4 layers49.5 × 49.5 mm
2 layers68.6 × 33 mm
Bldcdriver
22060/2025- Size
- 68.6 × 33 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 48
- Nets
- 48
- Pads
- 171
- Tracks, vias
- 160, 48
- Pours
- 13
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 18 Jun 2025
- Updated
- 18 Feb 2026
Overview
Bldcdriver is an open-source printed circuit board by 22060, from the 22060/2025 repository on GitHub. It is a 2-layer board of 68.6 × 33 mm with 48 parts on 48 nets, routed with 160 tracks and 48 vias.
It is built around the IRS2008SPBF and TLP250(F). Its parts include 9 resistors, 9 diodes, 9 connectors, 6 capacitors and 6 ICs.
Main components
2
IRS2008SPBF
SOIC-8-40℃~+125℃ 10V~20V 2 290mA 300uA 30ns 600mA 70ns Enable shutdown、Interleaved conduction protection、Dead-time control Half-Bridge IGBT、MOSFET SOIC-8 Gate Drivers ROHSInfineon TechnologiesGate Drive ICs
TLP250(F)
DIP-8-20℃~+85℃ 1 1.5A 1.8V 10V~35V 2.5kV 20mA 500ns 500ns 5V 5kV/us 5mA DC DIP-8 Logic Output Optoisolators ROHSToshibaLogic Output Optoisolators
README
README.mdgit clone https://github.com/22060/2025 --recursive
Parts
48| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R5, R6 |
| 6 | 1u | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C5, C6 |
| 6 | LED | LED_SMD:LED_0603_1608Metric | D4, D5, D6, D7, D8, D9 |
| 6 | ~ | jisaku:RS6L120BGTB1 | Q1, Q2, Q3, Q4, Q5, Q6 |
| 5 | Conn_01x01_Pin | jisaku:bldc_connector | J2, J3, J4, J8, J9 |
| 3 | 4.7k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R8, R9 |
| 3 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5, J6, J7 |
| 3 | D | Diode_SMD:D_0603_1608Metric | D1, D2, D3 |
| 3 | IRS2008S | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1, U3, U6 |
| 3 | TLP250 | Package_DIP:DIP-8_W7.62mm | U2, U4, U5 |
| 1 | Conn_01x04_Pin | Connector_Molex:Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J1 |
| 1 | LOGO | _gazou:blackpulsedrive | G*** |
| 1 | LOGO | _gazou:full | G*** |
| 1 | LOGO | _gazou:drive | G*** |
Questions
How big is the Bldcdriver PCB?
It measures 68.6 × 33 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Bldcdriver use?
48 parts, built around the IRS2008SPBF and TLP250(F). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Bldcdriver KiCad files?
From the 22060/2025 repository on GitHub, at the commit this page was made from: the board is kicad/bldcdriver/bldcdriver.kicad_pcb and its schematic kicad/EDzissen/EDzissen.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Bldcdriver design in my own project?
Its repository states no licence, so its author keeps all rights: ask 22060 before reusing the design.
More from 22060/2025
7- 4 layers49.3 × 49.9 mm
- 2 layers60.6 × 31.8 mm
- 4 layers49.3 × 49.9 mm
- 2 layers89.2 × 52.1 mm
- 2 layers91.9 × 47.2 mm
- 2 layers52.1 × 71.1 mm
Similar boards
- 4 layers101.6 × 50.8 mm
- 2 layers46 × 47 mm
- 2 layers140.7 × 47.4 mm
EG8010 A1
Millisman/EG8010
Collection of designs for the EG8010 (ASIC for single-phase SPWM control H-bridge)
201 parts17MIT - 2 layers304.6 × 105.7 mm
MPPT Booster 4kW Hardware
HNadeemTahir/AI_Inverter_Project
NgSpice Digital Twin of a complete off-grid solar power system: H-Bridge inverter (220V/50Hz, PI control, electro-thermal IGBT modeling) and 4kW MPPT boost converter (UC3843 analog control, KCL summing node, gate drive…
115 parts5 - 2 layers95 × 72 mm
- 2 layers182 × 84 mm
Boost converter
Abineshpk007/KICAD-boost-converter-gate-pulse-from-DSP-
This is my PCB, there are many outer like it but this is mine
29 parts1 - 2 layers
GB2
Andy18650/GB2-2025-team4
GitHub repository for Cambridge University Engineering part IIA project GB2: Electrical Power, Team 4
167 partsGPL-3.0 - 2 layers
PCB Design Project
asifahmad-namal2020/PCB_Design_Project
PCB of three phase inverter designed by Engr. Asif Ahmad
107 parts