Skip to the content
2 layers20.8 × 9.1 mmIfm spark ir module, the printed circuit board in 3D

Ifm spark ir module

ALeggeUp/ifm-spark-ir-module

IR module for IFM Spark Dev

Size
20.8 × 9.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
6
Nets
4
Pads
13
Tracks, vias
20, 3
Pours
1
Routed
Yes
KiCad
KiCad 4
Created
26 May 2017
Updated
27 May 2017

Overview

Ifm spark ir module is an open-source printed circuit board by ALeggeUp, from the ALeggeUp/ifm-spark-ir-module repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 20.8 × 9.1 mm with 6 parts on 4 nets, routed with 20 tracks and 3 vias.

It is built around the TSOP75338TT. Its parts include 1 capacitor, 1 resistor and 1 connector.

Main components

1

README

README.md

IFM Spark IR Module

IR module for IFM Spark Dev

License

This work is licensed under the Creative Commons Attribution 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/ or send a letter to Creative Commons, PO Box 1866, Mountain View, CA 94042, USA.

Parts

6
QtyValueFootprintReferences
1CCapacitors_SMD:C_0805_HandSolderingC1
1CONN_01X03_MALEPin_Headers:Pin_Header_Straight_1x03_Pitch2.54mmJ1
1RResistors_SMD:R_0805_HandSolderingR1
1TSOP75338TTifm-ic-digital:TSOP75xIR1

The 4 most common of 6 parts.

Similar boards

  • 2 layers85.5 × 70 mmV0-Replay-26 PCB A, the printed circuit board in 3D

    V0-Replay-26 PCB A

    temporal-community/badge.temporal.io

    Open-source firmware, hardware files, docs, and community app registry for the Temporal Replay 2026 Badge.

    211 parts8MIT
  • 4 layers82 × 70 mmTemporal Badge CHARLIE, the printed circuit board in 3D

    Temporal Badge CHARLIE

    Architeuthis-Flux/Temporal-Replay-26-Badge

    Community firmware for the Temporal Replay 26 badge

    208 parts5Unlicense
  • 2 layers15.6 × 31.8 mmLed ring, the printed circuit board in 3D

    Led ring

    hzeller/DerKnopf

    Simple IR remote control of a volume knob

    33 parts5
  • 2 layers76.5 × 76.5 mmEdge AI Badge Main, the printed circuit board in 3D

    Edge AI Badge Main

    LyndLabs/Edge-AI-Badge

    Edge AI Foundation Badge - hardware files :)

    136 parts1
  • 2 layers141 × 99.1 mmFace avant, the printed circuit board in 3D

    Face avant

    jmolas42/Cat-Feeder

    automatic cat feeder

    54 parts1
  • 2 layers18.5 × 11.1 mmSwitch, the printed circuit board in 3D

    Switch

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    6 parts4.3kMIT
  • 2 layers14.6 × 33 mmBrain board SD Card 1, the printed circuit board in 3D

    Brain board SD Card 1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    6 parts1.2k
  • 2 layers9 × 9 mmDpoint, the printed circuit board in 3D

    Dpoint

    Jcparkyn/dpoint

    Open-source digital stylus using camera tracking and inertial measurements

    6 parts1.1kMIT

Questions

How big is the Ifm spark ir module PCB?

It measures 20.8 × 9.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Ifm spark ir module use?

6 parts, built around the TSOP75338TT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Ifm spark ir module KiCad files?

From the ALeggeUp/ifm-spark-ir-module repository on GitHub, at the commit this page was made from: the board is ifm-spark-ir-module.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Ifm spark ir module design in my own project?

Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).