Skip to the content
11

TPS63000DRCR

Texas InstrumentsExtended

-40℃~+85℃@(TA) 1 1.2V~5.5V 1.5MHz 1.8V~5.5V 50uA Adjustable Buck-Boost Buck-Boost Built-in Yes SON-10-EP(3.1x3.1) DC-DC Converters ROHS

Part id
ti/TPS63000DRCR
Category
DC DC Converters
Package
SON-10-EP(3.1x3.1)
Pins
11
In stock
16,114 at JLCPCB (C24966)
Used on
2 open-source boards

Overview

The TPS63000DRCR is a DC DC Converter made by Texas Instruments in a SON-10-EP(3.1x3.1) package with 11 pins. -40℃~+85℃@(TA) 1 1.2V~5.5V 1.5MHz 1.8V~5.5V 50uA Adjustable Buck-Boost Buck-Boost Built-in Yes SON-10-EP(3.1x3.1) DC-DC Converters ROHS.

PCBKit's library has its KiCad symbol (Regulator_Switching:TPS63000, from KiCad's library) and its footprint (Package_SON:Texas_DRC0010J, from KiCad's library), ready for a KiCad board. 16,114 are in stock at JLCPCB (part C24966). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

1VOUT2L23PGND4L15VIN6EN7PS/SYNC8VINA9GND10FB
Regulator_Switching:TPS63000From KiCad's library

Footprint

11
Package_SON:Texas_DRC0010JFrom KiCad's library

From the datasheet

16
Supply, least
1.8 V · VIN, recommended operating min · p. 4
Supply, most
5.5 V · VIN, recommended operating max · p. 4
Supply, absolute maximum
7 V · VIN, absolute max · p. 4
Works from
-40 °C · Operating free air temperature min · p. 4
Works up to
85 °C · Operating free air temperature max · p. 4
Junction, hottest
150 °C · Virtual junction temperature absolute max · p. 4
Takes working
45 µA · sum of VIN, VINA and VOUT typical quiescent currents, no load, VIN = VINA = 3.6 V, VOUT = 3.3 V · p. 5
Takes asleep
100 nA · Shutdown current typical, VEN = 0 V, VIN = VINA = 3.6 V · p. 5
Gives
1.2 A · Output current max at 3.3 V, step-down mode, VIN = 3.6 V to 5.5 V · p. 1
Current limit
1.8 A · Switch current limit typical, VIN = VINA = 3.6 V, TA = 25°C · p. 5
Feedback reference
500 mV · Feedback voltage typical, PS/SYNC = VIN · p. 5
Junction to air (DRC (VSON))
46.8 K/W · Junction-to-ambient thermal resistance · p. 4
Junction to case (DRC (VSON))
62.5 K/W · Junction-to-case top thermal resistance · p. 4
Junction to board (DRC (VSON))
21.4 K/W · Junction-to-board thermal resistance · p. 4
Junction, hottest
125 °C · recommended junction temperature max · p. 16
Junction to air (DRC)
48.7 K/W · junction to ambient, exposed thermal pad soldered · p. 16

What it is and has

4
Efficiency
Up to 96% · p. 1
Protection
Overtemperature protection · p. 1
Shutdown
Load disconnect during shutdown · p. 1
Topology
Four internal N-channel MOSFETs for synchronous conversion · p. 7

Around it

9
cap 10 μF 6.3 V
between VIN and PGND; C1 application example; 0603, X7R ceramic. · p. 10
cap 2 × 10 μF 6.3 V
between VOUT and PGND; C2 application example; 0603, X7R ceramic. · p. 10
cap 0.1 μF
between VINA and GND; C3 application example; X7R ceramic. · p. 10
res 100 Ω
between VIN and VINA; R3 application example. · p. 10
ind VLF4012-2R2
between L1 and L2; L1 application example; TDK. · p. 10
res 200 kΩ
between FB and GND; Recommended R2 value is in this range; must be lower than 500 kΩ. · p. 11
res 1-MΩ
between VOUT and FB; R1 example for 3.3 V output. · p. 11
cap 4.7-μF
between VIN and PGND; Minimum recommended input capacitance; ceramic, placed as close as possible to VIN and PGND. · p. 12
cap 15 µF
between VOUT and PGND; Recommended nominal output capacitance; ceramic, placed as close as possible to VOUT and PGND. · p. 12

