
Blue Wizard
wizarddata/Blue-Wizard-Mod
Bluetooth Controller for the Kinesis Advantage line of keyboards using the BlueMicro firmware
u-bloxExtended
OTA (Over-The-Air) upgrade、Encryption function、Mesh networking SMD,14x9.8mm Bluetooth Modules ROHS
The BMD-300-A-R is a bluetooth Module made by u-blox in a SMD,14x9.8mm package with 47 pins. OTA (Over-The-Air) upgrade、Encryption function、Mesh networking SMD,14x9.8mm Bluetooth Modules ROHS.
PCBKit's library has its KiCad symbol (dk_RF-Transceiver-Modules:BMD-300-A-R, from Digikey) and its footprint (bluetooth-module-bmd-300:Bluetooth_Module_BMD-300, from Antmicro), ready for a KiCad board. 4 are in stock at JLCPCB (part C6752754). 8 open-source boards in 7 repositories on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | GND | Power in |
| 2 | GND | Power in |
| 3 | GND | Power in |
| 4 | GND | Power in |
| 5 | GND | Power in |
| 6 | P0.25 | Input/output |
| 7 | P0.26 | Input/output |
| 8 | P0.27 | Input/output |
| 9 | P0.28 | Input/output |
| 10 | P0.29 | Input/output |
| 11 | P0.30 | Input/output |
| 12 | P0.31 | Input/output |
| 13 | P0.00 | Input/output |
| 14 | P0.01 | Input/output |
| 15 | P0.02 | Input/output |
| 16 | GND | Power in |
| 17 | VCC | Power in |
| 18 | GND | Power in |
| 19 | P0.03 | Input/output |
| 20 | PO.04 | Input/output |
| 21 | PO.05 | Input/output |
| 22 | PO.06 | Input/output |
| 23 | PO.07 | Input/output |
| 24 | PO.08 | Input/output |
| 25 | PO.09 | Input/output |
| 26 | PO.10 | Input/output |
| 27 | PO.11 | Input/output |
| 28 | PO.12 | Input/output |
| 29 | GND | Power in |
| 30 | GND | Power in |
| 31 | PO.13 | Input/output |
| 32 | PO.14 | Input/output |
| 33 | PO.15 | Input/output |
| 34 | PO.16 | Input/output |
| 35 | PO.17 | Input/output |
| 36 | PO.18 | Input/output |
| 37 | PO.19 | Input/output |
| 38 | PO.20 | Input/output |
| 39 | PO.21 | Input/output |
| 40 | PO.22 | Input/output |
| 41 | PO.23 | Input/output |
| 42 | PO.24 | Input/output |
| 43 | SWCLK | Input |
| 44 | SWDIO | Input/output |
| 45 | GND | Power in |
| 46 | GND | Power in |
| 47 | GND | Power in |

wizarddata/Blue-Wizard-Mod
Bluetooth Controller for the Kinesis Advantage line of keyboards using the BlueMicro firmware


TUDelft-SPC-Lab/spcl_midge_hardware
Hardware design files for the SPC lab MIDGE wearable devices for in-the-wild social data collection.




jayis1/hardware-design-lab
Full-cycle hardware device designs — each device in its own subfolder with architecture, schematics, PCB layout, and software stack
Yes. The symbol is dk_RF-Transceiver-Modules:BMD-300-A-R and the footprint bluetooth-module-bmd-300:Bluetooth_Module_BMD-300, both drawn on this page. PCBKit places them on a board for you when you design with it.
SMD,14x9.8mm, with 47 pins. Its footprint is drawn on this page.
u-blox publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C6752754, with 4 in stock; the sellers' links on this page open their listings.
8 boards in 7 repositories on GitHub; the most starred are listed on this page, with their KiCad files.