    19 partsBSD-3-Clause
  • 4 layers45 × 41 mmOsw, the printed circuit board in 3D

    Osw

    Open-Smartwatch/open-smartwatch-gps

    Hardware design files for the GPS version of the open-smartwatch

    70 parts243GPL-3.0
  • 4 layers32 × 30 mmBreadbee, the printed circuit board in 3D

    Breadbee

    breadbee/breadbee

    Breadboard-able Cortex A7 dev board

    83 parts211GPL-3.0
  • 2 layers51 × 23.1 mmFeather rak3172, the printed circuit board in 3D

    Feather rak3172

    teapotlaboratories/feather-rak3172

    Teapotlabs Feather RAK3172: Low-cost Low-power LoRaWAN Development Board

    53 parts43MIT
  • 2 layers22.9 × 50.8 mmPenguino STM32WL LoRa E5, the printed circuit board in 3D

    Penguino STM32WL LoRa E5

    azerimaker/Penguino-STM32WL-LoRa-E5

    This repo contains all the necessary design and fabrication files for the Seeed Studio LoRa-E5 based Penguino Feather breakout board.

    58 parts42

Questions

How big is the LoongsonSDCardExpander PCB?

It measures 42.1 × 32.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the LoongsonSDCardExpander use?

30 parts, built around the CH340E and 1N5819WS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LoongsonSDCardExpander KiCad files?

From the MegaSoC/LoongsonSDCardExpander repository on GitHub, at the commit this page was made from: the board is LoongsonSDCardExpander.kicad_pcb and its schematic LoongsonSDCardExpander.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the LoongsonSDCardExpander design in my own project?

Its repository states no licence, so its author keeps all rights: ask MegaSoC before reusing the design.