

Overview
The CH552E is a microcontroller made by WCH (Nanjing Qinheng Microelectronics) in a MSOP-10 package with 10 pins. 16KB 24MHz 3.3V~5V 51 Family 8bit FLASH MSOP-10 Microcontrollers (MCU/MPU/SOC) ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:CH552E, from EasyEDA) and its footprint (Package_SO:MSOP-10_3x3mm_P0.5mm, from KiCad's library), ready for a KiCad board. 9,419 are in stock at JLCPCB (part C967938). 13 open-source boards in 9 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
13- Supply, least
- 3.7 V · VCC, minimum for 5 V operation, V33 capacitor only · p. 49
- Supply, most
- 5.5 V · VCC, maximum for 5 V operation, V33 capacitor only · p. 49
- Supply, least
- 3 V · VCC, minimum with V33 tied to VCC and USB enabled · p. 49
- Supply, most
- 3.6 V · VCC, maximum with V33 tied to VCC and USB enabled · p. 49
- Supply, least
- 2.8 V · VCC, minimum with V33 tied to VCC and USB disabled · p. 49
- Supply, absolute maximum
- 5.8 V · VCC, absolute maximum · p. 49
- Works from
- -40 °C · Operating ambient temperature, min · p. 49
- Works up to
- 85 °C · Operating ambient temperature, max · p. 49
- Takes working
- 11 mA · Typical total supply current, Fsys=24MHz, VCC=5V, TA=25℃ · p. 49
- Takes working
- 5 mA · Typical total supply current, Fsys=12MHz, VCC=V33=3.3V, TA=25℃ · p. 49
- Takes asleep
- 100 µA · Typical sleep total supply current, VCC=5V, TA=25℃ · p. 49
- Takes asleep
- 8 µA · Typical full sleep current, VCC=V33=5V, external crystal, LDO disabled · p. 49
- Takes asleep
- 70 µA · Typical sleep total supply current, VCC=V33=3.3V, TA=25℃ · p. 49
What it is and has
11- Core
- Enhanced E8051, compatible with MCS51 instruction set · p. 1
- Maximum system clock
- 24MHz · p. 1
- Program ROM
- 16K · p. 1
- Internal iRAM
- 256 bytes · p. 1
- Internal xRAM
- 1K bytes, DMA supported · p. 1
- Timers
- 3 groups, signal capture and PWM · p. 1
- UART
- 2 · p. 1
- ADC
- Integrated analog-to-digital conversion · p. 1
- Touch sensing
- Capacitive touch-key detection · p. 1
- SPI
- Integrated SPI · p. 1
- USB
- Device controller and full-speed transceiver · p. 1
Specifications
29| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| 工作时的环境温度 TA | min -40 · max 85 ℃ | 49 | |
| 储存时的环境温度 TS | min -55 · max 125 ℃ | 49 | |
| 电源电压 VCC | VCC 接电源,GND 接地 | min -0.4 · max 5.8 V | 49 |
| 除 P3.6/P3.7 之外其它输入或者输出引脚上的电压 VIO | min -0.4 V | 49 | |
| P3.6/P3.7 输入或者输出引脚上的电压 VIOU | min -0.4 V | 49 | |
| VCC 引脚电源电压 VCC5 | TA=25℃,V33 仅外接电容 | min 3.7 · typ 5 · max 5.5 V | 49 |
| 内部 USB 电源调整器输出电压 V33 | TA=25℃,VCC=5V,Fsys=6MHz | min 3.14 · typ 3.27 · max 3.4 V | 49 |
