2 layers107 × 100 mm
2 layers102 × 66 mm
DOJO PCB
0804robot/DOJO_PCBPCB for DOJO
- Size
- 102 × 66 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 46
- Pads
- 105
- Tracks, vias
- 152, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 8 Oct 2022
- Updated
- 19 Nov 2022
Overview
DOJO PCB is an open-source printed circuit board by 0804robot, from the 0804robot/DOJO_PCB repository on GitHub. It is a 2-layer board of 102 × 66 mm with 25 parts on 46 nets, routed with 152 tracks and 0 vias.
It is built around the ESP32-S and FQP27P06. Its parts include 8 resistors, 6 ICs, 6 connectors, 2 capacitors and 1 diode. It belongs with the ESP32 boards of this library.
Main components
2Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 1k | UserLibrary:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R4, R8 |
| 3 | Ultrasonic | UserLibrary:PinHeader_1x04_P2.54mm_Vertical | U3, U5, U6 |
| 2 | 10uF | UserLibrary:CP_Radial_D5.0mm_P2.50mm | C1, C2 |
| 2 | 2k | UserLibrary:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R5 |
| 2 | Conn_01x04_Male | UserLibrary:PinHeader_1x04_P2.54mm_Vertical | J6, J7 |
| 2 | Screw_Terminal_01x02 | UserLibrary:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1, J2 |
| 1 | 1.1k | UserLibrary:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 1k | UserLibrary:R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R6 |
| 1 | 2k | UserLibrary:R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R7 |
| 1 | Conn_01x02_Male | UserLibrary:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | Conn_01x03_Male | UserLibrary:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | J4 |
| 1 | ESP32-S | UserLibrary:ESP32-S | U1 |
| 1 | FQP27P06 | UserLibrary:TO-220-3_Vertical | Q1 |
| 1 | IR_5_channel_reflective_sensor | UserLibrary:PinHeader_1x07_P2.54mm_Vertical | U4 |
| 1 | LED | UserLibrary:PinHeader_1x02_P2.54mm_Vertical | D1 |
| 1 | LM1084-5.0 | UserLibrary:TO-220-3_Vertical | U2 |
| 1 | Motor_Servo | UserLibrary:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | M1 |
Questions
How big is the DOJO PCB PCB?
It measures 102 × 66 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DOJO PCB use?
25 parts, built around the ESP32-S and FQP27P06. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DOJO PCB KiCad files?
From the 0804robot/DOJO_PCB repository on GitHub, at the commit this page was made from: the board is DOJO_PCB.kicad_pcb and its schematic DOJO_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DOJO PCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask 0804robot before reusing the design.
Similar boards
- 2 layers
- 2 layers44.8 × 49.8 mm
ControlAVR155
radioelf/Mod.-Harman-Kardon-AVR-155-Mqtt-bluetooth
Modificación amplificador Harman Kardon AVR 155, con un ESP32 para poder controlar desde MQTT y usar el modulo UDA1334a para poder reproducir música a través de bluetooth
32 parts2 - 2 layers89.6 × 59.7 mm
- 2 layers30 × 64 mm
Radio Bottom
mattronix/battery-board
KiCad hardware project for the battery-to-radio interface of an AN/PRC‑152(A) reproduction radio. It contains two small PCBs that mate through spring‑loaded pogo‑pin contacts, plus a shared custom KiCad footprint…
12 parts8CERN-OHL-W-2.0 - 2 layers70 × 50 mm
Led light project
mattwach/portable_led_lamp
Contains firmware, schematics and 3D models for a LED lamp that can accept a wide range of voltages.
20 parts7GPL-3.0 - 2 layers66 × 53.3 mm
ESP32ScoringDevice PCB THT Rev1.2
pietwauters/esp32_scoring_device_hardware
Hardware files for the scoring device
32 parts7GPL-3.0 - 2 layers65 × 56 mm
XDoor
xHain-hackspace/xDoorPiHat
Schematics and Boardfiles for PiHat that opens and closes the xDoor
36 parts3