2 layers25.4 × 25.4 mm
2 layers25.4 × 25.4 mm
Rct
0x007E/rctRGB Color Cube Touch
- Size
- 25.4 × 25.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 17
- Pads
- 57
- Tracks, vias
- 51, 22
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 23 May 2026
- Updated
- 23 May 2026
Overview
Rct is an open-source printed circuit board by 0x007E, from the 0x007E/rct repository on GitHub. It is a 2-layer board of 25.4 × 25.4 mm with 22 parts on 17 nets, routed with 51 tracks and 22 vias.
It is built around the ATTINY402-SSN and BH-67D-5. Its parts include 7 capacitors, 5 resistors, 2 ICs, 2 diodes and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100n | Capacitor_SMD:C_1206_3216Metric | C1, C2, C3 |
| 3 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1, TP2, TP3 |
| 2 | 1Meg | Resistor_SMD:R_1206_3216Metric | R1, R2 |
| 2 | 1u | Capacitor_SMD:C_1206_3216Metric | C4, C5 |
| 2 | 47p | Capacitor_SMD:C_1206_3216Metric | C6, C7 |
| 2 | APA102 | LED_SMD:LED_RGB_5050-6 | D1, D2 |
| 1 | 470 | Resistor_SMD:R_1206_3216Metric | R5 |
| 1 | 47R | Resistor_SMD:R_1206_3216Metric | R3 |
| 1 | ATtiny402-SS | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | BH-67D-5 | Battery_BH:BAT_BH-67D-5 | BT1 |
| 1 | Conn_01x01_Pin | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | J1 |
| 1 | IQS228BTSR | Package_TO_SOT_SMD:TSOT-23-6 | U2 |
| 1 | QR | Images:QR_0x007e_extreme_small | FID1 |
| 1 | n.B. | Resistor_SMD:R_1206_3216Metric | R4 |
Questions
How big is the Rct PCB?
It measures 25.4 × 25.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Rct use?
22 parts, built around the ATTINY402-SSN and BH-67D-5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Rct KiCad files?
From the 0x007E/rct repository on GitHub, at the commit this page was made from: the board is pcb/RCT.kicad_pcb and its schematic pcb/RCT.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Rct design in my own project?
Its repository states no licence, so its author keeps all rights: ask 0x007E before reusing the design.
Similar boards
- 2 layers150.3 × 105.1 mm
- 2 layers
- 2 layers75.8 × 19.2 mm
3S coinCellChargeController
PocketConcepts/Pocket_PSU
A variable current & voltage PSU with 3S lipo charging, balancing, and protection circuit using PPS.
78 parts36 - 2 layers72 × 47.5 mm
PCB avr dx unbricker
k-takata/PCB_avr_dx_unbricker
UPDI High Voltage programmer for AVR Dx/Ex series
40 parts4 - 2 layers85 × 53 mm
Cccamp23 nametag
HazeCore/Nametag_Hardware
This is the hardware for out Nametag Badge for Chaos Communication Camp 2023. You can find more information about the Project at https://hazeco.re/cccamp-nametag/.
34 parts3 - 2 layers7.4 × 7.3 mm
DCC Dekoder Attiny402 1
markusgruen/DccFunctionDecoder
Open source, Arduino-based DCC function decoder
17 parts3GPL-3.0 - 2 layers69.9 × 12.1 mm
