Skip to the content
1234

TSOP75338TT

Vishay IntertechnologyExtended

-25℃~+85℃ 10mW 2.5V~5.5V 24m 350uA 38kHz ±50° SMD-4P,6.8x3mm Infrared Remote Receiver (IRM) ROHS

Part id
vishay/TSOP75338TT
Category
Infrared Remote Receiver (IRM)
Package
SMD-4P,6.8x3mm
Pins
4
In stock
45 at JLCPCB (C499550)
Used on
8 open-source boards

Overview

The TSOP75338TT is an infrared Remote Receiver made by Vishay Intertechnology in a SMD-4P,6.8x3mm package with 4 pins. -25℃~+85℃ 10mW 2.5V~5.5V 24m 350uA 38kHz ±50° SMD-4P,6.8x3mm Infrared Remote Receiver (IRM) ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:TSOP75456TR, from EasyEDA) and its footprint (EasyEDA_Cloud:SENSOR-SMD_4P-L6.8-W3.0-P1.27_TSOP75438TT, from EasyEDA), ready for a KiCad board. 45 are in stock at JLCPCB (part C499550). 8 open-source boards in 6 repositories on GitHub use it.

Symbol

4GND3OUT2+VS1GND
EasyEDA_Cloud:TSOP75456TRFrom EasyEDA

Footprint

1234
EasyEDA_Cloud:SENSOR-SMD_4P-L6.8-W3.0-P1.27_TSOP75438TTFrom EasyEDA

From the datasheet

8
Supply, least
2.5 V · VS, recommended operating min · p. 2
Supply, most
5.5 V · VS, recommended operating max · p. 2
Supply, absolute maximum
6 V · VS, absolute max · p. 2
Works from
-25 °C · Tamb, operating min · p. 2
Works up to
85 °C · Tamb, operating max · p. 2
Junction, hottest
100 °C · Tj, absolute max · p. 2
Takes working
350 µA · VS, typical supply current, Ev = 0, VS = 3.3 V · p. 2
A pin gives at most
5 mA · OUT, absolute max output current · p. 2

What it is and has

9
Integration
Photo detector and preamplifier in one package · p. 1
Data format compatibility
Short burst dataformats · p. 1
Ambient light immunity
Improved immunity against ambient light · p. 1
Viewing orientation
Side or top view · p. 1
Supply noise immunity
Insensitive to supply voltage ripple and noise · p. 1
Carrier frequency
38 kHz · p. 1
Package
Heimdall · p. 1
Dimensions
6.8 W x 3.0 H x 3.2 D mm · p. 1
Mounting
SMD · p. 1

Around it

2
res not specified
between +VS and VS; R1, series supply resistor recommended to reduce supply ripple for VS < 2.8 V. · p. 2
cap not specified
between VS and GND; C1, supply capacitor recommended to reduce supply ripple for VS < 2.8 V. · p. 2

Specifications

15
ParameterConditionsAs printedPage
Supply voltage VSmin -0.3 · max 6 V2
Supply current ISmax 3 mA2
Output voltage VOUpper limit: (VS + 0.3) Vmin -0.3 V2
Output current IOmax 5 mA2
Junction temperature Tjmax 100 °C2
Storage temperature range Tstgmin -25 · max 85 °C2
Operating temperature range Tambmin -25 · max 85 °C2
Power consumption PtotTamb ≤ 85 °Cmax 10 mW2
Supply voltage VSTamb = 25 °Cmin 2.5 · max 5.5 V2
Supply current ISDTamb = 25 °C, Ev = 0, VS = 3.3 Vmin 0.27 · typ 0.35 · max 0.45 mA2
Supply current ISHTamb = 25 °C, Ev = 40 klx, sunlighttyp 0.45 mA2
Transmission distance dTamb = 25 °C, Ev = 0, test signal see Fig. 1, IR diode TSAL6200, IF = 50 mAtyp 24 m2
Output voltage low VOSLTamb = 25 °C, IOSL = 0.5 mA, Ee = 0.7 mW/m2, test signal see Fig. 1max 100 mV2
Minimum irradiance Ee min.Tamb = 25 °C, pulse width tolerance: tpi - 5/fo < tpo < tpi + 6/fo, test signal see Fig. 1typ 0.12 · max 0.25 mW/m22
Maximum irradiance Ee max.Tamb = 25 °C, tpi - 5/fo < tpo < tpi + 6/fo, test signal see Fig. 1min 30 W/m22

Pins, by the datasheet

4
1 GND
Ground. · p. 1
2 VS
Supply voltage. · p. 1
3 OUT
Demodulated receiver output. · p. 2
4 GND
Ground. · p. 1

Open-source boards using it

8
  • 2 layers85.5 × 70 mmV0-Replay-26 PCB A, the printed circuit board in 3D

    V0-Replay-26 PCB A

    temporal-community/badge.temporal.io

    Open-source firmware, hardware files, docs, and community app registry for the Temporal Replay 2026 Badge.

    211 parts8MIT
  • 4 layers82 × 70 mmTemporal Badge CHARLIE, the printed circuit board in 3D

    Temporal Badge CHARLIE

    Architeuthis-Flux/Temporal-Replay-26-Badge

    Community firmware for the Temporal Replay 26 badge

    208 parts5Unlicense
  • 2 layers15.6 × 31.8 mmLed ring, the printed circuit board in 3D

    Led ring

    hzeller/DerKnopf

    Simple IR remote control of a volume knob

    33 parts5
  • 2 layers76.5 × 76.5 mmEdge AI Badge Main, the printed circuit board in 3D

    Edge AI Badge Main

    LyndLabs/Edge-AI-Badge

    Edge AI Foundation Badge - hardware files :)

    136 parts1
  • 2 layers20.8 × 9.1 mmIfm spark ir module, the printed circuit board in 3D

    Ifm spark ir module

    ALeggeUp/ifm-spark-ir-module

    IR module for IFM Spark Dev

    6 partsCC-BY-SA-4.0
  • 4 layers65 × 56.6 mmTemporal Badge, the printed circuit board in 3D

    Temporal Badge

    Architeuthis-Flux/Temporal-Replay-26-Badge

    Community firmware for the Temporal Replay 26 badge

    106 parts5Unlicense
  • 4 layers82 × 66 mmTemporal Badge BRAVO, the printed circuit board in 3D

    Temporal Badge BRAVO

    Architeuthis-Flux/Temporal-Replay-26-Badge

    Community firmware for the Temporal Replay 26 badge

    200 parts5Unlicense
  • 2 layers141 × 99.1 mmFace avant, the printed circuit board in 3D

    Face avant

    jmolas42/Cat-Feeder

    automatic cat feeder

    54 parts1

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TSOP75338TT?

Yes. The symbol is EasyEDA_Cloud:TSOP75456TR and the footprint EasyEDA_Cloud:SENSOR-SMD_4P-L6.8-W3.0-P1.27_TSOP75438TT, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TSOP75338TT?

SMD-4P,6.8x3mm, with 4 pins. Its footprint is drawn on this page.

Where is the TSOP75338TT datasheet?

Vishay Intertechnology publishes it: the Datasheet link on this page opens it.

Where can I order the TSOP75338TT?

JLCPCB lists it as part C499550, with 45 in stock; the sellers' links on this page open their listings.

What can replace the TSOP75338TT?

Parts like it in the library: the TSOP75438TT by Vishay Intertechnology, the TSOP75338WTT by Vishay Intertechnology, the TSOP75336TT by Vishay Intertechnology and the TSOP77236TT by Vishay Intertechnology. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TSOP75338TT?

8 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.