2 layers83.8 × 94.6 mm
4 layers49.3 × 51.8 mm
Mega
1vers1on/MegaA microcontroller based on the RP2350B with a dedicated dac and adc, plus wifi and bluetooth.
- Size
- 49.3 × 51.8 mm
- Copper layers
- 4
- Thickness
- 1.62 mm
- Parts
- 52
- Nets
- 103
- Pads
- 343
- Tracks, vias
- 820, 87
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 8 Jan 2026
- Updated
- 8 Jan 2026
Overview
Mega is an open-source printed circuit board by 1vers1on, from the 1vers1on/Mega repository on GitHub. It is a 4-layer board of 49.3 × 51.8 mm with 52 parts on 103 nets, routed with 820 tracks and 87 vias.
It is built around the RP2350B, AD5683RACPZ-2RL7 and ADC122S021CIMM, with the W25Q128JVPIQ, AP2112K-3.3 and ESP32-C6-MINI-1 among its other parts. Its parts include 27 capacitors, 7 ICs, 7 connectors, 4 resistors and 1 diode. It belongs with the radio and wireless boards and the ESP32, RP2350 and RISC-V boards of this library.
Main components
8
RP2350B
QFN-80-EP(10x10)48 Power-on reset (POR)、Watchdog reset、External pin reset (NRST)、Built-in general-purpose timer、Integrated LDO、True random number generator (TRNG)、Hardware ECC check、Independent watchdog (IWDG) QFN-80-EP(10x10) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
AD5683RACPZ-2RL7
LFCSP-8-UD(2x2)-40℃~+105℃ 1 16 2.7V~5.5V 2LSB 350uA 5us Integrated buffer、Power-on reset、Power-down mode、Programmable gain、Soft reset、Built-in reference source SPI Voltage Buffer LFCSP-8-UD(2x2) Digital to Analog Converters (DAC) ROHSAnalog DevicesDigital To Analog Converters (DAC)
ADC122S021CIMM
VSSOP-8-40℃~+85℃ 0.35LSB 12 2 2.7V~5.25V 50kHz 620uA 72dB 800kHz~3.2MHz No SAR SPI VSSOP-8 Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)
W25Q128JVPIQ
WSON-8-EP(5x6)-40℃~+85℃ 100,000 cycles 10uA 120ms@(32KB) 128Mbit 133MHz 2.7V~3.6V 20 Years Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection、Power lock protection SPI WSON-8-EP(5x6) NOR FLASH ROHSWinbond ElecNOR FLASH
AP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorised
ESP32-C6-MINI-1
SMD,13.2x16.6mmSMD,13.2x16.6mm New Arrivals ROHSEspressif SystemsUncategorised
ABM8-272-T3
SMD3225-4P-40℃~+85℃ 10pF 12MHz 50Ω SMD crystal oscillator ±30ppm ±30ppm SMD3225-4P Crystals ROHSAbraconCrystals
AOTA-B201610S3R3-101-T
0806115mΩ 2.1A 2.4A 3.3uH Molded inductor 0806 Molding Power Inductors ROHSAbraconPower Inductors
Parts
52| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C6, C7, C12, C14, C17, C18, C20, C22, C23, C24, C25 |
| 7 | 1uF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4, C11, C13, C19 |
| 6 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C5, C8, C9, C10, C16, C21 |
| 2 | 10pF | Capacitor_SMD:C_0402_1005Metric | C26, C27 |
| 2 | 22 | Resistor_SMD:R_0402_1005Metric | R2, R3 |
| 2 | Conn_01x20_Pin | Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Vertical | J4, J5 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2 |
| 1 | 0022232041 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J3 |
| 1 | 10nF | Capacitor_SMD:C_0402_1005Metric | C15 |
| 1 | 220 | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 33 | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 4677 | footprints:SOIC127P600X175-8N | J2 |
| 1 | ABM8-272-T3 | footprints:XTAL_ABM8-272-T3 | Y1 |
| 1 | AD5683RACPZ-2RL7 | footprints:CP_8_10_ADI | U4 |
| 1 | ADC122S021CIMM | footprints:SOP65P490X110-8N | U3 |
| 1 | AOTA-B201610S3R3-101-T | footprints:AOTAB201610S3R3101T | L1 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | Conn_01x02_Pin | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J7 |
| 1 | ESP32-C6-MINI-1 | RF_Module:ESP32-C6-MINI-1 | U5 |
| 1 | LED | Diode_SMD:D_0603_1608Metric | D1 |
| 1 | Micro_SD_Card | Connector_Card:microSD_HC_Molex_47219-2001 | J6 |
| 1 | RP2350B | KiCadpretty:QFN40P1000X1000X90-81N-D | IC1 |
| 1 | SW_SPST | Button_Switch_SMD:SW_SPST_PTS810 | SW1 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1 |
| 1 | TLV70033_SOT23-5 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | USB_B_Micro | digikey-footprints:USB_Micro_AB_Female_0475890001 | J1 |
| 1 | W25Q128JVPIQ | Package_SON:WSON-8-1EP_6x5mm_P1.27mm_EP3.4x4.3mm | IC2 |
Questions
How big is the Mega PCB?
It measures 49.3 × 51.8 mm and has 4 copper layers, 1.62 mm thick.
What parts does the Mega use?
52 parts, built around the RP2350B, AD5683RACPZ-2RL7, ADC122S021CIMM and W25Q128JVPIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mega KiCad files?
From the 1vers1on/Mega repository on GitHub, at the commit this page was made from: the board is mega.kicad_pcb and its schematic mega.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mega design in my own project?
Its repository states no licence, so its author keeps all rights: ask 1vers1on before reusing the design.
Similar boards
- 4 layers53.5 × 49.5 mm
- 2 layers32.5 × 36 mm
- 4 layers89 × 61 mm
- 2 layers90 × 100 mm
- 4 layers50 × 70 mm
- 4 layers100 × 100 mm
FarmMesh Node
chinawrj/FarmMesh-Node
Developing an integrated hardware and software solution for farm-wide Mesh networking: RP2350B/ESP32-C5 nodes, firmware, network protocols, and Wi-Fi/BLE sensor access.
164 parts - 4 layers68.6 × 56 mm
Cartridge
coco-chameleon/chameleon-hardware
TRS-80 Color Computer cartridge emulator
95 partsCERN-OHL-W-2.0