Skip to the content

TPS62822DLCR

Texas InstrumentsExtended

-40℃~+125℃@(TJ) 1 2.2MHz 2.4V~5.5V 2A 4uA 600mV~4V Adjustable Buck Buck Built-in Yes VSON-8(1.5x2) DC-DC Converters ROHS

Part id
ti/TPS62822DLCR
Category
DC DC Converters
Package
VSON-8(1.5x2)
Pins
8
In stock
2,512 at JLCPCB (C473385)
Used on
2 open-source boards

Overview

The TPS62822DLCR is a DC DC Converter made by Texas Instruments in a VSON-8(1.5x2) package with 8 pins. -40℃~+125℃@(TJ) 1 2.2MHz 2.4V~5.5V 2A 4uA 600mV~4V Adjustable Buck Buck Built-in Yes VSON-8(1.5x2) DC-DC Converters ROHS.

PCBKit's library has its KiCad symbol (Regulator_Switching:TPS62822DLC, from KiCad's library) and its footprint (Package_SON:Texas_VSON-HR-8_1.5x2mm_P0.5mm, from KiCad's library), ready for a KiCad board. 2,512 are in stock at JLCPCB (part C473385). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

1EN2FB3AGND5PGND6SW7VIN8PG
Regulator_Switching:TPS62822DLCFrom KiCad's library

Footprint

Package_SON:Texas_VSON-HR-8_1.5x2mm_P0.5mmFrom KiCad's library

From the datasheet

15
Supply, least
2.4 V · VIN, recommended operating min · p. 4
Supply, most
5.5 V · VIN, recommended operating max · p. 4
Supply, absolute maximum
6 V · VIN, absolute max · p. 4
Junction, hottest
150 °C · Junction temperature, absolute max · p. 4
Takes working
4 µA · VIN quiescent current, typical; EN high, no load, device not switching · p. 5
Takes asleep
50 nA · Shutdown current, typical; EN low, TJ = -40°C to 85°C · p. 5
Gives
2 A · TPS62822 continuous output current, max · p. 4
Current limit
3.3 A · TPS62822 high-side FET current limit, typical · p. 5
A pin gives at most
1 mA · PG sink current, absolute max · p. 4
Feedback reference
600 mV · FB feedback voltage, typical; PWM mode · p. 5
Switches at
2.2 MHz · PWM switching frequency, typical · p. 5
Junction to air (DLC (VQFN) 8 PINS)
114.1 K/W · Junction-to-ambient, JEDEC PCB · p. 4
Junction to air (DLC (VQFN) 8 PINS)
69.9 K/W · Junction-to-ambient, TPS6282xEVM-005 · p. 4
Junction to board (DLC (VQFN) 8 PINS)
43.4 K/W · Junction-to-board, JEDEC PCB · p. 4
Junction to case (DLC (VQFN) 8 PINS)
90.2 K/W · Junction-to-case top, JEDEC PCB · p. 4

What it is and has

13
Control topology
DCS-Control · p. 1
Adjustable output voltage
0.6 V to 4 V · p. 1
Status and control
Enable and power good · p. 1
Duty cycle
100% duty-cycle mode · p. 1
Soft-start
Internal soft-start circuitry · p. 1
Power save
Seamless power save mode transition · p. 1
Protection
Undervoltage lockout · p. 1
Output discharge
Active output discharge · p. 1
Protection
Cycle-by-cycle current limit · p. 1
Protection
HICCUP short-circuit protection · p. 1
Protection
Over temperature protection · p. 1
EMI compliance
CISPR11 class B · p. 1
Package
QFN (8), 2.00 x 1.50 mm · p. 1

Around it

7
ind 470 nH ±20%
between SW and VOUT; Typical application L1: 7.6mΩ DCR, 6.6A ISAT; XFL4015-471MEB. · p. 10
cap 4.7 µF ±20%
between VIN and PGND; C1: 6.3V ceramic, 0603, X7R; place as close as possible to VIN and PGND. · p. 10
cap 10 µF ±20%
between VOUT and PGND; C2: 10V ceramic, 0603, X7R. · p. 10
cap 120pF ±5%
between VOUT and FB; Optional feed-forward capacitor Cff: 50V, 0603. · p. 10
res Depending on VOUT
between VOUT and FB; Feedback divider upper resistor R1, chip, 0603. · p. 10
res 100-kΩ
between VPG and PG; Power good pull-up R3: chip, 0603, 0.1W, 1%. · p. 10
cap 2x10µF (or 1x 22µF)
between VOUT and PGND; Recommended typical output capacitance; low ESR ceramic, X7R or X5R; minimum effective capacitance 5uF. · p. 13

