Skip to the content
12

S210

Yangzhou Yangjie Electronic TechnologyExtended

-55℃~+150℃ 1 Independent 100V 100uA@5V 2A 40A 850mV@2A SOD-123 Schottky Diodes ROHS

Part id
yangjie/S210
Category
Schottky Diodes
Package
SOD-123
Pins
2
In stock
5,945 at JLCPCB (C2942846)
Used on
4 open-source boards

Overview

The S210 is a schottky Diode made by Yangzhou Yangjie Electronic Technology in a SOD-123 package with 2 pins. -55℃~+150℃ 1 Independent 100V 100uA@5V 2A 40A 850mV@2A SOD-123 Schottky Diodes ROHS.

PCBKit's library has its KiCad symbol (Device:D_Schottky, from KiCad's library) and its footprint (Diode_SMD:D_SOD-123, from KiCad's library), ready for a KiCad board. 5,945 are in stock at JLCPCB (part C2942846). 4 open-source boards in 4 repositories on GitHub use it.

Symbol

Device:D_SchottkyFrom KiCad's library

Footprint

12
Diode_SMD:D_SOD-123From KiCad's library

Pinout

2
The pins of the S210
PinNameType
1KPassive
2APassive

Open-source boards using it

4
  • 2 layers80 × 52.8 mmLemon F334-K, the printed circuit board in 3D

    Lemon F334-K

    NickNifontov/CipollinoRTOS

    Sin wave invertor (HRPWM, 35kHz). Replacement for TL/EG PWM .

    176 parts3
  • 4 layers90 × 53.5 mmBuck boost solar, the printed circuit board in 3D

    Buck boost solar

    JonasCz/lt8491-charger-boards

    Boosting high-voltage MPPT solar charger based on LT8491

    129 parts2
  • 2 layers110.3 × 110.3 mmH Bridge PCB, the printed circuit board in 3D

    H Bridge PCB

    reinto1234/H_Bridge_PCB

    The project consists of two main components: 1. HBridgePCBDesign — KiCad PCB layout and schematic. 2. HBridgePCBCode — Firmware for the ESP32 controller.

    124 parts
  • 2 layers70 × 100 mmEKDR StepAx1, the printed circuit board in 3D

    EKDR StepAx1

    Konstantin-Dudersky/plc-modules

    После открыть файл в Inkscape и изменить размер страницы

    75 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the S210?

Yes. The symbol is Device:D_Schottky and the footprint Diode_SMD:D_SOD-123, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the S210?

SOD-123, with 2 pins. Its footprint is drawn on this page.

Where is the S210 datasheet?

Yangzhou Yangjie Electronic Technology publishes it: the Datasheet link on this page opens it.

Where can I order the S210?

JLCPCB lists it as part C2942846, with 5,945 in stock; the sellers' links on this page open their listings.

What can replace the S210?

Parts like it in the library: the DSK210 by FUXINSEMI, the MBR2H100SF by onsemi, the DSK320 by FUXINSEMI and the DSS210 by FUXINSEMI. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the S210?

4 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.