

MGC module
MeGARCard - ATMega4809 Module
- Size
- 33 × 48.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 48
- Nets
- 74
- Pads
- 214
- Tracks, vias
- 449, 128
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 12 Jun 2026
- Updated
- 8 Aug 2026
Overview
MGC module is an open-source printed circuit board by 0x007E, from the 0x007E/mgc_m4809 repository on GitHub. It is a 2-layer board of 33 × 48.9 mm with 48 parts on 74 nets, routed with 449 tracks and 128 vias.
It is built around the ATMEGA4809-AF, DG418LDY-E3 and 103P012BB100, with the BAT43 among its other parts. Its parts include 14 resistors, 13 capacitors, 5 connectors, 3 ICs and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
4ATMEGA4809-AF
TQFP-48(7x7)-40℃~+125℃ 1.8V~5.5V 10bit 20MHz 256Byte 41 48KB 6KB 8 Bit AVR Built-in FLASH TQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)DG418LDY-E3
SOIC-8-40℃~+85℃ -6V~-3V、3V~12V、3V~6V 13ns 14Ω 15pF 28ns 2:1 Glitch-free switching SOIC-8 Analog Switches, Multiplexers ROHSVishay IntertechnologyAnalog Switches, Multiplexers103P012BB100
SMD,P=0.35mm-40℃~+85℃ 0.35mm 12P 2 300mA、5A 30V Copper alloy Gold Slot Type Butting Surface Mount,Vertical SMD,P=0.35mm Board-to-Board and Backplane Connector ROHSAmphenolBoard-To-Board And Backplane ConnectorBAT43
DO-204AH-65℃~+125℃ 1 Independent 1V@0.2A 200mA 30V 4A 500nA@25V DO-204AH Schottky Diodes ROHSSTMicroelectronicsSchottky Diodes
README
README.mdMGC_module - ATmega4809
The ATmega4809 (mgc_module) is an adaptable board for the MeGARCard. The board offers the possibility to control the MeGARCard with an ATmega4809. The board itself is connected to the MeGARCard within the pcb-to-pcb connectors (no soldering necessary). With the onboard dip-switches the board voltage can be regulated from 3V3 to 5V. Also the usage of hardware-/software-twi to control the SSD1306-display on the megacard can be selected.
To mount the board on the
MeGARCarddisconnect the power source (USB-Cconnector) or any other used source from the MeGARCard!
| Experience | Level |
|---|---|
| Soldering |
Downloads
| Type | File | Description |
|---|---|---|
| Schematic | pdf / cadlab | Schematic files |
| Board | pdf / cadlab | Board file |
| Drill | Drill file | |
| BoM | xlsx / html | Bill of Material as Excel/interactive HTML |
| PCB | zip / tar | KiCAD/Gerber/BoM/Drill files |
Hardware
The pcb is created with KiCAD. All files are built with github actions so that they are ready for a production environment.
PCB
The circuit board is populated on both sides (Top, Bottom). The best way for soldering the SMD components is within a vapor phase soldering system and for the THT components with a standard soldering system.
Top Layer

Bottom Layer

Additional Information
Parts
48| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100n | Capacitor_SMD:C_1206_3216Metric | C2, C3, C4, C5, C6, C7, C8, C9, C10, C11 |
| 6 | 0R | Resistor_SMD:R_1206_3216Metric | R4, R5, R13, R14, R15, R16 |
| 5 | 103P012BB100 | Connector_Amphenol_SMD:AMPHENOL_103P012BB100 | J3, J7, J11, J12, J13 |
| 2 | 10pF | Capacitor_SMD:C_0603_1608Metric | C12, C13 |
| 2 | 1k | Resistor_SMD:R_1206_3216Metric | R1, R8 |
| 2 | 22k | Resistor_SMD:R_1206_3216Metric | R7, R9 |
| 2 | DG418LDY | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1, U2 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_2.7mm_M2.5_DIN965_Pad | H1, H2 |
| 2 | NetTie_2 | NetTie:NetTie-2_SMD_Pad0.5mm | NT1, NT2 |
| 1 | 0 | Resistor_SMD:R_1206_3216Metric | R3 |
| 1 | 100u | Capacitor_Tantalum_SMD:CP_EIA-3528-21_Kemet-B | C1 |
| 1 | 10k | Resistor_SMD:R_1206_3216Metric | R10 |
| 1 | 10uH | Inductor_SMD:L_1206_3216Metric | L1 |
| 1 | 32.768k | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | 470 | Resistor_SMD:R_1206_3216Metric | R6 |
| 1 | 47R | Resistor_SMD:R_1206_3216Metric | R2 |
| 1 | ATmega4809-A | Package_QFP:TQFP-48_7x7mm_P0.5mm | U3 |
| 1 | BAT43 | Diode_SMD:D_MiniMELF | D1 |
| 1 | BIN | Symbol:WEEE-Logo_4.2x6mm_SilkScreen | FID1 |
| 1 | ESD | Symbol:ESD-Logo_6.6x6mm_SilkScreen | FID3 |
| 1 | LOGO | LOGO | G*** |
| 1 | OH | Symbol:OSHW-Logo2_7.3x6mm_SilkScreen | FID2 |
| 1 | QR | Images:QR_0x007e_very_small | FID4 |
| 1 | SW_DIP_x02 | Button_Switch_SMD:SW_DIP_SPSTx02_Slide_6.7x6.64mm_W6.73mm_P2.54mm_LowProfile_JPin | SW1 |
Similar boards
- 2 layers33 × 48.9 mm

- 2 layers33 × 48.9 mm

- 2 layers33 × 48.9 mm

- 4 layers24.5 × 69.7 mm

TouchSensor
janrenegradwohl/Macropad
DIY Project, involves STM32F411 as Macropad and STM32F334 as TouchSlider, not finished yet
88 parts - 2 layers30 × 65 mm

- 6 layers60 × 55 mm

PoE Ethernet GPIB Adapter
Kofen/PoE_Ethernet_GPIB_Adapter
This folder contains the necessary hardware files for the PoE Ethernet GPIB Adapter project.
198 parts120GPL-3.0 - 2 layers64.8 × 73.7 mm

Vr65c02-v1
crmaykish/VR65C02
Replacing all the memory and peripherals in a 6502 computer with a single ATMEGA4809 microcontroller
27 parts15MIT - 2 layers150 × 100 mm

Christmas banana synth
adaand00/christmas-banana-synth
The Christmas banana synth is a stylophone synthesizer with 24 keys and a buzzer for sound. The back features PCB art of a winter landscape. There are also 12 built-in songs available.
87 parts2
Questions
How big is the MGC module PCB?
It measures 33 × 48.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MGC module use?
48 parts, built around the ATMEGA4809-AF, DG418LDY-E3, 103P012BB100 and BAT43. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MGC module KiCad files?
From the 0x007E/mgc_m4809 repository on GitHub, at the commit this page was made from: the board is pcb/MGC_module.kicad_pcb and its schematic pcb/MGC_module.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MGC module design in my own project?
Its repository states no licence, so its author keeps all rights: ask 0x007E before reusing the design.