Skip to the content
123

2N7002,215

Unknown maker

Part id
unknown/2N7002,215
Category
Uncategorised
Pins
3
Used on
31 open-source boards

Overview

The 2N7002,215 is an uncategorised made by Unknown maker with 3 pins.

PCBKit's library has its KiCad symbol (Transistor_FET:2N7002, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23, from KiCad's library), ready for a KiCad board. 31 open-source boards in 19 repositories on GitHub use it.

Symbol

123
Transistor_FET:2N7002From KiCad's library

Footprint

123
Package_TO_SOT_SMD:SOT-23From KiCad's library

Pinout

3
The pins of the 2N7002,215
PinNameType
1GInput
2SPassive
3DPassive

Open-source boards using it

31See all 31
  • 4 layers94.3 × 52.8 mmJetbot mini, the printed circuit board in 3D

    Jetbot mini

    NVIDIA-AI-IOT/jetbot_mini

    While developing the schematic and layout designs, I used some footprints from SnapEDA; in order to avoid dealing with licensing issues, I will not redistribute those files on this Github and instead link to where you…

    188 parts23
  • 2 layers178 × 711 mmMSAP-2 rev.A SMD, the printed circuit board in 3D

    MSAP-2 rev.A SMD

    mehrantsi/MSAP-2

    An 8-bit computer. Successor to MSAP-1

    658 parts13MIT
  • 4 layers100 × 90 mmNexus pear reva, the printed circuit board in 3D

    Nexus pear reva

    aminewe898/nexus-pear-reva

    NEXUS PEAR Rev A hardware design, schematics, PCB, manufacturing review exports and engineering documentation

    117 partsMIT
  • 2 layers290 × 280 mmCm5-guard A, the printed circuit board in 3D

    Cm5-guard A

    Brico-Hams/antenaSatCommrotor

    DUPLEXER 145 / 435 MHz — BNC — 25 W TARGET — REV A

    158 parts
  • 2 layers150 × 110 mmRF2M, the printed circuit board in 3D

    RF2M

    DD1SB/ARDF-TX

    Date: 2026-10-15. Engineering review only; unbuilt and unenergized. Open RF80.kicadpro, schematic and native PCB in KiCad10.0.6. Three primary PCBs and the separate VHF true-AM design are unchanged.

    358 partsMIT
  • 2 layers70 × 50 mmStorage failed, the printed circuit board in 3D

    Storage failed

    IgorCulafic/PCBSmith

    Open-source PCB design tools: KiCad workflows, automatic routing, design review and laser fabrication. Working toward plain-language circuit-to-board design.

    104 partsAGPL-3.0
  • 2 layers65 × 56 mmTeamc carrier, the printed circuit board in 3D

    Teamc carrier

    SantiBarrios2002/mtp-f26-teamc

    MTP F26 (UPC) Team C workspace: radio link budget, RFM69 firmware, protocol simulator

    94 parts
  • 4 layers65 × 56 mmArgus RPI HAT, the printed circuit board in 3D

    Argus RPI HAT

    shanebri/ESP32-Supervisor-GNSS-HAT

    Raspberry Pi HAT with an ESP32-C6 supervisor, u-blox MAX-M10S GNSS receiver, and HAT ID EEPROM.

    75 partsMIT

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the 2N7002,215?

Yes. The symbol is Transistor_FET:2N7002 and the footprint Package_TO_SOT_SMD:SOT-23, both drawn on this page. PCBKit places them on a board for you when you design with it.

What can replace the 2N7002,215?

Parts like it in the library: the XC6206P182MR by TECH PUBLIC, the JTD6206-3.3V by JTD, the BAT54S by TDSEMIC and the BC847A-TD by TDSEMIC. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the 2N7002,215?

31 boards in 19 repositories on GitHub; the most starred are listed on this page, with their KiCad files.