Specifications

48
ParameterConditionsAs printedPage
Pin Voltage RangeVIN, FB, EN, PG, NCmin -0.3 · max 6 V4
Pin Voltage RangeSW (DC); maximum VIN + 0.3 Vmin -0.3 V4
Pin Voltage RangeSW (DC, in current limit); maximum VIN + 0.3 Vmin -1 V4
Pin Voltage RangeSW (AC), less than 10ns; while switchingmin -2.5 · max 10 V4
Power Good Sink Currentmax 1 mA4
Operating Junction Temperature Range TJmin -40 · max 150 °C4
Storage temperature Tstgmin -65 · max 150 °C4
Electrostatic discharge V(ESD)Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001; value ±2000 Vmin -2000 · max 2000 V4
Electrostatic discharge V(ESD)Charged-device model (CDM), per JEDEC specification JESD22-C101; value ±500 Vmin -500 · max 500 V4
Supply Voltage Range VINmin 2.4 · max 5.5 V4
Output Voltage Range VOUTmin 0.6 · max 4 V4
Maximum Output Current IOUTTPS62822max 2 A4
Operating Junction Temperature TJmin -40 · max 125 °C4
Junction-to-ambient thermal resistance RθJADLC (VQFN) 8 PINS; JEDEC PCBtyp 114.1 °C/W4
Junction-to-ambient thermal resistance RθJADLC (VQFN) 8 PINS; TPS6282xEVM-005typ 69.9 °C/W4
Junction-to-case (top) thermal resistance RθJC(top)DLC (VQFN) 8 PINS; JEDEC PCBtyp 90.2 °C/W4
Junction-to-board thermal resistance RθJBDLC (VQFN) 8 PINS; JEDEC PCBtyp 43.4 °C/W4
Junction-to-top characterization parameter ψJTDLC (VQFN) 8 PINS; JEDEC PCBtyp 6.6 °C/W4
Junction-to-top characterization parameter ψJTDLC (VQFN) 8 PINS; TPS6282xEVM-005typ 4.3 °C/W4
Junction-to-board characterization parameter ψJBDLC (VQFN) 8 PINS; JEDEC PCBtyp 43.7 °C/W4
Junction-to-board characterization parameter ψJBDLC (VQFN) 8 PINS; TPS6282xEVM-005typ 44.2 °C/W4
Input Voltage range VINmin 2.4 · max 5.5 V5
Operating Quiescent Current IQEN=High, IOUT=0A, device not switchingtyp 4 · max 10 uA5
Shutdown Current ISDEN=Low, TJ = -40°C to 85°Ctyp 0.05 · max 0.5 uA5
Undervoltage Threshold VUVLOFalling Input Voltagemin 2.1 · typ 2.2 · max 2.3 V5
Undervoltage Hysteresis VUVLOtyp 160 mV5
Thermal Shutdown Threshold TSDRising Junction Temperaturetyp 150 °C5
Thermal Shutdown Hysteresis TSDtyp 20 °C5
High-Level Threshold Voltage (EN) VHmin 1 V5
Low-Level Threshold Voltage (EN) VLmax 0.4 V5
Input Leakage Current (EN, PG) ILKGEN = High, VPG = 5Vtyp 10 · max 100 nA5
Soft-Start Time tSSTime from EN=High to 95% of VOUT nominaltyp 1.25 ms5
Power Good Lower Threshold Voltage VPGTLRising (VFB vs regulation target)min 94 · typ 96 · max 98 %5
Power Good Lower Threshold Voltage VPGTLFalling (VFB vs regulation target)min 90 · typ 92 · max 94 %5
Power Good Upper Threshold Voltage VPGTHRising (VFB vs regulation target)min 108 · typ 110 · max 112 %5
Power Good Upper Threshold Voltage VPGTHFalling (VFB vs regulation target)min 103 · typ 105 · max 107 %5
Power Good Logic Low Level Output Voltage VPGLIPG = -1mAmax 0.4 V5
Power Good delay tPGDrisingtyp 100 us5
Power Good delay tPGDfallingtyp 20 us5
Switching Frequency FSWPWM Mode Operationtyp 2.2 MHz5
High-Side FET ON-Resistance RDS(on)TPS62822typ 35 mΩ5
Low-Side FET ON-Resistance RDS(on)TPS62821,2,3typ 25 mΩ5
High-Side FET Current Limit ILIMTPS62822min 2.7 · typ 3.3 · max 3.7 A5
Input Leakage Current (FB) ILKG_FBEN=High, VFB=0.6Vtyp 10 · max 50 nA5
Feedback Voltage Accuracy VFBPWM Modemin 594 · typ 600 · max 606 mV5
Output Discharge Current IDISEN=Low, VSW = 0.4Vmin 75 · typ 400 mA5
DC Load RegulationPWM Mode Operationtyp 0.2 %/A5
DC Line RegulationPWM Mode Operationtyp 0.05 %/V5

Pins, by the datasheet

8
1 EN
Enable input: high enables, low disables; do not leave floating. · p. 3
2 FB
Output voltage feedback; connect a resistive voltage divider. · p. 3
3 AGND
Signal ground, internally connected to PGND; can be left floating. · p. 3
4 NC
Internally not connected; connect to VOUT, GND or leave floating. · p. 3
5 PGND
Power ground. · p. 3
6 SW
Switch node connected to the internal MOSFET switches. · p. 3
7 VIN
Supply voltage. · p. 3
8 PG
Power good output; requires a pull-up resistor when used; otherwise leave floating or connect to GND. · p. 8

Open-source boards using it

2
  • 4 layers220 × 120 mmCandidate filled profile, the printed circuit board in 3D

    Candidate filled profile

    misko/prompt2device

    The separate vNext PCB skill and orchestrator package is available alongside the reference workflow below; existing projects keep their accepted toolchain until an explicit migration.

    569 parts3MIT

Parts like it

1

Questions

Is there a KiCad symbol and footprint for the TPS62822DLCR?

Yes. The symbol is Regulator_Switching:TPS62822DLC and the footprint Package_SON:Texas_VSON-HR-8_1.5x2mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPS62822DLCR?

VSON-8(1.5x2), with 8 pins. Its footprint is drawn on this page.

Where is the TPS62822DLCR datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TPS62822DLCR?

JLCPCB lists it as part C473385, with 2,512 in stock; the sellers' links on this page open their listings.

What can replace the TPS62822DLCR?

Parts like it in the library: the TPS62823DLCR by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TPS62822DLCR?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.