Specifications

35
ParameterConditionsAs printedPage
Input voltage on VIN, VINA, L1, L2, VOUT, PS/SYNC, EN, FBOver operating free-air temperature rangemin -0.3 · max 7 V4
Operating virtual junction temperature TJOver operating free-air temperature rangemin -40 · max 150 °C4
Storage temperature Tstgmin -65 · max 150 °C4
Electrostatic discharge V(ESD)Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pinsmax 2000 V4
Electrostatic discharge V(ESD)Charged device model (CDM), per JEDEC specification JESD22-C101, all pinsmax 1000 V4
Supply voltage at VIN, VINAmin 1.8 · max 5.5 V4
Operating free air temperature TAmin -40 · max 85 °C4
Operating virtual junction temperature TJmin -40 · max 125 °C4
Junction-to-ambient thermal resistance RθJADRC (VSON), 10 pinstyp 46.8 °C/W4
Junction-to-case (top) thermal resistance RθJC(top)DRC (VSON), 10 pinstyp 62.5 °C/W4
Junction-to-board thermal resistance RθJBDRC (VSON), 10 pinstyp 21.4 °C/W4
Junction-to-top characterization parameter ψJTDRC (VSON), 10 pinstyp 1.4 °C/W4
Junction-to-board characterization parameter ψJBDRC (VSON), 10 pinstyp 21.5 °C/W4
Junction-to-case (bottom) thermal resistance RθJC(bot)DRC (VSON), 10 pinstyp 4.1 °C/W4
Input voltage range VINOver recommended free-air temperature range and recommended input voltage rangemin 1.8 · max 5.5 V5
Input voltage range for start-up VINOver recommended free-air temperature rangemin 1.9 · max 5.5 V5
TPS63000 output voltage range VOUTTPS63000min 1.2 · max 5.5 V5
TPS63000 feedback voltage VFBTPS63000; PS/SYNC = VINmin 495 · typ 500 · max 505 mV5
Oscillator frequency fmin 1250 · max 1500 kHz5
Frequency range for synchronizationmin 1250 · max 1800 kHz5
Switch current limit ISWVIN = VINA = 3.6 V, TA = 25°Cmin 1600 · typ 1800 · max 2000 mA5
High-side switch ON-resistanceVIN = VINA = 3.6 Vtyp 100 mΩ5
Low-side switch ON-resistanceVIN = VINA = 3.6 Vtyp 100 mΩ5
Line regulationmax 0.5 %5
Load regulationmax 0.5 %5
Quiescent current IqVIN; IOUT = 0 mA, VEN = VIN = VINA = 3.6 V, VOUT = 3.3 Vtyp 1 · max 1.5 uA5
Quiescent current IqVINA; IOUT = 0 mA, VEN = VIN = VINA = 3.6 V, VOUT = 3.3 Vtyp 40 · max 50 uA5
Quiescent current IqVOUT (adjustable output voltage); IOUT = 0 mA, VEN = VIN = VINA = 3.6 V, VOUT = 3.3 Vtyp 4 · max 6 uA5
Shutdown current ISVEN = 0 V, VIN = VINA = 3.6 Vtyp 0.1 · max 1 uA5
Undervoltage lockout threshold VUVLOVINA voltage decreasingmin 1.5 · typ 1.7 · max 1.8 V5
EN, PS/SYNC input low voltage VILmax 0.4 V5
EN, PS/SYNC input high voltage VIHmin 1.2 V5
EN, PS/SYNC input currentClamped on GND or VINAtyp 0.01 · max 0.1 uA5
Overtemperature protectiontyp 140 °C5
Overtemperature hysteresistyp 20 °C5

Pins, by the datasheet

10
1 VOUT
Buck-boost converter output. · p. 3
2 L2
Connection for inductor. · p. 3
3 PGND
Power ground. · p. 3
4 L1
Connection for inductor. · p. 3
5 VIN
Supply voltage for power stage. · p. 3
6 EN
Enable input: 1 enabled, 0 disabled. · p. 3
7 PS/SYNC
Power-save mode: 1 disabled, 0 enabled; accepts clock signal for synchronization. · p. 3
8 VINA
Supply voltage for control stage. · p. 3
9 GND
Control / logic ground. · p. 3
10 FB
Voltage feedback of adjustable versions. · p. 3

Ordering codes, by the datasheet

6
TPS63000DRCR
VSON (DRC) · 10 pins; 3000, LARGE T&R · p. 18
TPS63000DRCR.B
VSON (DRC) · 10 pins; 3000, LARGE T&R · p. 18
TPS63000DRCRG4
VSON (DRC) · 10 pins; 3000, LARGE T&R · p. 18
TPS63000DRCT
VSON (DRC) · 10 pins; 250, SMALL T&R · p. 18
TPS63000DRCT.B
VSON (DRC) · 10 pins; 250, SMALL T&R · p. 18
TPS63000DRCTG4
VSON (DRC) · 10 pins; 250, SMALL T&R · p. 18

Open-source boards using it

2
  • 4 layers73 × 94 mmWirelessBERA, the printed circuit board in 3D

    WirelessBERA

    NathansLab/WirelessBERA

    KiCad 10 project for the Wireless BERA v1.0 board.

    183 parts
  • 4 layersMP3, the printed circuit board in 3D

    MP3

    william-richards1/MP3player

    Board design + code for a raspberry pi based MP3 player, supporting both 3.5mm jack, and LDAC bluetooth encoding.

    68 parts

Parts like it

7

Questions

Is there a KiCad symbol and footprint for the TPS63000DRCR?

Yes. The symbol is Regulator_Switching:TPS63000 and the footprint Package_SON:Texas_DRC0010J, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPS63000DRCR?

SON-10-EP(3.1x3.1), with 11 pins. Its footprint is drawn on this page.

Where is the TPS63000DRCR datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TPS63000DRCR?

JLCPCB lists it as part C24966, with 16,114 in stock; the sellers' links on this page open their listings.

What can replace the TPS63000DRCR?

Parts like it in the library: the TPS63001DRC by Texas Instruments, the TPS54260DRC by Texas Instruments, the TPS63002DRCR by Texas Instruments and the TPS63000DRCT by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TPS63000DRCR?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.