

Hermes
- Size
- 50 × 80 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 75
- Nets
- 97
- Pads
- 280
- Tracks, vias
- 663, 125
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 12 Mar 2021
- Updated
- 22 Apr 2021
Overview
Hermes is an open-source printed circuit board by 1337bowen, from the 1337bowen/Strife repository on GitHub, published under the MIT licence. It is a 4-layer board of 50 × 80 mm with 75 parts on 97 nets, routed with 663 tracks and 125 vias.
It is built around the BMP280, IS25LP064A-JBLE and DM3D-SF, with the BMI088, 10118194-0001LF and B5817WS-TP among its other parts. Its parts include 19 capacitors, 16 connectors, 15 resistors, 6 ICs and 4 diodes. It belongs with the SAM D and SAM boards of this library.
Main components
8BMP280
LGA-8(2x2.5)-40℃~+85℃ 0.12hpa 1.5pa/K 1.71V~3.6V 1hpa 300nA 30Kpa~1.1bar I2C、SPI Integrated ADC and digital interface、On-chip calibration and non-volatile storage、Standby mode、On-chip temperature output LGA-8(2x2.5) Pressure Sensors ROHSBoschPressure SensorsIS25LP064A-JBLE
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 10uA 133MHz 2.3V~3.6V 20 Years 64Mbit 800us SPI SOIC-8-208mil NOR FLASH ROHSISSINOR FLASHDM3D-SF
SMD-25℃~+85℃ 1.55mm Connector and Ejector MicroSD Card (TF Card) No Push-Pull SMD SD Card / Memory Card Connector ROHSHirose ElectricSD Card / Memory Card ConnectorBMI088
LGA-16(3x4.5)-40℃~+85℃ Accelerometer Gyroscope LGA-16(3x4.5) Accelerometers ROHSBosch SensortecAccelerometers10118194-0001LF
SMD-30℃~+80℃ 1 100V 5P Black Female Micro-B USB 2.0 SMD USB Connectors ROHSAmphenolUSB ConnectorsB5817WS-TP
SOD-3231 Independent 10A 1A 1mA@20V 20V 750mV@3A SOD-323 Schottky Diodes ROHSMicro Commercial ComponentsSchottky DiodesPTS647SK38SMTR2 LFS
SMD-4P,4.5x4.1mm-20℃~+70℃ 100,000 cycles 12V 2.5N 3.8mm 4.5mm 4.5mm 50mA Gull Wing IP40 Round Button SPST-NO Surface Mount,Vertical SMD-4P,4.5x4.1mm Tactile Switches ROHSC&KTactile SwitchesUSBLC6-2SC6Y
SOT-23-6-55℃~+125℃ 0.6pF、1pF 12V 150W@8/20us 5V 6.5V 80nA 9A@8/20us IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
README
README.mdStrife
Parts
75| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C2, C5, C9, C10, C14, C15, C16, C17, C18 |
| 4 | 470 | Resistor_SMD:R_0603_1608Metric | R12, R13, R14, R15 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | digikey-footprints:SOT-23-3 | Q1, Q2, Q3 | |
| 2 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C1, C6 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric | C8, C19 |
| 2 | 1u | Capacitor_SMD:C_0805_2012Metric | C12, C13 |
| 2 | 22p | Capacitor_SMD:C_0603_1608Metric | C3, C4 |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric | R5, R7 |
| 2 | 5.6 | Resistor_SMD:R_0603_1608Metric | R8, R9 |
| 1 | 0.4 | SamacSys_Parts:PWR163S25R400FE | R10 |
| 1 | 1.5k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 100 @ 100MHz | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 10118194-0001LF | footprints:AMPHENOL_10118194-0001LF | J5 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric | C11 |
| 1 | 200k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 32.768KHz | footprints:CRYSTAL_ECS | Y1 |
| 1 | 330 | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 3V3 OUT | TerminalBlock_4Ucon:TerminalBlock_4Ucon_1x02_P3.50mm_Vertical | J9 |
| 1 | 4.7uH | footprints:IND_ECS-MPI4040R2-4R7-R | L1 |
| 1 | 47u | Capacitor_SMD:C_1206_3216Metric | C7 |
| 1 | 500 mA | Fuse:Fuse_0805_2012Metric | F1 |
| 1 | 5V OUT | TerminalBlock_4Ucon:TerminalBlock_4Ucon_1x02_P3.50mm_Vertical | J8 |
| 1 | 68 | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | AP63205WU-7 | Package_TO_SOT_SMD:TSOT-23-6 | IC2 |
| 1 | ATSAMD21G18A-MUT | footprints:ATSAMD21G18A-MUT | IC1 |
| 1 | AZ1117-3.3 | Package_TO_SOT_SMD:SOT-223 | U1 |
| 1 | B5817WS-TP | Diode_SMD:D_SOD-323 | D2 |
| 1 | BATT IN | TerminalBlock_4Ucon:TerminalBlock_4Ucon_1x02_P3.50mm_Vertical | J11 |
| 1 | BATT SW | SamacSys_Parts:JS202011SCQN | S2 |
| 1 | BATT SW BY | TerminalBlock_4Ucon:TerminalBlock_4Ucon_1x02_P3.50mm_Vertical | J12 |
| 1 | BMI088 | SamacSys_Parts:BMI088 | U2 |
| 1 | BMP280 | digikey-footprints:LGA-8_2x2.5mm_BMP280 | U3 |
| 1 | DM3D-SF | footprints:HRS_DM3D-SF | J14 |
| 1 | FANY | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | FANZ | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | I2C | SamacSys_Parts:0532617004 | J6 |
| 1 | IS25LP064A-JBLE | SamacSys_Parts:SOIC127P790X216-8N | IC3 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3 |
| 1 | LED_RGB | footprints:150352M173300 | D4 |
| 1 | LOGO | LogoSilkscreens:HermesLogo | G*** |
| 1 | LOGO | LogoSilkscreens:HermesText | G*** |
| 1 | PTS_647_SK38_SMTR2_LFS | SamacSys_Parts:PTS647SK38SMTR2LFS | S1 |
| 1 | PYRO1 | TerminalBlock_4Ucon:TerminalBlock_4Ucon_1x02_P3.50mm_Vertical | J15 |
| 1 | PYRO2 | TerminalBlock_4Ucon:TerminalBlock_4Ucon_1x02_P3.50mm_Vertical | J16 |
| 1 | PYRO3 | TerminalBlock_4Ucon:TerminalBlock_4Ucon_1x02_P3.50mm_Vertical | J17 |
| 1 | SWD | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J10 |
| 1 | TVCY | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | TVCZ | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | UART | SamacSys_Parts:0532617004 | J7 |
| 1 | USBLC6-2SC6Y | digikey-footprints:SOT23-6L | D1 |
More from 1337bowen/Strife
1- 4 layers40 × 80 mm