| 工作时的总电源电流 ICC24M5 | TA=25℃,VCC=5V,Fsys=24MHz | min 8 · typ 11 mA | 49 |
| 工作时的总电源电流 ICC6M5 | TA=25℃,VCC=5V,Fsys=6MHz | min 4 · typ 6 mA | 49 |
| 工作时的总电源电流 ICC750K5 | TA=25℃,VCC=5V,Fsys=750KHz | min 2 · typ 3 mA | 49 |
| 睡眠后的总电源电流 ISLP5 | TA=25℃,VCC=5V | typ 0.1 · max 0.2 mA | 49 |
| 完全睡眠后的总电源电流 ISLP5L | TA=25℃,VCC=V33=5V,且选用外部晶体时钟,且 bLDO3V3_OFF=1 关闭 LDO | typ 0.008 · max 0.025 mA | 49 |
| ADC 模数转换模块工作电流 IADC5 | TA=25℃,VCC=5V,Fsys=6MHz | typ 200 · max 800 uA | 49 |
| 电压比较器模块工作电流 ICMP5 | TA=25℃,VCC=5V,Fsys=6MHz | typ 100 · max 500 uA | 49 |
| 触摸按键电容检测模块工作电流 ITKEY5 | TA=25℃,VCC=5V,Fsys=6MHz | typ 150 · max 250 uA | 49 |
| 低电平输入电压 VIL5 | TA=25℃,VCC=5V,Fsys=6MHz | min -0.4 · max 1.2 V | 49 |
| 高电平输入电压 VIH5 | TA=25℃,VCC=5V,Fsys=6MHz | min 2.4 V | 49 |
| 低电平输出电压 VOL5 | TA=25℃,VCC=5V,Fsys=6MHz,12mA 吸入电流 | max 0.4 V | 49 |
| 无上拉输入端的输入电流 IIN | TA=25℃,VCC=5V,Fsys=6MHz | min -5 · typ 0 · max 5 uA | 49 |
| 带下拉电阻输入端的输入电流 IDN5 | TA=25℃,VCC=5V,Fsys=6MHz | min -35 · typ -70 · max -140 uA | 49 |
| 带上拉电阻输入端的输入电流 IUP5 | TA=25℃,VCC=5V,Fsys=6MHz | min 35 · typ 70 · max 140 uA | 49 |
| 带上拉输入端由低向高翻转时的输入电流 IUP5X | TA=25℃,VCC=5V,Fsys=6MHz | min 250 · typ 400 · max 600 uA | 49 |
| 电源上电复位的门限电压 Vpot | TA=25℃,Fsys=6MHz | min 2.1 · typ 2.3 · max 2.5 V | 49 |
| VCC 引脚电源电压 VCC3 | TA=25℃,V33 短接到 VCC,开启 USB | min 3 · typ 3.3 · max 3.6 V | 49 |
| VCC 引脚电源电压 VCC3 | TA=25℃,V33 短接到 VCC,关闭 USB | min 2.8 · typ 3.3 · max 3.6 V | 49 |
| 工作时的总电源电流 ICC12M3 | TA=25℃,VCC=V33=3.3V,Fsys=12MHz | min 3 · typ 5 mA | 49 |
| 工作时的总电源电流 ICC6M3 | TA=25℃,VCC=V33=3.3V,Fsys=6MHz | min 2 · typ 4 mA | 49 |
| 工作时的总电源电流 ICC750K3 | TA=25℃,VCC=V33=3.3V,Fsys=750KHz | min 1 · typ 2 mA | 49 |
| 睡眠后的总电源电流 ISLP3 | TA=25℃,VCC=V33=3.3V | typ 0.07 · max 0.15 mA | 49 |
Parameters
14- ADC (Bit)
- 8bit
- CPU Core
- 51 Series
- CPU Maximum Speed
- 24MHz
- Core Size
- 8 Bit
- Current - Supply
- 11mA
- Features
- Integrated LDO
- Operating Temperature
- -40℃~+85℃
- Oscillator Type
- Built-in+External
- Program Memory Type
- FLASH
- Program Storage Size
- 16KB
- RAM Size
- 1.25KB
- Standby Current
- 100uA
- Voltage - Supply
- 2.8V~5.5V
- Voltage - Supply(Absolute Max)
- 5.8V
Order codes
1- CH552ELCSC C967938
Pinout
10| Pin | Name | Type |
|---|---|---|
| 1 | P1.4/T2_/CAP1_/SCS/TIN2/UCC1/AIN1 | Unspecified |
| 2 | P1.5/MOSI/PWM1/TIN3/UCC2/AIN2 | Unspecified |
| 3 | P1.6/MISO/RXD1/TIN4 | Unspecified |
| 4 | P1.7/SCK/TXD1/TIN5 | Unspecified |
| 5 | RST/T2EX_/CAP2_ | Unspecified |
| 6 | P3.6/UDP | Unspecified |
| 7 | P3.7/UDM | Unspecified |
| 8 | GND/VSS | Unspecified |
| 9 | VCC/VDD | Unspecified |
| 10 | V33 | Unspecified |
Open-source boards using it
All 13- 2 layers19 × 19 mm

