Skip to the content
4 layers54.5 × 48.5 mmRegister 32b, the printed circuit board in 3D

A PCB that stores 32b and has 5-bit addressing.

Size
54.5 × 48.5 mm
Copper layers
4
Thickness
1.6 mm
Parts
103
Nets
92
Pads
369
Tracks, vias
1,406, 234
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
16 Jun 2025
Updated
16 Jun 2025

Overview

Register 32b is an open-source printed circuit board by 100thAccount, from the 100thAccount/Register-32b-PCB repository on GitHub, published under the MIT licence. It is a 4-layer board of 54.5 × 48.5 mm with 103 parts on 92 nets, routed with 1,406 tracks and 234 vias.

Its parts include 21 diodes, 13 capacitors, 12 resistors and 2 transistors.

README

README.md

32 Bit Register

Introduction

This is a 32 bit singular register for my CPU. It has 5 bits to address the register (5 for store enable, 5 for output enable) and a sixth one, which should only be used if necessary. Multiple registers can be connected on top of each other.

More info

Please note that the register is untested and functionality can't be guaranteed.

More info is available in the datasheet PDF.

Parts

103
QtyValueFootprintReferences
32TestPoint_ProbeTestPoint:TestPoint_Pad_1.0x1.0mmTP1, TP2, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18, TP19, TP20, TP21, TP22, TP23 +16
13C_SmallCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13
12300ΩResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R14
12DDiode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolderD33, D34, D35, D36, D37, D38, D39, D40, D41, D42, D43, D44
9LEDLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD1, D2, D3, D4, D5, D6, D7, D8, D9
8~Texas Instruments Logic Footprints:SNx4HCT125Buffer1, Buffer2, Buffer3, Buffer4, Buffer5, Buffer6, Buffer7, Buffer8
5~Other:Single Bit Mini Bus0V1, 5V1, DEBUG1, OE1, STO1
4~Other:8 Bit Bus SmallBus1, Bus2, Bus3, Bus4
4~Other:SN74HC273 TSSOPReg1, Reg2, Reg3, Reg4
2BC818Package_TO_SOT_SMD:SOT-23Q1, Q2
2~Other:5 Bit Bus With Passing HolesOE-Bus1, STO-Bus1

Similar boards

  • 4 layers38 × 39 mmCLN17-V1.5, the printed circuit board in 3D

    CLN17-V1.5

    creapunk/CLN-ClosedLoopNemaDriver

    Compact closed-loop stepper motor driver designed for NEMA motors

    103 parts1.1k
  • 4 layers80 × 50 mmHadesNT, the printed circuit board in 3D

    HadesNT

    pms67/HadesFCS

    Complete flight control system designed from scratch. Hardware designed with KiCad.

    103 parts1kBSD-3-Clause
  • 4 layers72.8 × 38.3 mmAdc 32xx, the printed circuit board in 3D

    Adc 32xx

    loxodes/vna

    Under development open hardware microwave vector network analyzer

    103 parts205
  • 4 layers17.8 × 38.1 mmReDIP SID, the printed circuit board in 3D

    ReDIP SID

    daglem/reDIP-SID

    MOS 6581 / 8580 SID FPGA emulation platform

    103 parts121
  • 4 layers79 × 79 mmMinuet, the printed circuit board in 3D

    Minuet

    brown-studios/minuet

    Minuet upgrades your MAXXAIR Maxxfan with a brushless DC motor, home automation features, and accessories.

    103 parts67MIT
  • 4 layers32 × 74 mmMicrofrank, the printed circuit board in 3D

    Microfrank

    rh1tech/frank

    RP2350 Based Hardware Emulation Platform

    103 parts66GPL-3.0
  • 4 layers161.6 × 100 mmNubus to ztex, the printed circuit board in 3D

    Nubus to ztex

    MelkhiorVintageComputing/NuBusFPGA

    Stuff to put a FPGA in a NuBus Macintosh

    103 parts63
  • 4 layers150 × 95 mmSkysweep32 rev c, the printed circuit board in 3D

    Skysweep32 rev c

    bobberdolle1/SkySweep32

    Open-source passive multi-band RF monitoring system | 855–925 MHz, 2.4 GHz, 5.8 GHz | Rev C first prototype

    103 parts33GPL-3.0

Questions

How big is the Register 32b PCB?

It measures 54.5 × 48.5 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Register 32b use?

103 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Register 32b KiCad files?

From the 100thAccount/Register-32b-PCB repository on GitHub, at the commit this page was made from: the board is Register 32b.kicad_pcb and its schematic Register 32b.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Register 32b design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).