Similar boards
- 2 layers86.2 × 50.2 mm

MostlyBuildsSpeakerPod
MostlyBuilds/speaker-pod-pcb
This is a PCB design for an ESP32-based speaker controller
93 parts3CC-BY-SA-4.0 - 12 layers68 × 40 mm

Teresina Rack
marcoallegretti/Teresina-Rack
The goal is an open, self-fabricatable Daisy Patch SM-compatible Eurorack submodule: the same carrier interface and libDaisy application compatibility through a small Teresina firmware variant.
214 parts - 4 layers60 × 66.5 mm

- 4 layers65 × 75 mm

HomeAssistant
WojciechM98/Home-assistant-ESP32
Home assistand board using ESP32 controlled with MQTT protocol.
151 parts - 2 layers136 × 58 mm

- 4 layers59 × 31 mm

- 4 layers93.3 × 40.7 mm

- 2 layers93 × 61 mm

Questions
How big is the Hermes PCB?
It measures 50 × 80 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Hermes use?
75 parts, built around the BMP280, IS25LP064A-JBLE, DM3D-SF and BMI088. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hermes KiCad files?
From the 1337bowen/Strife repository on GitHub, at the commit this page was made from: the board is Electrical/Hermes/Hermes.kicad_pcb and its schematic Electrical/Titan_R3/Titan_R3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hermes design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).