- 2 layers88.9 × 50.8 mm

DogeKey2
acamilo/pcb-artwork-project
Collection of graphical PCBs containing memes, logos of youtube channels i watch, among other things.
23 parts1 - 2 layers32.9 × 49.6 mm

- 2 layers26.8 × 10 mm

- 2 layers83 × 58 mm

Tk1
kr-Eliza/tkey-open-hardware-reproduction
Reproducing the Tillitis TKey open hardware security key: 2-layer hand-solderable PCB, lab assembly and bring-up, Voltera prototype, SBOM
67 partsCERN-OHL-S-2.0 - 2 layers88 × 92 mm

- 2 layers

- 2 layers49 × 35.6 mm

Show this part on your page
<iframe src="https://pcbkit.io/embed/parts/wch/CH552E" title="CH552E in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe><img src="https://pcbkit.io/embed/parts/wch/CH552E.jpg" alt="CH552E" width="1200" height="900">[](https://pcbkit.io/parts/wch/CH552E)Questions
Is there a KiCad symbol and footprint for the CH552E?
Yes. The symbol is EasyEDA_Cloud:CH552E and the footprint Package_SO:MSOP-10_3x3mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the CH552E?
MSOP-10, with 10 pins. Its footprint is drawn on this page.
Where is the CH552E datasheet?
WCH (Nanjing Qinheng Microelectronics) publishes it: the Datasheet link on this page opens it.
Where can I order the CH552E?
JLCPCB lists it as part C967938, with 9,419 in stock; the sellers' links on this page open their listings.
What can replace the CH552E?
Parts like it in the library: the CH554E by WCH (Nanjing Qinheng Microelectronics), the ML51BB9AE by Nuvoton Tech, the MS51BA9AE by Nuvoton Tech and the BS84B04C-10MSOP by Holtek Semicon. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the CH552E?
13 boards in 9 repositories on GitHub; the most starred are listed on this page, with their KiCad files.
Parts like it
8CH554E
MSOP-1016KB 24MHz 3.3V~5V 51 Family 8bit FLASH MSOP-10 Microcontrollers (MCU/MPU/SOC) ROHSWCH (Nanjing Qinheng Microelectronics)Microcontrollers (MCU/MPU/SOC)ML51BB9AE
MSOP-10-40℃~+105℃ 1.8V~5.5V 12bit 16KB 1KB 24MHz 51 Series 7 8 Bit Built-in FLASH MSOP-10 Microcontrollers (MCU/MPU/SOC) ROHSNuvoton TechMicrocontrollers (MCU/MPU/SOC)MS51BA9AE
MSOP-10(3x3)-40℃~+105℃ 1KB 2.4V~5.5V 24MHz 51 Series 8 8 Bit 8KB Built-in FLASH MSOP-10(3x3) Microcontrollers (MCU/MPU/SOC) ROHSNuvoton TechMicrocontrollers (MCU/MPU/SOC)BS84B04C-10MSOP
MSOP-10Microcontrollers (MCU/MPU/SOC)Holtek SemiconHT48R002-10MSOP
MSOP-10Microcontrollers (MCU/MPU/SOC)Holtek SemiconHT66F2030-10MSOP
MSOP-10Microcontrollers (MCU/MPU/SOC)Holtek SemiconHT66F2040-10MSOP
MSOP-10Microcontrollers (MCU/MPU/SOC)Holtek SemiconHT66F2050-10MSOP
MSOP-10Microcontrollers (MCU/MPU/SOC)Holtek Semicon