

MD Tanukiti
2022以降の回路をまとめる
- Size
- 46 × 47 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 29
- Nets
- 24
- Pads
- 93
- Tracks, vias
- 164, 457
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 17 Feb 2024
- Updated
- 27 Aug 2024
Overview
MD Tanukiti is an open-source printed circuit board by shinchiryota, from the shinchiryota/Circuit repository on GitHub. It is a 2-layer board of 46 × 47 mm with 29 parts on 24 nets, routed with 164 tracks and 457 vias.
It is built around the IRS2008SPBF, BAT43 and EKI04027, with the SS14 among its other parts. Its parts include 7 capacitors, 7 resistors, 6 diodes, 4 ICs and 4 transistors.
Main components
4IRS2008SPBF
SOIC-8-40℃~+125℃ 10V~20V 2 290mA 300uA 30ns 600mA 70ns Enable shutdown、Interleaved conduction protection、Dead-time control Half-Bridge IGBT、MOSFET SOIC-8 Gate Drivers ROHSInfineon TechnologiesGate Drive ICsBAT43
DO-204AH-65℃~+125℃ 1 Independent 1V@0.2A 200mA 30V 4A 500nA@25V DO-204AH Schottky Diodes ROHSSTMicroelectronicsSchottky DiodesEKI04027
-JFETsSanken ElecSS14
SMA(DO-214AC)-55℃~+150℃ 1A 25A 300uA@40V 40V 550mV@1A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
README
README.mdParts
29| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1k | Resistor_SMD:R_0603_1608Metric | R7, R7, R8, R9, R10 |
| 4 | BAT43 | BAT43XV2:SODFL1608X70N | D7, D8, D9, D10 |
| 4 | EKI04027 | Eki04027:eki04027 | Q5, Q6, Q7, Q8 |
| 2 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C5, C6 |
| 2 | C0.1u | Capacitor_SMD:C_0603_1608Metric | C2, C4 |
| 2 | IRS2008SPBF | IRS2008SPBF_ゲートドライバ:SOIC127P600X175-8N | IC1, IC2 |
| 2 | R150 | Resistor_SMD:R_0603_1608Metric | R5, R6 |
| 2 | SS14 | SS14_大バリア:DIOM5126X250N | D3, D6 |
| 2 | TLP152_E_T | TLP152_E_T_フォトカプラ:SOIC127P700X220-6N | IC3, IC4 |
| 1 | 100uF | Capacitor_THT:C_Radial_D6.3mm_H11.0mm_P2.50mm | C7 |
| 1 | C1u | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | C_1u | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | HIF3FB-26DA-2.54DSA_71_ | Library:RHDR26W71P254_2X13_3759X600X980P | J1 |
More from shinchiryota/Circuit
1- 2 layers100 × 100 mm

Similar boards
- 2 layers100 × 100 mm

- 2 layers100 × 100 mm

- 4 layers101.6 × 50.8 mm

- 2 layers68.6 × 33 mm

- 4 layers120 × 113 mm

Voron Klipper Board
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
360 parts1.1kGPL-3.0 - 2 layers30 × 100 mm

- 2 layers100 × 100 mm

- 2 layers54 × 64 mm

DonConIOmini
ravinrabbid/DonCon2040
RP2040 based firmware and hardware for DIY Taiko no Tatsujin Drum Controllers
96 parts66MIT
Questions
How big is the MD Tanukiti PCB?
It measures 46 × 47 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MD Tanukiti use?
29 parts, built around the IRS2008SPBF, BAT43, EKI04027 and SS14. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MD Tanukiti KiCad files?
From the shinchiryota/Circuit repository on GitHub, at the commit this page was made from: the board is 2024/MD_Tanukiti/mD.kicad_pcb and its schematic 2024/MD_Tanukiti/mD.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MD Tanukiti design in my own project?
Its repository states no licence, so its author keeps all rights: ask shinchiryota before reusing the design.