2 layers76.2 × 50.8 mm
2 layers99.8 × 90.3 mm
Cjb
0x007E/cjbColor JukeBox
- Size
- 99.8 × 90.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 123
- Nets
- 110
- Pads
- 445
- Tracks, vias
- 345, 277
- Pours
- 21
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 20 Feb 2026
- Updated
- 10 Apr 2026
Overview
Cjb is an open-source printed circuit board by 0x007E, from the 0x007E/cjb repository on GitHub. It is a 2-layer board of 99.8 × 90.3 mm with 123 parts on 110 nets, routed with 345 tracks and 277 vias.
It is built around the FT230XS-R, PAM8406DR and LM1117DT-3.3, with the PCM5100APW and AO3400A among its other parts. Its parts include 47 capacitors, 29 resistors, 15 diodes, 7 connectors and 6 ICs. It belongs with the ESP32 boards of this library.
Main components
5
FT230XS-R
SSOP-16-150mil-40℃~+85℃ 125uA 3.3V~5V 8mA USB 2.0 USB to UART SSOP-16-150mil USB Converters ROHSFTDIUSB Converters
PAM8406DR
SOIC-16-40℃~+85℃ -70dB 0.11% 10mA 2 Single-Ended Inputs 2-Channel 2.5V~5.5V 5Wx2@2Ω 90% 90dB Automatic mute/no-noise switch、Enable/disable function、Filterless architecture、Configurable output topology Class AB、Class D SOIC-16 Audio Amplifiers ROHSDiodes IncorporatedAudio Amplifiers
LM1117DT-3.3
TO-2520℃~+125℃@(Tj) 1 1.2V@(800mA) 15V 3.3V 5mA 75dB@(120Hz) 800mA Fixed Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive TO-252 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
PCM5100APW
TSSOP-20-40℃~+130℃ 1.8V~3.3V 2 32 384kHz 50MHz Audio Decoder I2S TSSOP-20 ADCs/DACs - Special Purpose ROHSTexas InstrumentsADCs/DACs - Special Purpose
AO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
Parts
123| Qty | Value | Footprint | References |
|---|---|---|---|
| 26 | 100n | Capacitor_SMD:C_1206_3216Metric | C15, C20, C21, C23, C26, C27, C29, C30, C31, C32, C33, C34, C35, C36, C37, C38 +10 |
| 12 | APA102 | LED_SMD:LED_RGB_5050-6 | D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15 |
| 11 | 100u | Capacitor_SMD:CP_Elec_6.3x5.2 | C1, C2, C3, C4, C14, C18, C19, C24, C25, C28, C42 |
| 7 | 10k | Resistor_SMD:R_1206_3216Metric | R13, R15, R16, R18, R19, R21, R22 |
| 4 | 10u | Capacitor_SMD:CP_Elec_5x5.3 | C13, C22, C45, C46 |
| 4 | 1k | Resistor_SMD:R_1206_3216Metric | R9, R10, R26, R27 |
| 3 | 270 | Resistor_SMD:R_1206_3216Metric | R5, R7, R23 |
| 3 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5, J6, J7 |
| 3 | LED | LED_SMD:LED_1206_3216Metric | D1, D2, D3 |
| 3 | NetTie_2 | NetTie:NetTie-2_SMD_Pad2.0mm | NT1, NT2, NT3 |
| 2 | 0 | Resistor_SMD:R_1206_3216Metric | R2, R4 |
| 2 | 2k2 | Resistor_SMD:R_1206_3216Metric | R14, R20 |
| 2 | 2n2 | Capacitor_SMD:C_1206_3216Metric | C10, C11 |
| 2 | 2u2 | Capacitor_SMD:C_1206_3216Metric | C12, C16 |
| 2 | 470 | Resistor_SMD:R_1206_3216Metric | R24, R25 |
| 2 | 5k1 | Resistor_SMD:R_1206_3216Metric | R1, R3 |
| 2 | Conn_01x06_Socket | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J3, J4 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2 |
| 2 | SW_MEC_5E | PTS530:SW_PTS530_GK055_SMTR_LFS | SW2, SW3 |
| 2 | Speaker | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | LS1, LS2 |
| 2 | n.B. | Resistor_SMD:R_1206_3216Metric | R11, R12 |
| 1 | 0R025 | Resistor_SMD:R_2010_5025Metric | R8 |
| 1 | 100 | Resistor_SMD:R_1206_3216Metric | R29 |
| 1 | 10n | Capacitor_SMD:C_1206_3216Metric | C17 |
| 1 | 10u | Capacitor_SMD:C_1206_3216Metric | C8 |
| 1 | 1k8 | Resistor_SMD:R_1206_3216Metric | R28 |
| 1 | 330k | Resistor_SMD:R_1206_3216Metric | R6 |
| 1 | 3A | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | 4k7 | Resistor_SMD:R_1206_3216Metric | R17 |
| 1 | 70Ohm/100MHz | Inductor_SMD:L_1206_3216Metric | FB1 |
| 1 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | BIN | Symbol:WEEE-Logo_4.2x6mm_SilkScreen | FID2 |
| 1 | BUK7880 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | Q1 |
| 1 | ESD | Symbol:ESD-Logo_6.6x6mm_SilkScreen | FID4 |
| 1 | ESP32-WROOM-32UE-R2 | RF_Module:ESP32-WROOM-32U | U4 |
| 1 | FT230XS | Package_SO:SSOP-16_3.9x4.9mm_P0.635mm | U2 |
| 1 | INA181 | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | LM1117DT-3.3 | Package_TO_SOT_SMD:TO-252-3_TabPin2 | U1 |
| 1 | Micro_SD_Card | Connector_Card:microSD_HC_Molex_47219-2001 | J2 |
| 1 | OH | Symbol:OSHW-Logo2_7.3x6mm_SilkScreen | FID3 |
| 1 | PAM8406D | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U5 |
| 1 | PCM5100A | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U6 |
| 1 | QR | Images:QR_0x007e_small | FID1 |
| 1 | SW_SPDT | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | SW1 |
| 1 | SolderJumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm_NumberLabels | JP1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4110 | J1 |
Questions
How big is the Cjb PCB?
It measures 99.8 × 90.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Cjb use?
123 parts, built around the FT230XS-R, PAM8406DR, LM1117DT-3.3 and PCM5100APW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Cjb KiCad files?
From the 0x007E/cjb repository on GitHub, at the commit this page was made from: the board is pcb/CJB.kicad_pcb and its schematic pcb/CJB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Cjb design in my own project?
Its repository states no licence, so its author keeps all rights: ask 0x007E before reusing the design.
Similar boards
- 2 layers43.8 × 31.8 mm
- 2 layers92.7 × 62.2 mm
- 2 layers100 × 100 mm
Mod1base mod1base
PCBench/PCBench
resolution = [0.5, 0.5] pcbfolder = '../PCBs/' pcbnames = ["1Bitsy1bitsy"] iters = 30 env = PCBRoutingEnv(resolution=resolution, pcbfolder=pcbfolder, pcbnames=pcbnames) obs, info = env.reset() for in range(iters): act =…
187 parts21MIT - 2 layers100 × 90 mm
- 2 layers209.2 × 82 mm
- 4 layers95.2 × 112.5 mm
- 4 layers88 × 60 mm
