4 layers255 × 181.3 mm
4 layers43 × 54 mm
Tracking inator
1ConHeoUnIn/Pcb_design- Size
- 43 × 54 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 9
- Nets
- 22
- Pads
- 50
- Tracks, vias
- 108, 0
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 14 Aug 2025
- Updated
- 14 Aug 2025
Overview
Tracking inator is an open-source printed circuit board by 1ConHeoUnIn, from the 1ConHeoUnIn/Pcb_design repository on GitHub. It is a 4-layer board of 43 × 54 mm with 9 parts on 22 nets, routed with 108 tracks and 0 vias.
It is built around the DRV8833PW. Its parts include 2 ICs, 2 connectors and 1 diode. It belongs with the ESP32 and RISC-V boards of this library.
Main components
1Parts
9| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | ~ | welding_pad:2pin_pad_THT | P1, P2 |
| 1 | ESP32-C3_SUPERMINI_SMD | esp32_c3_super_mini:MODULE_ESP32_C3_SUPERMINI_THT | U1 |
| 1 | GY_271_module | qmc5883l:gy_271_module | G1 |
| 1 | MPU6050 | mpu6050:mpu6050_module | U2 |
| 1 | drv8833 | header:DRV8833 | D1 |
| 1 | ld2410b | header:ld2410b | h1 |
| 1 | oled 0.96 | oled:oled_0.96 | o1 |
| 1 | ~ | header:source | h2 |
More from 1ConHeoUnIn/Pcb_design
4
Similar boards
- 2 layers110 × 110 mm
- 4 layers102 × 100 mm
Zelvicka
RoboticsBrno/Robutek
Robůtek je robotická platforma založená na čipu ESP32-S3. Je velice rozšitiřelný, ale ze základu umí jezdit, kreslit fixou, jezdit po čáře, pohybovat se bludištěm. Programování je přes Jaculus.
214 parts12 - 2 layers60 × 100 mm
- 2 layers91.9 × 67.1 mm
UpdatedPCB2024
CWRUbotix/Micromouse-2023-24
A fully autonomous maze-solving not-quite-mouse-sized robot.
31 parts6GPL-3.0 - 2 layers119.4 × 98.9 mm
PCB Pami
FIPATECH/CDFR26_PAMI
Open source firmware and PCB for a differential mobile robot (PAMI) based on ESP32-S3 - Coupe de France de Robotique
25 parts6 - 2 layers93.6 × 102.8 mm
Mote hardware
empriselab/mote
A low cost, high confidence mobile robot optimized for education.
75 parts5MIT - 2 layers104.1 × 76.2 mm
Biotracker tracks
interspecifics/ComunicacionesEspeculativas
Es un proyecto basado en una máquina que es capaz de observar y aprender de microorganismos para crear un score audiovisual a partir de los patrones que encuentre en su comportamiento.
16 parts4 - 2 layers71.5 × 48.3 mm
Esp32-2wd
nochkin/esp-line-follower
A simple educational project to build a line following 2WD robot
13 parts3MIT
Questions
How big is the Tracking inator PCB?
It measures 43 × 54 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Tracking inator use?
9 parts, built around the DRV8833PW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tracking inator KiCad files?
From the 1ConHeoUnIn/Pcb_design repository on GitHub, at the commit this page was made from: the board is Tracking_inator/Tracking_inator.kicad_pcb and its schematic Tracking_inator/Tracking_inator.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tracking inator design in my own project?
Its repository states no licence, so its author keeps all rights: ask 1ConHeoUnIn before reusing the design.