Skip to the content

TPS62821DLCR

Texas InstrumentsExtended

-40℃~+125℃@(TJ) 1 1A 2.2MHz 2.4V~5.5V 4uA 600mV~4V Adjustable Buck Built-in Overcurrent Protection、Light load efficient mode、Output discharge、Operating status indication、Cycle-by-cycle current limiting、Hiccup current limiting Step-down type Yes VSON-8(1.5x2) DC-DC Converters ROHS

Part id
ti/TPS62821DLCR
Category
DC DC Converters
Package
VSON-8(1.5x2)
Pins
8
In stock
2,738 at JLCPCB (C469860)
Used on
3 open-source boards

Overview

The TPS62821DLCR is a DC DC Converter made by Texas Instruments in a VSON-8(1.5x2) package with 8 pins. -40℃~+125℃@(TJ) 1 1A 2.2MHz 2.4V~5.5V 4uA 600mV~4V Adjustable Buck Built-in Overcurrent Protection、Light load efficient mode、Output discharge、Operating status indication、Cycle-by-cycle current limiting、Hiccup current limiting Step-down type Yes VSON-8(1.5x2) DC-DC Converters ROHS.

PCBKit's library has its KiCad symbol (Regulator_Switching:TPS62821DLC, from KiCad's library) and its footprint (Package_SON:Texas_VSON-HR-8_1.5x2mm_P0.5mm, from KiCad's library), ready for a KiCad board. 2,738 are in stock at JLCPCB (part C469860). 3 open-source boards in 3 repositories on GitHub use it.

Symbol

1EN2FB3AGND5PGND6SW7VIN8PG
Regulator_Switching:TPS62821DLCFrom KiCad's library

Footprint

Package_SON:Texas_VSON-HR-8_1.5x2mm_P0.5mmFrom KiCad's library

Pinout

8
The pins of the TPS62821DLCR
PinNameType
1ENInput
2FBInput
3AGNDPower in
4NCNot connected
5PGNDPower in
6SWPower out
7VINPower in
8PGOpen collector

Open-source boards using it

3
  • 4 layers58.4 × 22.9 mmQuickfeather board, the printed circuit board in 3D

    Quickfeather board

    QuickLogic-Corp/quick-feather-dev-board

    100% open source dev kit for EOS S3 MCU+eFPGA SoC supported by fully open source SDK and FPGA Toolchain

    101 parts66CC-BY-SA-4.0
  • 4 layers58.4 × 22.9 mmQuickfeather board, the printed circuit board in 3D

    Quickfeather board

    antmicro/quickfeather-dev-board

    This project contains open hardware design files for the QuickFeather development board based on the QuickLogic EOS S3 Sensor Processing Platform.

    101 parts6CC-BY-SA-4.0
  • 2 layers50 × 73 mmMouse Project, the printed circuit board in 3D

    Mouse Project

    cotty52/Mouse

    Custom mouse using PMW3389 sensor and nRF52840 microcontroller

    28 parts1

Parts like it

3

Questions

Is there a KiCad symbol and footprint for the TPS62821DLCR?

Yes. The symbol is Regulator_Switching:TPS62821DLC and the footprint Package_SON:Texas_VSON-HR-8_1.5x2mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPS62821DLCR?

VSON-8(1.5x2), with 8 pins. Its footprint is drawn on this page.

Where is the TPS62821DLCR datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TPS62821DLCR?

JLCPCB lists it as part C469860, with 2,738 in stock; the sellers' links on this page open their listings.

What can replace the TPS62821DLCR?

Parts like it in the library: the TPS62822DLCR by Texas Instruments, the TPS62823DLCR by Texas Instruments and the TPS62821DLCT by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TPS62821DLCR?

3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.