Skip to the content
HDR-TH_2P-P2.54-L5.1-W2.5

JUMPER2

Würth ElektronikExtended

HDR-TH-2P-2.54mm New Arrivals ROHS

Part id
wurth/JUMPER2
Category
Uncategorised
Package
HDR-TH_2P-P2.54-L5.1-W2.5
Pins
2
In stock
0 at JLCPCB (C2940092)
Used on
65 open-source boards

Overview

The JUMPER2 is an uncategorised made by Würth Elektronik in a HDR-TH_2P-P2.54-L5.1-W2.5 package with 2 pins. HDR-TH-2P-2.54mm New Arrivals ROHS.

PCBKit's library has its KiCad symbol (freetronics_schematic:JUMPER2, from Freetronics), ready for a KiCad board. JLCPCB lists it (part C2940092). 65 open-source boards in 29 repositories on GitHub use it.

Symbol

12
freetronics_schematic:JUMPER2From Freetronics

Footprint

The library has no footprint for this part yet.

Pinout

2
The pins of the JUMPER2
PinNameType
11Passive
22Passive

Open-source boards using it

65See all 65
  • 2 layers49.8 × 24.3 mmFSP Display5S, the printed circuit board in 3D

    FSP Display5S

    MobiFlight/mobiflight-panels

    A repository with open source panel designs for flight simulation.

    13 parts126GPL-3.0
  • 6 layers107 × 78 mmZipper, the printed circuit board in 3D

    Zipper

    myriadrf/reference-development-kit

    The Myriad-RF Reference Hardware design files and firmware

    945 parts49
  • 4 layers65.9 × 52.9 mmEX CSB1, the printed circuit board in 3D

    EX CSB1

    DCC-EX/EX-CSB1

    Open source EX-CSB1 CommandStation / Booster

    103 parts13
  • 4 layers65.9 × 52.9 mmMotor shield, the printed circuit board in 3D

    Motor shield

    DCC-EX/EX-MotorShield8874

    Design files for the open source 5A Motor Shield

    114 parts12
  • 2 layers134.5 × 83.9 mmLC Meter, the printed circuit board in 3D

    LC Meter

    TeknoTrek/LC-Meter

    This repository is part of the Teknotrek YouTube channel, featuring the DIY LC Meter project. It includes KiCad files, schematics, PCB layouts, and Arduino firmware.

    27 parts9
  • 4 layers65.9 × 52.7 mmMotor shield, the printed circuit board in 3D

    Motor shield

    DCC-EX/EX-Hardware

    Open Source hardware projects developed by the DCC-EX Team

    123 parts7CERN-OHL-W-2.0
  • 2 layers54.4 × 26 mmUSBtiny ISP Programmer ATtiny44, the printed circuit board in 3D

    USBtiny ISP Programmer ATtiny44

    abdontroche/FabISP-USBtinyISP-ATtiny44

    This is a version of the Fab-ISP programmer that is used in the Fab Academy course around the world

    16 parts6MIT
  • 2 layers90 × 70 mmSi5351-Signal Generator, the printed circuit board in 3D

    Si5351-Signal Generator

    TeknoTrek/Si5351-Clock-Generator-for-Arduino-Projects

    Si5351 Clock Generator for Arduino Projects Generate precise clock signals using the Si5351 module and Arduino Nano. Features: Stable clock outputs with Si5351. Rotary encoder for easy frequency adjustment.

    16 parts4

Questions

Is there a KiCad symbol and footprint for the JUMPER2?

Yes. The symbol is freetronics_schematic:JUMPER2, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the JUMPER2?

HDR-TH_2P-P2.54-L5.1-W2.5, with 2 pins.

Where can I order the JUMPER2?

JLCPCB lists it as part C2940092, with 0 in stock; the sellers' links on this page open their listings.

Which open-source boards use the JUMPER2?

65 boards in 29 repositories on GitHub; the most starred are listed on this page, with their KiCad files.