Skip to the content
12345

TPS72301DBV

Texas InstrumentsExtended

-40℃~+125℃@(Tj) 1 1.2V~10V 10V 200mA 200uA 500mV@(200mA) 60uVrms 65dB@(1kHz) Adjustable Negative Over Current Protection、Over Temperature Protection、Enable SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
ti/TPS72301DBV
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
SOT-23-5
Pins
5
In stock
31,544 at JLCPCB (C34678)
Used on
15 open-source boards

Overview

The TPS72301DBV is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Texas Instruments in a SOT-23-5 package with 5 pins. -40℃~+125℃@(Tj) 1 1.2V~10V 10V 200mA 200uA 500mV@(200mA) 60uVrms 65dB@(1kHz) Adjustable Negative Over Current Protection、Over Temperature Protection、Enable SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulator_Linear:TPS72301DBV, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 31,544 are in stock at JLCPCB (part C34678). 15 open-source boards in 11 repositories on GitHub use it.

Symbol

1GND2IN3EN4FB5OUT
Regulator_Linear:TPS72301DBVFrom KiCad's library

Footprint

12345
Package_TO_SOT_SMD:SOT-23-5From KiCad's library

From the datasheet

10
Supply, absolute maximum
11 V · IN, absolute maximum negative voltage magnitude · p. 4
Junction, hottest
150 °C · junction temperature, absolute max · p. 4
Takes working
130 µA · ground quiescent current, output enabled, IO = 0 mA, typical · p. 5
Takes asleep
100 nA · shutdown ground current, typical · p. 5
Gives
200 mA · continuous output current, max · p. 4
Current limit
550 mA · VO = 0.85 × VO(NOM), typical · p. 5
Feedback reference
1.186 V · feedback reference voltage, TJ = 25°C, typical · p. 5
Junction to air (DBV (SOT23))
206.9 K/W · junction-to-ambient thermal resistance · p. 4
Junction to board (DBV (SOT23))
35.9 K/W · junction-to-board thermal resistance · p. 4
Junction to case (DBV (SOT23))
120.5 K/W · junction-to-case top thermal resistance · p. 4

Open-source boards using it

15See all 15
  • 6 layers71.5 × 63.6 mmSensorboard, the printed circuit board in 3D

    Sensorboard

    CameraNexus/sitina1

    Open-source 35mm full-frame (36mm x 24mm) CCD mirror-less interchangable lens camera (MILC). The original goal of this project was to create a digital camera back to convert SLR cameras to DSLR cameras, but has since…

    426 parts82MIT
  • 4 layers129.5 × 52.3 mmPn wing prototype, the printed circuit board in 3D

    Pn wing prototype

    loxodes/phasenoise

    Prototype phase noise analyzer

    277 parts23MIT
  • 4 layers48.3 × 18.5 mm1GHZ DIFFERENTIAL PROBE, the printed circuit board in 3D

    1GHZ DIFFERENTIAL PROBE

    ckflight/1GHZ_DIFFERENTIAL_PROBE

    1 GHz Differential Probe Design

    75 parts6
  • 4 layers160 × 161.8 mmAcquisition board, the printed circuit board in 3D

    Acquisition board

    open-ephys/oe-acquisition-board-gen3

    3rd Generation Open Ephys USB Acquisition Board

    360 parts1
  • 4 layers85.5 × 110.8 mmGuitarPedalV4, the printed circuit board in 3D

    GuitarPedalV4

    OscarBazylewich/Phaser_and_Overdrive_Custom_Guitar_Pedal

    This project is a guitar pedal with analog circuits. It has a four-stage JFET phaser of the MXR Phase 90 type and a diode-clipping overdrive of the BOSS OD-1 type.

    103 partsGPL-3.0
  • 4 layers58 × 56 mmSequencing ltc2937, the printed circuit board in 3D

    Sequencing ltc2937

    loxodes/vna

    Under development open hardware microwave vector network analyzer

    153 parts205
  • 6 layersVna mm synth, the printed circuit board in 3D

    Vna mm synth

    loxodes/vna

    Under development open hardware microwave vector network analyzer

    435 parts205
  • 6 layers71.5 × 62.9 mmSensorboard backport, the printed circuit board in 3D

    Sensorboard backport

    CameraNexus/sitina1

    Open-source 35mm full-frame (36mm x 24mm) CCD mirror-less interchangable lens camera (MILC). The original goal of this project was to create a digital camera back to convert SLR cameras to DSLR cameras, but has since…

    391 parts82MIT

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TPS72301DBV?

Yes. The symbol is Regulator_Linear:TPS72301DBV and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPS72301DBV?

SOT-23-5, with 5 pins. Its footprint is drawn on this page.

Where is the TPS72301DBV datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TPS72301DBV?

JLCPCB lists it as part C34678, with 31,544 in stock; the sellers' links on this page open their listings.

What can replace the TPS72301DBV?

Parts like it in the library: the ME6211C33M5G-N by MICRONE, the SPX3819M5-L-3-3/TR by MaxLinear, the RT9013-33GB by RICHTEK and the XC6219B332MR by UMW. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TPS72301DBV?

15 boards in 11 repositories on GitHub; the most starred are listed on this page, with their KiCad files.