
CLN17-V1.5
creapunk/CLN-ClosedLoopNemaDriver
Compact closed-loop stepper motor driver designed for NEMA motors

A PCB that stores 32b and has 5-bit addressing.
Register 32b is an open-source printed circuit board by 100thAccount, from the 100thAccount/Register-32b-PCB repository on GitHub, published under the MIT licence. It is a 4-layer board of 54.5 × 48.5 mm with 103 parts on 92 nets, routed with 1,406 tracks and 234 vias.
Its parts include 21 diodes, 13 capacitors, 12 resistors and 2 transistors.
This is a 32 bit singular register for my CPU. It has 5 bits to address the register (5 for store enable, 5 for output enable) and a sixth one, which should only be used if necessary. Multiple registers can be connected on top of each other.
Please note that the register is untested and functionality can't be guaranteed.
More info is available in the datasheet PDF.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 32 | TestPoint_Probe | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1, TP2, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18, TP19, TP20, TP21, TP22, TP23 +16 |
| 13 | C_Small | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13 |
| 12 | 300Ω | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R14 |
| 12 | D | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D33, D34, D35, D36, D37, D38, D39, D40, D41, D42, D43, D44 |
| 9 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D3, D4, D5, D6, D7, D8, D9 |
| 8 | ~ | Texas Instruments Logic Footprints:SNx4HCT125 | Buffer1, Buffer2, Buffer3, Buffer4, Buffer5, Buffer6, Buffer7, Buffer8 |
| 5 | ~ | Other:Single Bit Mini Bus | 0V1, 5V1, DEBUG1, OE1, STO1 |
| 4 | ~ | Other:8 Bit Bus Small | Bus1, Bus2, Bus3, Bus4 |
| 4 | ~ | Other:SN74HC273 TSSOP | Reg1, Reg2, Reg3, Reg4 |
| 2 | BC818 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | ~ | Other:5 Bit Bus With Passing Holes | OE-Bus1, STO-Bus1 |

creapunk/CLN-ClosedLoopNemaDriver
Compact closed-loop stepper motor driver designed for NEMA motors

pms67/HadesFCS
Complete flight control system designed from scratch. Hardware designed with KiCad.



brown-studios/minuet
Minuet upgrades your MAXXAIR Maxxfan with a brushless DC motor, home automation features, and accessories.



bobberdolle1/SkySweep32
Open-source passive multi-band RF monitoring system | 855–925 MHz, 2.4 GHz, 5.8 GHz | Rev C first prototype
It measures 54.5 × 48.5 mm and has 4 copper layers, 1.6 mm thick.
103 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the 100thAccount/Register-32b-PCB repository on GitHub, at the commit this page was made from: the board is Register 32b.kicad_pcb and its schematic Register 32b.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).