2 layers102 × 66 mm
2 layers107 × 100 mm
Techweekpcb
0804robot/mazerunnerTech Week Maze Runner
- Size
- 107 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 26
- Nets
- 44
- Pads
- 97
- Tracks, vias
- 115, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 25 Sep 2022
- Updated
- 4 Oct 2022
Overview
Techweekpcb is an open-source printed circuit board by 0804robot, from the 0804robot/mazerunner repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 107 × 100 mm with 26 parts on 44 nets, routed with 115 tracks and 0 vias.
It is built around the ESP32-S and FQP27P06. Its parts include 9 resistors, 5 ICs, 3 connectors, 2 capacitors and 2 diodes. It belongs with the ESP32 boards of this library.
Main components
2README
README.mdmazerunner
Tech Week Maze Runner
Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_2.5mm | H1, H2, H3, H4 |
| 3 | 1k | UserLibrary:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R4, R6 |
| 3 | 2k | UserLibrary:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R5, R7 |
| 3 | Ultrasonic | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | U3, U4, U5 |
| 2 | 100 | UserLibrary:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R16, R17 |
| 2 | 10uF | UserLibrary:CP_Radial_D5.0mm_P2.50mm | C1, C2 |
| 2 | LED | LED_THT:LED_D5.0mm | D3, D4 |
| 2 | Screw_Terminal_01x02 | UserLibrary:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1, J5 |
| 1 | 1.1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | Conn_01x07_Male | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J2 |
| 1 | ESP32-S | UserLibrary:ESP32-S | U1 |
| 1 | FQP27P06 | UserLibrary:TO-220-3_Vertical | Q1 |
| 1 | LM1084-5.0 | UserLibrary:TO-220-3_Vertical | U2 |
Questions
How big is the Techweekpcb PCB?
It measures 107 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Techweekpcb use?
26 parts, built around the ESP32-S and FQP27P06. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Techweekpcb KiCad files?
From the 0804robot/mazerunner repository on GitHub, at the commit this page was made from: the board is techweekpcb/techweekpcb.kicad_pcb and its schematic techweekpcb/drive.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Techweekpcb design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers
- 2 layers44.8 × 49.8 mm
ControlAVR155
radioelf/Mod.-Harman-Kardon-AVR-155-Mqtt-bluetooth
Modificación amplificador Harman Kardon AVR 155, con un ESP32 para poder controlar desde MQTT y usar el modulo UDA1334a para poder reproducir música a través de bluetooth
32 parts2 - 2 layers89.6 × 59.7 mm
- 2 layers30 × 64 mm
Radio Bottom
mattronix/battery-board
KiCad hardware project for the battery-to-radio interface of an AN/PRC‑152(A) reproduction radio. It contains two small PCBs that mate through spring‑loaded pogo‑pin contacts, plus a shared custom KiCad footprint…
12 parts8CERN-OHL-W-2.0 - 2 layers70 × 50 mm
Led light project
mattwach/portable_led_lamp
Contains firmware, schematics and 3D models for a LED lamp that can accept a wide range of voltages.
20 parts7GPL-3.0 - 2 layers66 × 53.3 mm
ESP32ScoringDevice PCB THT Rev1.2
pietwauters/esp32_scoring_device_hardware
Hardware files for the scoring device
32 parts7GPL-3.0 - 2 layers65 × 56 mm
XDoor
xHain-hackspace/xDoorPiHat
Schematics and Boardfiles for PiHat that opens and closes the xDoor
36 parts3